Asus Led Projector B1m Manual

							
LED projector E-Manual1

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

Chapter 3: Using your LED 
projector
Chapter 3:
Using the onscreen 
display menu 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

Launching programs from the 
onscreen display menu
The onscreen display menu contains a set of programs and settings 
designed to maximize your use of the LED projector. You can 
navigate inside the onscreen display menu using the control panel 
buttons on your LED projector or its accompanying remote control. 
To launch options or programs shown on the onscreen display 
menu, just refer to the control panel grid shown as below.
control panel grid 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

Control panel grid
The control panel grid guides you through the process of using the 
control panel buttons to launch active options inside your onscreen 
display menu. It represents the 8 buttons surrounding the 
button on the control panel. 
control panel grid
control panel
color enhancecolor adjustment
color temperature
control panel grid
control panel 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

Using your LED projector for the first 
time
Refer to the following steps when using your LED projector for the 
first time. 
1. Set up your LED projector then press the power button. Wait for 
a few minutes until the ASUS welcome screen appears.
2. Using the control panel buttons, select the language for your 
LED projector.
3. In the Direct Mode control panel grid, select either Normal 
Mode or Demo Mode.
• Normal Mode - Selecting this mode proceeds you to scan 
connected input devices with the LED projector.
• Demo Mode - This mode allows you to view the demo video 
that comes with your LED projector. 
						

							
LED projector E-Manual5

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

Accessing your LED projector’s 
settings
Aside from using the control panel buttons to navigate the onscreen 
display menu, you can also use each of these buttons to launch the 
following LED projector settings:
IMPORTANT! Press Projector Setting on the control panel grid to 
use these functions in the Media Center.
 Power
Press this button to turn the LED projector on or off.
 Brightness
Press this button to adjust the brightness of your projection 
onscreen.
 Keystone
Press this button to correct distorted images resulting from an 
angled projection.
 Main Menu/OK
Press this button to launch the main menu of your LED projector 
settings, to activate a selected item, or exit the current control panel 
grid.
 Volume
Press this button to adjust the volume of the audio file played on 
your LED projector. 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

 Contrast
Press this button to set the difference between lighten or darken 
your projection onscreen.
 Media Center
Press this button to launch the Media Center.
NOTE: For more details, refer to the Using the Media Center section in 
this manual.
 Input
Press this button to scan the connected devices to your LED 
projector.
 Splendid
Press this button to activate either of the following display modes: 
Standard, Blackboard, Whiteboard, Dynamic, sRGB, Theatre, 
Scenary. 
						

							
LED projector E-Manual7

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

 Image Setting
Press this button to access the following image settings:
         
•  Color Temperature - This option allows you to adjust the light 
temperature of your LED projector according to the following 
options: Low, Medium, High.
•  Color Adjustment - This option allows you to adjust the color 
of your screen according to the following settings: Auto, RGB, 
YUV.
•  Color Enhance - This option allows you to enhance the colors 
of your projected image.
• Sharpness - This option allows you to sharpen or soften the 
appearance of the projected image.
• Saturation - This option allows you to adjust the hue of the 
projected image. 
• Tint - This option allows you to shift the colors onscreen 
towards red or green, 
						

							
8LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

 Image Position
Press this button to access the following image position settings:
         
•  Auto Keystone - This option allows you to automatically adjust 
the alignment of your image.
•  Horizontal Positioning - This option allows you to shift the 
image’s position horizontally.
•  Projector Position - This option allows you to adjust the 
position of the projected image based from the location of your 
LED projector.
•  Vertical Positioning - This option allows you to vertically shift 
the image position.
•  Aspect Ratio - This option allows you to change the projection 
of your display according to the following aspect ratios: AUTO, 
4:3, 16:9, and 16:10.
•  Digital Zoom - This option allows you to zoom in or zoom out  
your projected display. It also allows you to pan your image to 
the following directions: left, right, up, or down. 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

•  Aspect Ratio - This option allows you to change the projection 
of your display according to the following aspect ratios: AUTO, 
4:3, 16:9, and 16:10.
•  Digital Zoom - This option allows you to zoom in or zoom out  
your projected display. It also allows you to pan your image to 
the following directions: left, right, up, or down.
• Phase - This option allows you to adjust the number of lines 
emitted by the computer’s signal so that the LED projector 
relative to the computer’s signal. 
• Clock - This option allows you to adjust the frequency of the 
LED projector relative to the computer.  
						

							
0LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

 Setting
Press this button to access the following LED projector settings:
• Information - This option shows you the following information 
about your LED projector: currently used input port, LED 
projector’s model name, and currently used Splendid mode.
•  Reset All - This option allows you to reset all the settings you 
have currently set up for your LED projector. 
•  Menu Timeout - This option allows you to set the timeout 
rate, according to seconds, before the onscreen display menu 
disappers from your projection screen.
•  Eco Mode - This option allows you to enable or disable Eco 
Mode.
• Language - This option allows you to select the language to 
use on your LED projector's onscreen display menu.
•  E-Manual - This option launches the LED projector’s E-Manual.
•  Power Timeout - This option allows you to set the number of 
seconds before your LED projector automatically shuts down 
when not in use. 
• Demo Mode - This option launches the demo video of your LED 
projector.