Asus Led Projector B1m Manual

							
LED projector E-Manual1

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

Chapter 2:
Setting up 
Chapter 2: Setting up 
AV-IN 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

1. Connect the LED projector to the power adapter.
A. Connect the AC/DC power cord to the power adapter.
B. Connect the AC power cord to a power source.
C. Connect the DC power connector to your LED projector.
NOTE: This LED projector is also compatible with ASUS power 
adapters within the 65W to 95W range. 
Operating your LED projector
This portable LED projector allows you to plug and play your devices 
so you can easily open multimedia files, hear audio straight from its 
built-in SonicMaster speakers, and experience using Wi-Fi to project 
onscreen.
For your safety and to maintain the quality of this unit, refer to the 
following steps when operating your LED projector.
AV-IN 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

AC power cord requirements
Use the correct AC plug type according to your current location.
IMPORTANT! Contact your sales dealer if the AC power cord bundled 
with your LED projector does not match your local power source.
NOTE: We highly recommend that you use a video source device that 
also uses a grounding type plug to prevent signal interference due to 
voltage fluctuations.
for Australia and Mainland Chinafor U.S.A., Canada, and Taiwan
for Continental Europefor U.K. 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

2. Connect the LED projector to your device using 
the appropriate port.
A. Headphone output jack port and audio/video input jack port.
AV-IN
B. Memory card reader
AV-IN
NOTE: For details on how to launch files from a memory card, refer to 
the Launching the Media Center section in this manual. 
						

							
LED projector E-Manual5

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

C. HDMI port
AV-IN
AV-IN
D. VGA port 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

D. USB 2.0 port
AV-IN
NOTE: For details on using the USB 2.0 port to launch supported file 
formats, refer to the Launching the Media Center section in this manual.
Compatible USB 2.0 input devices:
USB cableflash driveWi-Fi dongle 
						

							
LED projector E-Manual7

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

4. Adjust the height of the LED projector.
Your LED projector comes with a built-in stand that helps adjust the 
image height onscreen.
WARNING! Ensure that the built-in stand is fully retracted before 
placing the LED projector inside the projector bag. 
NOTES:
• Place the LED projector on a stable flat surface.
• Keep a space of 30 cm or more between the sides of the LED 
projector. 
• Consult your dealer for special installation procedures like 
suspending the LED projector from the ceiling. 
						

							
8LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

Screen size and projection distance table
Adjust the LED projector’s distance from the screen using the table 
below.
projection distance
LED projector
screen size
Screen size  - 16:10Projection distance
(inches)(millimeters)(meters)
307620.58
4010160.78
6015241.16
8020321.55
10025401.94
12030482.33
14035562.71
16040643.10 
						

							
LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12DRAFT 2   12/17/12
DRAFT 2   12/17/12

3. Press the power button.
AV-IN 
						

							
0LED projector E-Manual

DRAFT 2   12/17/12
DRAFT 2   12/17/12

DRAFT 2   12/17/12

5. Adjust the image focus.
Move the focus ring to the left or to the right to adjust the image 
focus. 
NOTE: Use a still image when adjusting the onscreen display.
AV-IN
AV-IN