Apple studio display 15 lcd adc User Manual
Here you can view all the pages of manual Apple studio display 15 lcd adc User Manual. The Apple manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 1
© 2002 Apple Computer, Inc. All rights reserved.
Service Source
Apple Studio Display 15” LCD
(ADC)
Page 2
Apple Studio Display 15” (ADC) - 1 Apple Studio Display 15” LCD (ADC)
Page 3
© 2002 Apple Computer, Inc. All rights reserved. Service Source Take Apart Studio Display 15” LCD (ADC)
Page 4
Studio Display 15” LCD (ADC) Take Apart - 1 Tools Tools The following tools are recommended for the take apart procedures. • 2mm hex • phillips #2 screwdriver • jeweler’s screwdriver set • ESD wriststrap and mat • white cotton gloves (922-1592) • nylon probe tool (922-5065)
Page 5
2 Studio Display 15” (ADC) Take Apart Foot Assembly Foot Assembly Tools This procedure requires the following tools: • 2mm hex driver • White gloves for handling plastics Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat or soft cloth. Note: Plastics are easily damaged. The white gloves prevent fingerprints.
Page 6
Studio Display 15” LCD (ADC) Take Apart - 3 Foot Assembly Procedure 1. Remove three screws. 2. Lift the clear hinge cap from the display.
Page 7
4 Studio Display 15” (ADC) Take Apart Back Cover Back Cover Tools This procedure requires the following tools: • 2mm hex driver • White gloves for handling plastics Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat • Remove the foot assembly
Page 8
Studio Display 15” LCD (ADC) Take Apart - 5 Back Cover Procedure 1. Remove four T-8 screws on the back cover. Remove the back cover. 2. Lift and remove the inner back cover.
Page 9
6 Studio Display 15” (ADC) Take Apart Rear Shield Rear Shield Tools • Phillips #2 Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat • Remove the foot assembly. • Remove the back cover and inner rear cover.
Page 10
Studio Display 15” LCD (ADC) Take Apart - 7 Rear Shield Procedure 1. Remove the plastic USB trim ring. 2. Remove three Phillips screws on the shield.