Apple power mac g4 gigabit ethernet User Manual
Have a look at the manual Apple power mac g4 gigabit ethernet User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Take ApartPower Supply, Power Mac G4 (QuickSilvers) - 119 6. Maneuver the power supply and its cables out of the chassis.
Take ApartPower Supply, Power Mac G4 (QuickSilvers) - 120 Replacement Note: If you are replacing the power supply, remove the power supply bracket and reattach it to the new power supply.
Take ApartPower Supply, Power Mac G4 (QuickSilvers) - 121 Replacement Note: You must set the power supply voltage switch to the correct setting (115 V in North America) to avoid damaging the computer.
Take ApartPower Supply, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 122 Power Supply, PCI/ AGP Graphics/Gigabit Ethernet/Digital Audio Before you begin, do the following: ¥ Open the side access panel. ¥ Remove the CD/DVD drive bezel. ¥ Move the CD/DVD/Zip drive carrier forward 1 inch.
Take ApartPower Supply, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 123 1. Disconnect the power- to-fan connector.
Take ApartPower Supply, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 124 2. Disconnect the following power cables: ¥cables P6 and P7 from the CD-ROM/Zip drive ¥Power Mac G4 (PCI Graphics): cable P4 from the front panel board ¥main power cable from the logic board ¥cable(s) to hard drives
Take ApartPower Supply, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 125 3. Using a 2.5 mm Allen wrench, remove the three screws on the rear vented panel.
Take ApartPower Supply, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 126 4. On the inside of the chassis, remove the screw that attaches the power supply to the power supply shelf. 5. Slide the power supply forward toward the front of the computer. Maneuver the power supply (clearing the security bar on the inside and upper chassis) and its cables out of the chassis. Note: If you are replacing the power supply, remove the power supply bracket
Take ApartPower Supply, PCI/AGP Graphics/Gigabit Ethernet/Digital Audio - 127 and reattach it to the new power supply. Replacement Note: You must set the power supply voltage switch to the correct setting (115 V in the U.S.) to avoid damaging the computer.
Take ApartSpeaker, Power Mac G4 (QuickSilvers) - 128 Speaker, Power Mac G4 (QuickSilvers) Before you begin, do the following: ¥ Open the side access panel. ¥ Remove the carrier support plate.