Apple power mac g4 fw 800 User Manual
Have a look at the manual Apple power mac g4 fw 800 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Power Mac G4 (Mirror/FW 800) Take Apart - 9 Top Panel Procedure 1. Slide the top panel toward the front of the computer to unhook the six tabs. 2. Lift the top panel from the chassis.
10 - Power Mac G4 (Mirror/FW 800) Take Apart Speaker Grill Speaker Grill Tools The only tool required for this procedure is a small flat-blade screwdriver. Part Location Preliminary Steps There are no preliminary steps for this procedure.
Power Mac G4 (Mirror/FW 800) Take Apart - 11 Speaker Grill Procedure 1. Insert the tip of a screwdriver into one of the openings in the speaker grill. Warning: To prevent damage to the speaker, do not insert the screwdriver too far. 2. Pry out the speaker grill. Replacement Note: Press the replacement speaker grill into the speaker opening.
12 - Power Mac G4 (Mirror/FW 800) Take Apart Lower Supports Lower Supports Tools The only tool required for this procedure is a 2.5 mm Allen wrench. Part Location Preliminary Steps Before you begin, place the computer upside down on an ESD mat. Warning: When the computer is upside down or the lower supports are removed, the computer can be unstable.
Power Mac G4 (Mirror/FW 800) Take Apart - 13 Lower Supports Procedure 1. With the computer upside down, remove the two Allen screws securing the support to the computer. 2. Remove the support from the computer.
14 - Power Mac G4 (Mirror/FW 800) Take Apart Lower Panel, Front Lower Panel, Front Tools No tools are required for this procedure. Part Location Preliminary Steps Before you begin, remove the lower front support. Warning: When the computer is upside down or the lower support is removed, the computer can be unstable.
Power Mac G4 (Mirror/FW 800) Take Apart - 15 Lower Panel, Front Procedure 1. Lift the lower front panel from the chassis. There are no screws holding this panel to the chassis; the front support holds it in place. 2. Important: Note the routing of the AirPort antenna cable. Carefully remove it from the notches in the lower front panel.
16 - Power Mac G4 (Mirror/FW 800) Take Apart Lower Panel, Rear Lower Panel, Rear Tools No tools are required for this procedure. Part Location Preliminary Steps Before you begin, remove the lower rear support. Warning: When the computer is upside down or the lower support is removed, the computer can be unstable.
Power Mac G4 (Mirror/FW 800) Take Apart - 17 Lower Panel, Rear Procedure Lift the lower rear panel from the chassis. There are no screws holding this panel to the chassis; the rear support holds it in place.
18 - Power Mac G4 (Mirror/FW 800) Take Apart Rear Vented Panel Rear Vented Panel Tools The following tools are required for this procedure: • 2.5 mm Allen wrench • Flat-blade screwdriver Part Location Preliminary Steps Before you begin, remove the following: • Lower rear support • Lower rear panel • Top rear handle Warning: When the computer is upside down or the lower supports are removed, the computer can be unstable.