Apple power mac g4 fw 800 User Manual
Here you can view all the pages of manual Apple power mac g4 fw 800 User Manual. The Apple manuals for Personal Computer are available online for free. You can easily download all the documents as PDF.
Page 11
Power Mac G4 (Mirror/FW 800) Take Apart - 9 Top Panel Procedure 1. Slide the top panel toward the front of the computer to unhook the six tabs. 2. Lift the top panel from the chassis.
Page 12
10 - Power Mac G4 (Mirror/FW 800) Take Apart Speaker Grill Speaker Grill Tools The only tool required for this procedure is a small flat-blade screwdriver. Part Location Preliminary Steps There are no preliminary steps for this procedure.
Page 13
Power Mac G4 (Mirror/FW 800) Take Apart - 11 Speaker Grill Procedure 1. Insert the tip of a screwdriver into one of the openings in the speaker grill. Warning: To prevent damage to the speaker, do not insert the screwdriver too far. 2. Pry out the speaker grill. Replacement Note: Press the replacement speaker grill into the speaker opening.
Page 14
12 - Power Mac G4 (Mirror/FW 800) Take Apart Lower Supports Lower Supports Tools The only tool required for this procedure is a 2.5 mm Allen wrench. Part Location Preliminary Steps Before you begin, place the computer upside down on an ESD mat. Warning: When the computer is upside down or the lower supports are removed, the computer can be unstable.
Page 15
Power Mac G4 (Mirror/FW 800) Take Apart - 13 Lower Supports Procedure 1. With the computer upside down, remove the two Allen screws securing the support to the computer. 2. Remove the support from the computer.
Page 16
14 - Power Mac G4 (Mirror/FW 800) Take Apart Lower Panel, Front Lower Panel, Front Tools No tools are required for this procedure. Part Location Preliminary Steps Before you begin, remove the lower front support. Warning: When the computer is upside down or the lower support is removed, the computer can be unstable.
Page 17
Power Mac G4 (Mirror/FW 800) Take Apart - 15 Lower Panel, Front Procedure 1. Lift the lower front panel from the chassis. There are no screws holding this panel to the chassis; the front support holds it in place. 2. Important: Note the routing of the AirPort antenna cable. Carefully remove it from the notches in the lower front panel.
Page 18
16 - Power Mac G4 (Mirror/FW 800) Take Apart Lower Panel, Rear Lower Panel, Rear Tools No tools are required for this procedure. Part Location Preliminary Steps Before you begin, remove the lower rear support. Warning: When the computer is upside down or the lower support is removed, the computer can be unstable.
Page 19
Power Mac G4 (Mirror/FW 800) Take Apart - 17 Lower Panel, Rear Procedure Lift the lower rear panel from the chassis. There are no screws holding this panel to the chassis; the rear support holds it in place.
Page 20
18 - Power Mac G4 (Mirror/FW 800) Take Apart Rear Vented Panel Rear Vented Panel Tools The following tools are required for this procedure: • 2.5 mm Allen wrench • Flat-blade screwdriver Part Location Preliminary Steps Before you begin, remove the following: • Lower rear support • Lower rear panel • Top rear handle Warning: When the computer is upside down or the lower supports are removed, the computer can be unstable.