Apple led cinema display 24inch User Manual
Here you can view all the pages of manual Apple led cinema display 24inch User Manual. The Apple manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 71
LED Cinema Display (24-inch) Take Apart — Subwoofer 71 2010-11-25 Removal 1 Remove 4 screws: T10, 922-8681 2 Peel up tape and disconnect 2-pin subwoofer cable from logic board Replacement Reassembly is an exact reversal of the steps. Note: If you have trouble reconnecting cables to the logic board, unscrew and flip over logic board for better access to connectors.
Page 72
LED Cinema Display (24-inch) Take Apart — AC Inlet 72 2010-11-25 First Steps Remove: • G lass Panel • L CD Panel • Sub woofer Note: AC Inlet is not available as a separate part, but only as part of the Rear Housing. Tools • ESD wrist strap • T orx T10 screwdriver AC Inlet
Page 73
LED Cinema Display (24-inch) Take Apart — AC Inlet 73 2010-11-25 Removal 1 Remove 4 screws: T10, 922-8685 (3) T10, 922-8683 (1) on grounding wire 2 Loosen or remove tape on cables and pressure wall. 3 Disconnect cable from power supply. Reassembly Reassembly is an exact reversal of the steps.
Page 74
LED Cinema Display (24-inch) Take Apart — All-in-One Cable 74 2010-11-25 First Steps Remove: • G lass Panel • L CD Panel • Sub woofer • A C Inlet Tools • ESD wrist strap • T orx T10 screwdriver All-in-One Cable
Page 75
LED Cinema Display (24-inch) Take Apart — All-in-One Cable 75 2010-11-25 Removal 1 Remove 2 screws: T10, 922-8685 and metal strain relief support (922-8689) 2 Loosen or remove tape on cables. Aluminum tape can be fragile. 3 Disconnect black cable from the power supply. 4 Disconnect USB uplink cable from the logic board. 5 Pry up ferrite beads with a black stick. 6 Push the all-in-one cable through the opening in the rear housing, feeding the three cable ends through the hole one at a...
Page 76
LED Cinema Display (24-inch) Take Apart — Speakers 76 2010-11-25 First Steps Remove: • G lass Panel • L CD Panel Note: Left Speaker and Right Speaker are available as separate parts, but are also included as part of a replacement Rear Housing. Tools • ESD wrist strap • black stick (9 22-5065) Speakers
Page 77
LED Cinema Display (24-inch) Take Apart — Speakers 77 2010-11-25 Removal 1 Using a black stick, pry the speaker away from the rear housing. Caution: Adhesive is very strong and may require superhuman force to remove. 2 Disconnect cable from logic board. Replacement 1 Align speaker with magnet and press to secure adhesive. 2 Connect cable to logic board. Note: Left speaker has a 4-pin connector and right speaker has a 3-pin connector. Note: If you have trouble reconnecting...
Page 78
LED Cinema Display (24-inch) Take Apart — Stand 78 2010-11-25 First Steps Remove: • G lass Panel • L CD Panel Note: If Stand is the only part to be replaced, use VESA Mount procedure rather than removing Glass Panel and LCD Panel. Tools • ESD wrist strap • T orx T10 screwdriver Stand
Page 79
LED Cinema Display (24-inch) Take Apart — Stand 79 2010-11-25 Removal 1 Remove 8 screws along back row of mechanism: T10, 922-8749 2 Tilt rear housing forward to release stand.
Page 80
LED Cinema Display (24-inch) Take Apart — Stand 80 2010-11-25 Replacement Reassembly is an exact reversal of the steps. Note: Slide rear housing over stand, aligning pin on mechanism with center hole on stand. Replacement Note: If replacing stand, transfer serial number to new part.