Apple led cinema display 24inch User Manual
Have a look at the manual Apple led cinema display 24inch User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
LED Cinema Display (24-inch) Take Apart — Subwoofer 71 2010-11-25 Removal 1 Remove 4 screws: T10, 922-8681 2 Peel up tape and disconnect 2-pin subwoofer cable from logic board Replacement Reassembly is an exact reversal of the steps. Note: If you have trouble reconnecting cables to the logic board, unscrew and flip over logic board for better access to connectors.
LED Cinema Display (24-inch) Take Apart — AC Inlet 72 2010-11-25 First Steps Remove: • G lass Panel • L CD Panel • Sub woofer Note: AC Inlet is not available as a separate part, but only as part of the Rear Housing. Tools • ESD wrist strap • T orx T10 screwdriver AC Inlet
LED Cinema Display (24-inch) Take Apart — AC Inlet 73 2010-11-25 Removal 1 Remove 4 screws: T10, 922-8685 (3) T10, 922-8683 (1) on grounding wire 2 Loosen or remove tape on cables and pressure wall. 3 Disconnect cable from power supply. Reassembly Reassembly is an exact reversal of the steps.
LED Cinema Display (24-inch) Take Apart — All-in-One Cable 74 2010-11-25 First Steps Remove: • G lass Panel • L CD Panel • Sub woofer • A C Inlet Tools • ESD wrist strap • T orx T10 screwdriver All-in-One Cable
LED Cinema Display (24-inch) Take Apart — All-in-One Cable 75 2010-11-25 Removal 1 Remove 2 screws: T10, 922-8685 and metal strain relief support (922-8689) 2 Loosen or remove tape on cables. Aluminum tape can be fragile. 3 Disconnect black cable from the power supply. 4 Disconnect USB uplink cable from the logic board. 5 Pry up ferrite beads with a black stick. 6 Push the all-in-one cable through the opening in the rear housing, feeding the three cable ends through the hole one at a time. Replacement Reassembly is an exact reversal of the steps.
LED Cinema Display (24-inch) Take Apart — Speakers 76 2010-11-25 First Steps Remove: • G lass Panel • L CD Panel Note: Left Speaker and Right Speaker are available as separate parts, but are also included as part of a replacement Rear Housing. Tools • ESD wrist strap • black stick (9 22-5065) Speakers
LED Cinema Display (24-inch) Take Apart — Speakers 77 2010-11-25 Removal 1 Using a black stick, pry the speaker away from the rear housing. Caution: Adhesive is very strong and may require superhuman force to remove. 2 Disconnect cable from logic board. Replacement 1 Align speaker with magnet and press to secure adhesive. 2 Connect cable to logic board. Note: Left speaker has a 4-pin connector and right speaker has a 3-pin connector. Note: If you have trouble reconnecting cables, unscrew and flip over logic board for better access. 3 Secure cable with tape.
LED Cinema Display (24-inch) Take Apart — Stand 78 2010-11-25 First Steps Remove: • G lass Panel • L CD Panel Note: If Stand is the only part to be replaced, use VESA Mount procedure rather than removing Glass Panel and LCD Panel. Tools • ESD wrist strap • T orx T10 screwdriver Stand
LED Cinema Display (24-inch) Take Apart — Stand 79 2010-11-25 Removal 1 Remove 8 screws along back row of mechanism: T10, 922-8749 2 Tilt rear housing forward to release stand.
LED Cinema Display (24-inch) Take Apart — Stand 80 2010-11-25 Replacement Reassembly is an exact reversal of the steps. Note: Slide rear housing over stand, aligning pin on mechanism with center hole on stand. Replacement Note: If replacing stand, transfer serial number to new part.