Apple ibook g4 14 early 2004 User Manual
Have a look at the manual Apple ibook g4 14 early 2004 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
© 2003 Apple Computer, Inc. All rights reserved. Service Source iBook G4 (14-inch) iBook G4 (14-inch) iBook G4 (14-inch Early 2004) Updated June 19, 2006
© 2003 Apple Computer, Inc. All rights reserved. Service Source Take Apart iBook G4 (14-inch) iBook G4 (14-inch Early 2004)
iBook G4 (14-inch) Take Apart - 2 General Information General Information Overview To easily distinguish this computer from previous iBook models, note these characteristics: • iBook G4 identifier on display bezel • Slot-load optical drive • Mac OS X version 10.3 operating system
3 - iBook G4 (14-inch) Take Apart General Information The ports on the left side of the computer are • RJ11 modem port • Ethernet port • FireWire port • Two USB ports • External display connector • Headphone port This table shows the iBook G4 (14-inch) configurations at initial product introduction: * For servicing the 12.1-inch models, refer to the iBook G4 service manual. This table shows the iBook G4 (14-inch Early 2004) configurations at initial product introduction: * For servicing the 12.1-inch model, refer to the iBook G4 service manual. ConfigurationEducation*Good*BetterBest Display Size12.1 inch 12.1 inch 14.1 inch 14.1 inch Video RAM 32 VRAM 32 VRAM 32 VRAM 32 VRAM Processor800 MHz 800 MHz 933 MHz 1 GHz Optical DriveCD-ROMCombo (DVD- ROM/CD-RW)Combo (DVD- ROM/CD-RW)Combo (DVD- ROM/CD-RW) Hard Drive 30 GB 30 GB 40 GB 60 GB Memory128 MB RAM 256 MB RAM 256 MB RAM 256 MB RAM ConfigurationGood*BetterBest Display Size12.1 inch 14.1 inch 14.1 inch Video RAM 32 VRAM 32 VRAM 32 VRAM Processor1.0 GHz 1.0 GHz 1.2 GHz Optical DriveCombo (DVD- ROM/CD-RW)Combo (DVD- ROM/CD-RW)Combo (DVD- ROM/CD-RW) Hard Drive 30 GB 40 GB 60 GB Memory256 MB RAM 256 MB RAM 256 MB RAM
iBook G4 (14-inch) Take Apart - 4 General Information New Procedures If you are familiar with taking apart iBook computers, you will notice some differences with this iBook model: • Slot-load optical drive • AirPort Extreme Card option • Bluetooth option • The number and types of screws differ somewhat from previous models. Note: The metal EMI shields—bottom shield and top shield—are now marked with screw identifiers for most of the screw locations. The screw identifiers are in the form of M2x_ where the last digit indicates the approximate screw length. For example, a marking of M2x3 indicates a 3.5-mm long screw, and a marking of M2x14 indicates a 14.5-mm long screw. Use the identifiers as a guide when reassembling the computer. Tools The following tools are recommended for the Take Apart procedures: • Coin • ESD wriststrap and mat • Magnetized #0 Phillips screwdriver • Jeweler’s flat-blade screwdriver • Small soft cloth • Torx T8 screwdriver • 2.0 mm hex nut driver • Needlenose pliers • Torx T6 screwdriver • 5/32 hex driver • Black stick (or other nonconductive nylon or plastic tool)
5 - iBook G4 (14-inch) Take Apart General Information Note: To organize the screws you remove from the assembly, use a tray with divided compartments (such as a plastic ice cube tray). Serial Number Location In this computer, the product serial number is located in two places: the battery bay and the top case underneath the keyboard.
iBook G4 (14-inch) Take Apart - 6 Battery Battery Tools The only tool required for this procedure is a coin. Part Location Preliminary Steps Warning: Always shut down the computer before opening it to avoid damaging its internal components or causing injury. After you shut down the computer, the internal components can be very hot. Let the computer cool down for 30 minutes before continuing. Procedure Warning: If the computer has been recently operating, allow it to cool down before performing this procedure. 1. Place the computer on a clean, flat surface. 2. Shut down the computer and wait thirty minutes before continuing.
7 - iBook G4 (14-inch) Take Apart Battery 3. Disconnect the power cord and any other cables connected to the computer. 4. Close the computer, turn it over, and locate the battery latch. Use a coin to turn the battery latch 1/4 turn clockwise to unlock the battery. Gently remove the battery. Removing the battery will prevent you from accidentally turning on the computer. Warning: Removing the battery before shutting down the computer may result in data loss. 5. Install the replacement battery. 6. Reconnect the power cord and any other cables that were connected and restart the computer. Note: You may need to reset the date and time (using the Date & Time control panel in System Preferences). Warning: Never turn on the computer unless all of its internal and external parts are in place and it is fully reassembled. Operating the computer when it is missing parts can damage the computer or cause injury.
iBook G4 (14-inch) Take Apart - 8 Foot and Foot Socket Foot and Foot Socket Tools • Foot kit • Soft cloth • Needlenose pliers • #0 Phillips jeweler’s screwdriver Caution: To avoid scratching the case, use caution when using tools to remove and replace the foot and foot socket. Part Location Preliminary Steps Warning: Always shut down the computer before opening it to avoid damaging its internal components or causing injury. After you shut down the computer, the internal components can be very hot. Let the computer cool down for 30 minutes before continuing.
9 - iBook G4 (14-inch) Take Apart Foot and Foot Socket Procedure 1. Place the computer on a clean, flat surface or soft cloth. 2. Shut down the computer and wait thirty minutes before continuing. 3. Disconnect the power cord and any other cables connected to the computer. 4. Close the computer, turn it over, and locate the foot that needs replacement. 5. Caution: To avoid scratching the case, use caution when using tools to remove and replace the foot. If any portion of the rubber foot remains on the bottom case, use tweezers or needlenose pliers to carefully remove it. 6. Use a screwdriver to remove the screw and socket from the bottom case.