Apple cinema display 22 lcd User Manual
Here you can view all the pages of manual Apple cinema display 22 lcd User Manual. The Apple manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 1
© 2003 Apple Computer, Inc. All rights reserved. Service Source Apple Cinema Display 22 LCD (ADC) 11 April 2003
Page 2
© 2003 Apple Computer, Inc. All rights reserved. Service Source Take Apart Apple Cinema Display 22 LCD (ADC)
Page 3
Apple Cinema Display 22 (ADC) Take Apart - 1 Tools Tools The following tools are recommended for the take apart procedures. • 2 mm hex key • #2 Phillips screwdriver • jeweler’s #1 Phillips screwdriver • ESD wriststrap and mat • white cotton gloves (922-1592) • nylon probe tool (922-5065) Important: The display plastics, inside and out, retain fingerprints and can scratch easily. Be very careful with tools, lay the display and plastic parts only on a clean soft surface, and wear clean...
Page 4
2 - Apple Cinema Display 22 (ADC) Take Apart Foot Assembly Foot Assembly Tools This procedure requires the following tools: • 2 mm hex key • White gloves for handling plastics Part Location Preliminary Steps Before you begin, do the following: • Place the display face down on an ESD mat or soft cloth Note: Plastics are easily damaged. The white gloves prevent fingerprints.
Page 5
Apple Cinema Display 22 (ADC) Take Apart - 3 Foot Assembly Procedure 1. Remove three hex screws. 2. Lift the foot off the hinge. 3. The clear hinge cap may fall off the foot. If it doesn’t, remove it from the foot. 4. Pull the ADC (Apple Display Connector) cable through the opening in the foot to separate the foot and the cable.
Page 6
4 - Apple Cinema Display 22 (ADC) Take Apart Rear Cover Rear Cover Tools This procedure requires the following tools: • 2 mm hex key • White gloves for handling plastics Note: Plastics are easily damaged. The white gloves prevent fingerprints. Part Location Preliminary Steps Before you begin, do the following: • Place the display face down on an ESD mat • Remove the foot assembly
Page 7
Apple Cinema Display 22 (ADC) Take Apart - 5 Rear Cover Procedure 1. Remove eighteen hex screws on the rear cover. 2. Lift the rear cover slightly and disconnect the power/brightness switch cable connector, shown below. Carefully pull the ADC cable through the rear cover. Note: The power/brightness switch board is permanently attached to the rear cover and cannot be removed. Replacement Note: Verify that the clear plastic USB cover is in place over the USB socket, and that the USB...
Page 8
6 - Apple Cinema Display 22 (ADC) Take Apart Hinge Hinge Tools This procedure requires the following tools: • #2 Phillips screwdriver Part Location Preliminary Steps Before you begin, do the following: • Place the display face down on an ESD mat • Remove the foot assembly • Remove the rear cover
Page 9
Apple Cinema Display 22 (ADC) Take Apart - 7 Hinge Procedure 1. Remove four screws. Note: Two of the screws are yellow. These screws are for the ADC cable. 2. Pull the ADC cable out of the way and remove two more hinge screws. 3. Lift the hinge up and off the chassis. Replacement Note: The hinge has locators on it, so it seats correctly in the chassis.
Page 10
8 - Apple Cinema Display 22 (ADC) Take Apart Main Board Shield Main Board Shield Tools This procedure requires the following tools: • #2 Phillips screwdriver Part Location Preliminary Steps Before you begin, do the following: • Place the display face down on an ESD mat • Remove the foot assembly and hinge cover • Remove the rear cover