AOC V27m Operation Instructions

 
 
 
 
 
 
 Operating Instructions 
 
V27m 
27” Multimedia Function Display 
 
 
 

 
2 nded that you read the contents of this manual carefully before 
ect to 
 
 
 
 
 
 
 
 
 
Thank you for choosing an AOC LCD Monitor. 
 
It is recomme
installing and turning on the monitor. Please keep this manual for future 
reference.  
 
N
ote: Our products are under continuous development and are subj
change without notice.   
 
*  The monitor may not be an exact match to the illustrations in this 
manual. But the monitor is the standard. 
 
 

 3 
Operating Instructions 
Con
Sou
Usin
Function settings .............................................................20  
 
Content 
Important safety notes ..............................................................5  
Read these notes before operating the device. .................5 
nection and preparation of the monitor ...............................7 
Parts list ........................................................................\
.....7  
Installation of the base...

 
Tips........................................................................\
.................21
4 
China RoHS Regulation Marking Requirements .....................27  Product Specifications ............................................................22 Supported Resolution.............................................................23 Troubleshooting......................................................................25...

 
Important safety notes 
5 
before operating the device. 
 
ly and contact t he authorized distributor. 
 
anent 
 
ocket.  ched, particularly near the 
er, or supplied with . When a cart is used, use caution 
when moving the cart/apparat n to avoid the device being tipped 
over. 
Re ad these notes 
1.  Read these notes. 
2.
  Follow these notes. 
3.
 Heed all warnings. 
4.  Operate as per instructions. 
5.  Do not use this apparatus near water  (for example, near the bathtub, kitchen
si nk, washbasin,...

 
16.
6 
ing is 
ain or moisture, or it has been dropped.   
17.  Th r ental factors should be 
ta  i disposal or recycling 
in  Electronic Industries Alliance: 
w e
  All servicing must be carried out by pr ofessional service personnel. Servic
req
uired if the device does not work normally, or has been damaged in some 
way. For example, if the power cord has been damaged, if liquid has been 
spilled on it, it has been exposed to r
e p oduct may contain lead or mercury. Environm
ken nto account when you...

 
Connect
7 
ion and preparation of the monitor 
Parts list 
 
  
AOC V27m Bracket Base + Screws 
    
 
Cleaning cloth  Power cord  VGA cable 
    
   
Warran  card Operating Instructions 
CD-ROM  Quick Installation Guide
ty
    
 
 
HDMI cable  Audio cable  Screws 
 
 

 
Connection and prep
8 
aration of the monitor 
e 
table. Tighten 
Installation of the bas
Take the monitor and the base out of the carton and assemble them, as 
shown in the figure below: 
1.
  Place the monitor face down on a soft cloth or pad on the 
the screws in the base to se cure the base and bracket. 
2.  Inset the base into the hole on the bottom of the monitor. 
 
Inset a screw driver into th wards, and 
pull out the base. 
Disassembly of the base 
e base mounting hole, press it down
 
 

 
Connection and preparation of the
9 
 monitor 
 holes on the cover are clear of obstruction. 
e the LCD monitor near  a radiator or other powered devices. 
 
5.  Keep the mo ht, rain or 
moisture. 
St and the monitor on a stable surface. 
1.  Choose a position for the monito r that has good ventilation and make 
sure the ventilation
2.   Ensure the LCD monitor has 15cm of clearance on all sides to provide 
pr oper ventilation. 
3.  Do not plac
4.   Do not use open flames, such as candles, near the...

 
Connection and preparation o
10 
f the monitor 
 
ty and that of  the monitor, use only the specified 
 
ck. At least 6cm of clearance will be needed between  rt the 
 the ventilation slots 
herever the monitor is installed. 
 in a confined space. 
consumes a small amount of power in standby mode.   
ut it should be unplugged from the power  socket if it is not to be used for 
 
 
Installing the monitor on the wall 
The monitor conforms to the wall- mounted VESA standard. Please refer to
the...