AOC V27m Operation Instructions

							
 
 
 
 
 
 
 Operating Instructions 
 
V27m 
27” Multimedia Function Display 
 
 
 
						

							
 
2 nded that you read the contents of this manual carefully before 
ect to 
 
 
 
 
 
 
 
 
 
Thank you for choosing an AOC LCD Monitor. 
 
It is recomme
installing and turning on the monitor. Please keep this manual for future 
reference.  
 
N
ote: Our products are under continuous development and are subj
change without notice.   
 
*  The monitor may not be an exact match to the illustrations in this 
manual. But the monitor is the standard. 
 
 
						

							
 3 
Operating Instructions 
Con
Sou
Usin
Function settings .............................................................20  
 
Content 
Important safety notes ..............................................................5  
Read these notes before operating the device. .................5 
nection and preparation of the monitor ...............................7 
Parts list ........................................................................\
.....7  
Installation of the base .......................................................8  
Disassembly of the base ....................................................8  
Stand the monitor on a stable surface. ..............................9 
Installing the monitor on the wall .....................................10 
Power connection ............................................................10  
Turn
ing the LCD Monitor On or Off .........................................11 
Control Panel and Interface....................................................12  
Side panel ........................................................................\
12  
rce Interface .....................................................................13  
Video/S-Video Input: ........................................................14  
Auxiliary Component Input: ..............................................15  
HDMI Input: .....................................................................15  
PC Signal and PC Audio Input: ........................................16 
Earphone Jack: ................................................................16  
g the Menu .......................................................................17  
Source Menu ...................................................................17  
Video Settings .................................................................18  
Audio Settings (applicable to all modes) ..........................19 
 
						

							
 
Tips........................................................................\
.................21
4 
China RoHS Regulation Marking Requirements .....................27  Product Specifications ............................................................22 Supported Resolution.............................................................23 Troubleshooting......................................................................25   Glossary........................................................................\
.........26  
 
						

							
 
Important safety notes 
5 
before operating the device. 
 
ly and contact t he authorized distributor. 
 
anent 
 
ocket.  ched, particularly near the 
er, or supplied with . When a cart is used, use caution 
when moving the cart/apparat n to avoid the device being tipped 
over. 
Re ad these notes 
1.  Read these notes. 
2.
  Follow these notes. 
3.
 Heed all warnings. 
4.  Operate as per instructions. 
5.  Do not use this apparatus near water  (for example, near the bathtub, kitchen
si nk, washbasin, washing machine, in a humid basement, or near the swimming 
pool). If the unit is accidentally splashed, please disconnect the power plug 
immediate
6.
  Only use a dry cloth for cleaning. Always unplug the monitor power cable before cleaning. 
7.
  Do not allow any hard object to touc h the screen as this may cause perm
damage. 
8.
  Do not obstruct the v ents and install the device in accordance with the 
manufacturer’s instructions. 
9. 
Do not install the device  near heat sources such as electric heaters, radiators, 
ovens or any other heat source including amplifiers. 
10.  Always use a polarized plug, or a plug with a ground connection. Polarized plugs have one wide and one narrow flat pin. Grounded plugs have two flat pins and 
one  round grounding pin. The wider flat pin and round grounding pin are 
designed for safety. If the provided plug  does not fit your outlet socket, consult 
an electrician for a replacement of the obsolete s
11.
  Protect the power cord from being trodd en upon or pin
plu g and the point where it exits the apparatus. 
12.  Only use accessories specified by the manufacturer. 
13.  Use only with a cart, stand, tripod,  bracket, or table specified by the 
manufactur
 the apparatus
us combinatio
 
14.
  Use the correct power source as indica ted on the label. Consult the distributor or 
the local power company if you are not  sure about the power provided to your 
hom
e. 
15.  Unplug the monitor during thunderstorms or if it will not be used for a long time
. 
 
						

							
 
16.
6 
ing is 
ain or moisture, or it has been dropped.   
17.  Th r ental factors should be 
ta  i disposal or recycling 
in  Electronic Industries Alliance: 
w e
  All servicing must be carried out by pr ofessional service personnel. Servic
req
uired if the device does not work normally, or has been damaged in some 
way. For example, if the power cord has been damaged, if liquid has been 
spilled on it, it has been exposed to r
e p oduct may contain lead or mercury. Environm
ken nto account when you dispose these materials. For 
formation, contact the local authorit y or
ww. iae.org
. 
18.  D  under 
to recommended international 
standards in terms of casing design dime nsions and stability. Do not push the 
monitor on the front of the  casing or at the top, it may overturn and be damaged. 
Do not put electronic devices or toys on the casing, these may fall and be 
damaged, or cause personal injury. 
20.  Foreign articles and liquid:  Do not allow foreign articles or liquid to enter the 
casing through the ventilation slots. 
 
amage requiring servicing:  Consult a professional service technician
y of the following circumstances: 
an
A
.  The power cord or plug has been damaged. 
B.  Foreign objects or liquid have entered the monitor. 
C.  The monitor has been rained on. 
D.  Operation seems to be abnorma
l or  has changed significantly. 
E.  The monitor has been dropped or its casing has been damaged. 
.  Dimensions/stability: All monitors must conform 
19
 
						

							
 
Connect
7 
ion and preparation of the monitor 
Parts list 
 
  
AOC V27m Bracket Base + Screws 
    
 
Cleaning cloth  Power cord  VGA cable 
    
   
Warran  card Operating Instructions 
CD-ROM  Quick Installation Guide
ty
    
 
 
HDMI cable  Audio cable  Screws 
 
 
						

							
 
Connection and prep
8 
aration of the monitor 
e 
table. Tighten 
Installation of the bas
Take the monitor and the base out of the carton and assemble them, as 
shown in the figure below: 
1.
  Place the monitor face down on a soft cloth or pad on the 
the screws in the base to se cure the base and bracket. 
2.  Inset the base into the hole on the bottom of the monitor. 
 
Inset a screw driver into th wards, and 
pull out the base. 
Disassembly of the base 
e base mounting hole, press it down
 
 
						

							
 
Connection and preparation of the
9 
 monitor 
 holes on the cover are clear of obstruction. 
e the LCD monitor near  a radiator or other powered devices. 
 
5.  Keep the mo ht, rain or 
moisture. 
St and the monitor on a stable surface. 
1.  Choose a position for the monito r that has good ventilation and make 
sure the ventilation
2.   Ensure the LCD monitor has 15cm of clearance on all sides to provide 
pr oper ventilation. 
3.  Do not plac
4.   Do not use open flames, such as candles, near the monitor to prevent  accidents.
nitor away from high temperatures, direct sunlig
 
6.  To preven s shown 
below.  t the monitor from tipping ov er secure it to the table a
 
 
						

							
 
Connection and preparation o
10 
f the monitor 
 
ty and that of  the monitor, use only the specified 
 
ck. At least 6cm of clearance will be needed between  rt the 
 the ventilation slots 
herever the monitor is installed. 
 in a confined space. 
consumes a small amount of power in standby mode.   
ut it should be unplugged from the power  socket if it is not to be used for 
 
 
Installing the monitor on the wall 
The monitor conforms to the wall- mounted VESA standard. Please refer to
the instructions for product specifications and details. 
To ensure your own safe
wall-mounting bracket. Please note that wall mounting must be done by a
professional technician. 
When the monitor is mounted on a wall it must be possible to access the 
connectors at the ba
the monitor and the wall to ensure that there is enough space to inse
connection cables. 
It is important that air should flow freely through
w
Do not install the monitor
 
Power connection 
Insert one end of the power cord into the “Power Input” socket on the back 
and plug the other end into a 220V power socket. 
The monitor 
B
some time.