AOC Le24h060 User Manual

							 30
 
 
z  Restore Default:  To restore the factory default settings.  
z  Input Label:  To change the input source name.  
z   DCR:  To turn on/o ff the DCR (Dynamic Contrast Ratio 1 ,000,000:1) function.  
(Except USB source.)  
z  Over Scan:  To select this function to On or Off in HDMI1 and HDMI2 (Only available when 
input signal is in video timing. Ex:480i, 480p, 720p,1080i, 1080p)  
z  Media:  To set the picture slide show setting.(Only available in USB source.(See\
 page 39))  
English
 
						

							 31
LOCK Menu 
—To set up parental control 
It is active in all input sources:
 
 
 
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, 
HDMI2, PC and USB sources.  
 
z  Enter Password:  Enter password and the screen below will show. (The default password is 
0000.) 
  
Note: Some options will be disabled when in YPbPr,  HDMI1, HDMI2, PC and USB
 source. 
 
z  Change Password:  To change the password, press  ►, and the screen on the right appears. 
Follow the instructions to change password. 
z  System Lock:  Select “On” to enable the following options. 
Note: The below options can be enabled only when “On” is selected here. 
z  Unrated Lock:  Select “On” to block unrated movies or TV programs. (Only active in TV, AV, 
S-Video sources) 
z  Input Block:  To set the input source to be blocked. 
English
 
						

							 32
z US:  Press  ► to set TV or MPAA ratings. (Only active in TV, AV, S-Video sources) 
 
 

						

							 33

						

							 34

						

							 35
CHANNEL Menu 
—To set up for TV 
Note: The Channel Menu is only active in TV source. When in AV, S-Video, YPbPr, HDMI1, HDMI2, 
PC and USB source, the CHANNEL Menu will not appear. 
 
 
Note: The condition of DTV Signal will only be displayed when source is in DTV\
. 
 
z  TV Source:  To select Cable or Air as the TV source.   
z  Auto Scan:  To auto scan the TV or DTV channels. Select Air or Cable in TV Source option, 
and press  ► to start auto scanning TV channels. Press  MENU again at any time to interrupt   
scanning. 
  
English
 
						

							 36
z Favorite:  To set your favorite channels into memory. Press  ENTER to confirm / cancel your 
favorite channels. Press ◄► to go to previous / next page.   
  
 
z  Show/Hide:  Press ENTER  to skip the selected channel. To restore the channel, press  ENTER 
again. 
 
 
z  Channel No.:  Press ◄► to select a channel. The channel selected will be shown on the 
screen at the same time. 
 
English
 
						

							 37
z Channel Label:  Press ► to edit a name for the current channel (the channel selected in 
Channel No.). Use  ▲▼ to choose letters or signs,  ◄► to move forward or backward, and 
then press  MENU or ENTER  to exit. 
 
  
 
z  DTV Signal:  To display the detected signal strength of the current DTV channel.   
English
 
						

							 38
USB Source 
—To display the USB picture 
(only supports JPEG, BMP and PNG image files) 
 
1. When input source is selected to USB, insert the USB device into the \
USB jack.   
USB only supports JPEG, BMP and PNG image files (With
symbol). 
2. Use  ▲ or  ▼ to select the folder you want, and press  ENTER.
 
 
3. Return to main menu, press  ▲ or  ▼ to ”--“ and press  ENTER.  
Use  ▲ or  ▼ to select the image files you want, and press  ENTER.
 
  
 
In USB mode, you can use the buttons to make following functions: 
Press INFO can view all of the functions. 
 
English
 
						

							 39

NPress  EXIT go back to the previous page. 

N Use  ► or  ◄ to display the next or previous picture.
 

N Use  ▲ or  ▼ to rotate right or rotate left the picture.(Only available in X1.0 mode) 

N Press  ZOOM  to zoom in. (X1.5~X4.0) 

N When the Zoom mode, press  ▲▼◄► to move. 

N Press  ENTER  to auto-play or stop the pictures.
 
 
In “Option” menu can setup following functions: 
  
Note:  The Media function is only active in USB source.  When in TV, AV, S-Video, YPbPr, HDMI1, 
HDMI2, and PC source, the Media function will not appear. 
 
1. Press the  MENU button to display the OSD main menu. 
2. Press  ◄ or  ► to select “Option” menu, then press  ENTER or ▼ to enter the menu.   
Press  ▲ or ▼ to select “Media”, and use  ► to enter “Media” setting. 
 
z  SlideShow Timer:  To select the pictures auto-play interval time. 
z  Trans. Effect:  To select the auto-play effects of the slide show. 
z  File List Sorting:  To select the pictures arrange. 
z  SlideShow Repeat:  To select the slide show repeat to On or Off. 
English