AOC Le24h060 User Manual

							 20
BASIC OPERATION 
To operate your  LED-LCD T V, you may use the  TV remote control or side  panel buttons to select 
input  source, change channels, or adjust volume. 
 
T urning on the  LED-LCD TV 
Before using the  LED-LCD T V : 
1.  Connect external equipment properly. 
2.  Insert the power plug and the power LED indicator w ill light orange. 
 
Power On/Off 
T o turn the  LED-LCD TV on/o ff: 
Press  POWER  button on the right side of  LED-LCD TV or press  POWER button on your remote control 
to turn on/o ff the  T V. The power LED indicator ligh ts blue when the  LED-LCD TV is on, and ligh ts 
orange when TV is off. 
Note:  When there is no signal in the PC mode, the power LED indicator lights orange after a few seconds’ 
idleness. 
 
Initial Setup 
When the TV is initially powered on, basic  settings proceed automatically and subsequently: 
(Setup Wizard only appears when first turning the TV on and without channel scanning.) 
 
 
 
 
  2. 
Press  ◄ or  ► to select OSD language, 
then press  ENTER, ◄  or  ► to confirm the 
selection, and press  ENTER once more to 
go to next step. To change the selection, 
press  ▲ or  ▼. To return to the previous 
page, press  MENU.
 
3.   Select Time Zone of your location. To press 
▼  to setup DST (Daylight Saving Time) and 
select On or Off with  ◄ or  ►, according to 
the time zone of your area. To press  ▼ to 
setup Time Format, and select 12-hour or 
24-hour with  ◄ or  ►, then press  ENTER to 
continue.  
1. Press the 
POWER button on the remote 
control. The Setup Wizard window will be 
display.
 
English
 
						

							 21
 
 
 
 
Select input source 
To select the required input source: 
Press the  INPUT button on the remote control, Use  ▲▼ to select the required input source 
between TV, AV, S-Video, YPbPr, HDMI1, HDMI2, PC and USB. 
To confirm the selection, press  ENTER.
 
 
 
 
Volume Adjusting 
Press  + VOL–  to adjust volume.   
To turn off the volume, press  MUTE. 
If you want to restore volume, press  MUTE again, or press  + VOL– directly.
 
 
5.   The Initial Setup will be completed after  Cannel scanning is finished. To interrupt the 
scanning, press  MENU at any time.
 
4.   Select TV Source from Air or Cable, then 
press  ENTER  to continue.  
English
 
						

							 22
INFO 
To display the current information of the  LED-LCD T V : Press  INF O, and the current s tate will be 
displayed  on the screen. (It shows all or some of the information about Input, Ch\
annel, Resolution,
Audio Type,  etc., depending on what input source it is in.) 
 
* The picture here shows an example of the INFO screen in a DTV source. 
 
Electronic Program Guide (EPG) 
Press the  GUIDE button on the remote control and the program information for the channe\
l you 
are watching will be displayed on the screen. This function is only available when in DTV source. 
 
* The picture here shows an example of the GUIDE screen in a DTV source. 
 
Channel Select 
Press number key or  ▼CH ▲ button to select your desired channel. 
1. ATV  The “ -” button has no function in ATV mode. Directly press the number buttons to select 
channels. 
2. DTV  Use “-＂ button to select the sub channel in DTV. 
Ex: Your desired number is 80-3. 
Press  8 →  press  0 →  press “-＂→  press  3. 
• Whether in ATV or DTV, after you input the channel numbers, press  ENTER button to direct 
to the channel immediately, or wait for 3 seconds to change automatically.   
• Return to the previous channel, press  RETURN button. 
 
English
 
						

							 23
List 
Press LIST button and there will be a small window showing program list, you can scroll through 
the list to select the channel you want directly without using the  ▼▲ button. 
 
 
Favorite Channels 
Press  FAV button to show Favorite List and select your favorite channels that hav\
e already been 
stored. (You need to preset the favorite channels from the OSD menu to enable this\
 function.)
 
 
 
Sleep Time Setting 
Repeatedly press  SLEEP button to set the off timer. The function is used to automatically shut off 
the  LED- LCD TV a fter a preset period of time  pa ssed.  There are several times for choice – O ff, 5min, 
10min, 15min, 30min, 45min, 60min , 90min, 120min, 180min, 240min. 
 
Zoom 
Press  ZOOM  button repeatedly to select the screen size. You can select from Normal, Movie Scale, 
Zoom In, and 4:3. 
  Normal:  Suitable for stretching 4:3 programs to fill the screen.   
 Movie Scale:  This mode is useful for 1.78:1 DVDs, When viewing 1.85:1 DVDs 
movie scale mode will still show very thin black bands at the top and bo\
ttom of the screen.   
English
 
						

							 24
 Zoom In: Suitable for viewing wide-screen 2.35:1 anamorphic DVDs in full screen. 
 4:3:  Suitable for viewing conventional 4:3 programs in their normal format. 
 
MTS Selecting 
Press  MTS button to choose the available sound output that is preset by TV broadcasting station. 
 
C.C Mode 
Press  C.C button to select the caption mode. 
 
Using the OSD function 
You can use the OSD menus and options to adjust various settings by using\
 the remote control. 
The basic operation is as following: 

						

							 25
ADVANCED OPERATION—OSD MENU 
 
PICTURE Menu 
—To adjust the picture quality 
In TV, AV, S-Video, YPbPr, HDMI1, HDMI2 source:
 
 
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, 
HDMI2, PC and USB sources. 
 
In PC source:  In USB source: 
      
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, HDMI2, 
PC and USB sources.
 
z 
Picture Mode:  To select picture mode between Standard, Dynamic, Soft, and Personal. 
z Contrast:  To adjust contrast of video. (right: Max, left: Min.) 
z  Brightness:  To adjust luminance of video. (right: Max, left: Min.) 
z  Sharpness:  To adjust picture sharpness. (right: sharper, left: softer.) 
z  Tint:  To adjust tint level. (Except PC source) 
z  Color:  To adjust color. (right: brilliant color, left: pale color.) (Except PC source) 
z  Color Mode:  To select color mode from Normal, Warm, Cold or Personal. (Except USB 
source) 
English
 
						

							 26
z Zoom Mode:  To select image size from Normal, Movie Scale, Zoom In or 4:3. (Except PC\
 and 
USB source) 
z  Noise  Reduction:  To select noise restriction function from Middle, Strong, Off, or Weak. 
(Except PC and USB source) 
z  Advanced:  To adjust advanced PC functions, press  ► to enter. (only appear in PC source) 
 

						

							 27
In AV, S-Video, YPbPr, HDMI1, HDMI2, PC source: 
 
 
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, 
HDMI2, PC and USB sources.
 
 
z  Sound Mode:  To select sound mode between Standard, Music, Movie, Sports, and Personal. 
z  Bass:  To adjust bass. 
z  Treble:  To adjust the treble. 
z  Balance : To adjust left and right audio balance. 
z  Audio Language:  To select the available audio languages. (only enabled in DTV mode) 
z  MTS:  Press  ◄► to select the audio language from STEREO, SAP or Mono. (only appears in 
ATV mode) 
z  SRS TruSurround HD:  To enjoy a concert hall effect, select “On” when stereo is playing. 
SRS TruSurround HD™  creates an immersive, feature-rich surround sound experience from 
two speakers, complete with rich bass, high frequency detail and clear dialog. 
z  Audio Only:  To turn off the screen picture but keep the sound on. 
 
  TruSurround HD
, SRS and the
  son marcas comerciales de SRS Labs, Inc.   
TruSurround HD  technology is incorporated under license from SRS Labs, Inc.  
 
English
 
						

							 28
TIME Menu 
—To set up time zone 
It is active in all input source:
 
 
 
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, 
HDMI2, PC and USB sources. 
 
z  Sleep Timer:  Off, 5min, 10min, 15min, 30min, 45min , 60min, 90min, 120min, 180min, 240min. 
z  Time Zone:  To select the correct Time Zone for your area. 
z  DST:  To turn on/off summer Daylight Saving Time. 
z  Time Format:  To select time format from 12-hour or 24-hour. 
z  Auto Sync:  To enable automatic synchronization of time. 
z  Clock:  Only  when Auto Sync is off, the current time is adjustable. Press  ► to enter. Use  ◄► 
to move between Year, Month, Date, Hour, Minute, and use  ▲▼ to adjust. Select  OK and 
press  ENTER  to save the setting. 
 
 
OPTION Menu 
—To set up OSD window 
In TV, AV, S-Video source:  In YPbPr, PC source: 
    
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, 
HDMI2, PC and USB sources.
 
English
 
						

							 29
In HDMI1, HDMI2 source:  In USB source: 
     
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, 
HDMI2, PC and USB sources. 
 
z Menu Language:  To select an OSD language from English, French or Spanish. 
z  Transparency:  To change the transparency of OSD window. (0%, 25%, 50%, 75%, 100%) 
z  OSD Time Out:  To setup the display time of OSD. (5, 15, 30, 45, and 60 seconds) 
z  Closed Caption:  To set close caption options.(Only available in TV, AV, S-Video source.)