Anthem Ltx-500 Lcos Projector Instructions

 
 
ENGLISH
41
Getting StartedPreparationBasic OperationTroubleshooting
SettingsOthers
Function > Off Timer
36
Off Timer
Automatically powers off when there is no operation for a certain duration.
OffDisables the off timer.
1 hourAuto power off after 1 hour.
2 hoursAuto power off after 2 hours.
3 hoursAuto power off after 3 hours.
4 hoursAuto power off after 4 hours.
Function > High Altitude Mode
37 High Altitude Mode
Selects this when using the projector in a location of low atmospheric pressure (higher...

Settings
42
  Customizing Projected Images
You can adjust the projected image to a desired image quality and register the adjusted value. (Picture 
Mode) Besides the fi ve default lCinema 1z, lCinema 2z, lNaturalz, lStagez, lDynamicz and lTHXz
settings, 
there are 3 more types of user-defi ned settings for Picture Mode.
Changing the Initial Setting of
  Picture Mode
lContrastz, lBrightnessz, lColorz, lTintz, lColor Temp.z, lGammaz, lSharpnessz, 
lNRz, lCTIz and lLens aperturez are registered in the...

 
 
ENGLISH
43
Getting StartedPreparationBasic OperationTroubleshooting
SettingsOthers
 Registering User-defi ned Picture Mode
1








Select the picture mode




2

Adjust picture quality









● See lChanging the initial setting of picture Modez
for procedures 
                on adjusting the picture quality.
(
P42)
3

To end
 Registering User-defi ned Picture Mode
from the Menu
1

Adjust picture quality
● See lChanging the Initial Setting of Picture Modez
for procedures 
    on adjusting the...

Troubleshooting
44
  Troubleshooting
■ You do not need to worry about the following situations if there is no abnormality on the screen.


● Part of the top surface or front of the unit is hot.
     
● A creaking sound is heard from the unit.
   
 ● An operating sound is heard from the inside of the unit.
     
● Color smear occurs on some screens.
Power is not supplied
Is the power cord disconnected?Insert the power cord (plug) fi rmly.P26
Is the lamp cover properly shut?Remove the power plug when the...

 
 
ENGLISH
45
Getting StartedPreparationBasic OperationTroubleshooting
Settings
Others
The image cannot output by HDMI terminal
Is the setup of “Control with HDMIz 
function 
“Off”?Set up the “Control with HDMI
z function to 
lOff
z.P35 - 11
● Even if the “Control with HDMI
z function is “On”, there are still some devices cannot reveal image normally.
Color does not appear or looks strange
Is the image correctly adjusted?Adjust 
lColor
z and 
lTint
z in the setting menu.P31 - 04 05
Video image is fuzzy...

Troubleshooting
46
  What to Do When these Messages 
Are Displayed
Message Cause (Details)
No device is connected to the input terminal.
The input terminal is connected but there is no signal.
     Input the video signals.
A video signal that cannot be used in this unit has been input.
     Input video signals that can be used.
* The names of input terminals such as COMP. will be displayed in yellow.
This message is displayed when the accumulated lamp time has 
exceeded 1900 hours.
To clear the message,...

 
 
ENGLISH
47
Getting StartedPreparationBasic OperationTroubleshooting
Settings
Others
  About Warning Indicators
The accumulated lamp time or warning mode of this unit is displayed by the indicators.
For information on indicator display during normal operation, see 
lControls and Features
z.

(
P14)
No.Indicator
Blinking
TimeBlinking
FrequencyInterval 
between 
BlinksContentWARNING LAMP STANDBY
ON
1--Light on (Red)-- -During standby
Indicator 
display 
in normal 
conditions. 2
--Light on 
(Green)--...

Troubleshooting
48
  Replacing the Lamp
The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit.
● When the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the 
      indicator.  (
P47)


Remove the lamp cover
   ● Remove the screws with a  screwdriver.
Usable Lamp Life
● The usable lamp life for this unit is 
     approximately  2000  hours.  The
    usable lamp life of 2000 hours is 
    merely the...

 
 
ENGLISH
49
Getting StartedPreparationBasic OperationTroubleshooting
Settings
Others
Install the new lamp unitCAUTION
● Use only genuine replacement parts  
       for  the  lamp  unit. Also,  never  attempt 
      to  reuse  an  old  lamp  unit.  This  may 
      cause  a  malfunction.
● Do not touch the surface of a new lamp. 
      This may shorten the lamp life  and 
      cause lamp blowout.
Tighten the screws of the new 
lamp unit
● Tighten the screws with a  screwdriver.
● Do not place the...

Troubleshooting
50
Replacing the Lamp (Continued)
BACK TEST
HIDE BRIGHT
CONTSHARP COLORTINT
N.R GAMMA
C.TEMP INFO
LENS.APASPECT
LENS
INPUT STANDBY
ON
MENU
CINEMA1CINEMA2
NATURALSTAGEDYNAMIC
USER1USER2USER3
LIGHT
Resetting Lamp Time
W  ARNING
LAMP
ST ANDBY/ON
● Reset the lamp time only when you 
      have  replaced  the  lamp.
● Never reset the service time when
      the lamp is still in use. Otherwise, 
      the  approximate  standard  for  gauging 
      replacement  time  may  be  inaccurate...