Anthem Ltx-500 Lcos Projector Instructions

 
 
ENGLISH
31
Getting StartedPreparationBasic OperationTroubleshooting
SettingsOthers
Setting Menu
Item values shown in  are factory settings.
● Items that can be confi gured differ according to the input signals.
Picture Adjust 
01 Picture Mode
Adjusts the pattern of the projected image.
Cinema1, Cinema2, Natural, Stage, Dynamic, User1, User2, User3 and THX.
02 Contrast
Adjusts the contrast of the projected image.
(Black) –50 to 50 (White)
03 Brightness
Adjusts the brightness of the projected image....

Settings
32
Setting Menu (Continued)
Picture Adjust > Color Temp.
06 Color Temp.
Sets the color temperature of the projected image. (Cannot set when the “Picture Mode” in “THX”.)
5800KSelect this to give a reddish tinge to the 
image.
Only offset can be set. 6500KSelect this to have a balanced image.
7500KSelect this to give a bluish tinge to the 
image.
9300KSelect this to give a greater bluish tinge 
than 7500K.
High BrightSelect this to get the brightest image.
Custom 1Gain
(Bright part)Red(Less red)...

 
 
ENGLISH
33
Getting StartedPreparationBasic OperationTroubleshooting
SettingsOthers
Picture Adjust > Gamma
07 Gamma
Sets the gradation characteristics of the projected image. (Cannot set when the 
lPicture Mode” in 
lTHX
z.) 
NormalFor normal circumstances, select this
setting.
Gamma adjustment cannot be performed, 
and only copy is valid. ASet gamma to 
lA
z.
BSet gamma to 
lB
z.
CSet gamma to 
lC
z.
Custom 1
Custom 2
Custom 3
(Gamma Setup)Three different kinds of gamma can be set according to your...

Settings
34
Setting Menu (Continued)
Picture Adjust 
08 Advanced
Adjusts the contours of the image, detailed composition of the image and image color. (Cannot set when the “Picture Mode” 
in “THX”.)
SharpnessSharpness(Soft) 0

to

100 (Sharp) Adjusts the outline of image.
Detail 
Enhancement(Soft) –50

to

50 (Strong) Emphasizes the details of image.
NR*RNR(Soft) 0

to

16 (Strong)Adjusts the intensity of removing 
image noise.
MNR(Soft) 0

to

16 (Strong)Adjusts the intensity of removing 
mosquito...

 
 
ENGLISH
35
Getting StartedPreparationBasic OperationTroubleshooting
SettingsOthers
 
 4 Select the 
lHue
z, 
lSaturation
z or 
lBrightness
z using the  /  button.
5 Use the   /  button to adjust.
             
● You can switch between lBeforez and lAfterz using the [TEST] button of the remote control.
6 To end
Input Signal > HDMI
11 HDMI
Confi gures HDMI input signal.
InputAutoAutomatically confi gures the input signals.
StandardSelect this when the dynamic range of the input images is 
16-235....

Settings
36
Setting Menu (Continued)
Input Signal > Video/S-Video
13
Video/S-Video
Confi gures the Video/S-Video input signals.
NTSC Setup Level0IREAdjusts the gradation for signals without the 7.5 IRE setup.
7.5IREAdjusts the gradation for signals with the 7.5 IRE setup.
● Adjust this only when NTSC signals are input via Video or S-Video terminal.
Color SystemAutoConfi gures the color system automatically.
NTSCSelect this when the color system is NTSC.
NTSC4.43Select this when the color system is...

 
 
ENGLISH
37
Getting StartedPreparationBasic OperationTroubleshooting
SettingsOthers
Input Signal > Aspect (Computer)
17
Aspect (Computer)
Confi gures the screen size of the projected image.
AutoEnlarges the PC signal horizontally/vertically until it fi ts the panel height, and displays 
it in the original aspect ratio.
1:1Displays the PC signal corresponding to the panel at one dot per pixel ratio. The PC 
screen can be shown in the original size.
FullEnlarges the PC signal horizontally/vertically.
●...

Settings
38
Setting Menu (Continued)
Installation > Lens Control
22
Lens Control
Controls the individual motorized function of the lens when setting up the projector
FocusFunction for adjusting the lens focus.
ZoomFunction for adjusting the lens zoom.
ShiftFunction for adjusting lens shift. (Press the up/down/left/right button to shift the screen).
Image Pattern
OnDisplays the image pattern in conjunction with the above setting items.
    Display Display for 
lFocus
z:
    for 
lZoom
z and 
lShift
z:...

 
 
ENGLISH
39
Getting StartedPreparationBasic OperationTroubleshooting
SettingsOthers
Display Setup > Back Color
26
Back Color
Confi gures the screen color displayed when there is no input signal.
BlueSets screen color to “Blue” .
BlackSets screen color to “Black” .
Display Setup > Menu Position
27
Menu Position
Sets the display position of the menu. The possible positions for displaying the menu are at the four corners or at center of 
the screen.
Display SetupBack Color
Menu Position
Menu Display
Exit...

Settings
40
Setting Menu (Continued)
Display Setup > Language
32
Language
Sets the language of the menu display.
°=Japanese
EnglishEnglish
DeutschGerman
EspañolSpanish
ItalianoItalian
FrançaisFrench
PortuguêsPortuguese
NederlandsDutch
SvenskaSwedish
NorskNorwegian
РусскийRussian
ÏÓChinese 
Function > Lamp Power
33
Lamp Power
Confi gures the output of the light-source lamp.
NormalFor normal circumstances, select this setting. (150W)
HighSelect this when it is diffi cult to see the image in a bright...