Anschutz 2007, 2013 Instruction Manual

26i r
etuo
pa sd f
The sear engagement is too long:
There  is  a  small  distance  between  the
second stage and the release of the trigger.
•Turn  set  screw  No.  5  clockwise  after
cocking  and  releasing  (approximately
1/8 turn each).
•Repeat this process until you do not feel
the  second  stage  anymore.  Then  turn
1/5 turn back to the left. Thus the optimum
sear engagement is adjusted.
The sear engagement is too short:
There  is  no  second  stage.  The  trigger
releases undefined without second...

27
Attention:
The  trigger  stop  set  screw  No.  8  can  be
turned over the second stage or first stage
function. Malfunction (the trigger does not
release)!
6. Adjustment of the trigger blade:
•Loosen hex screw No. 7
•Trigger blade No. 6 can be moved in the
longitudinal  guide  and  can  be  tilted
laterally.
7.  Change  of  two-stage  trigger  into
single stage trigger:
Adjusting process:
•Turn first stage weight screw No. 4 clock-
wise until you have reached the maximum
first stage.
•Cock the...

28i r
etuo
pa sd f
•The  trigger  stop  set  screw  No.  8  is
screwed in too much. Turn it a few turns
to the left until the cocking piston or firing
pin will release again.
The trigger does not catch the cocking
piston or firing pin:
•Set screw No. 4 (first stage) is screwed in
too much.
•Check  to  see  if  the  spring  is  correctly
attached and not defective.
The  first  stage  trigger  is  adjusted  too
tightly:
•Turn set screw No. 5 stepwise 
1/4  turn to
the right until the firing pin is caught....

29
When you order trigger parts
please indicate the order
number, type of rifle model
together with the trigger model
number. For left hand versions
please add ”L”
For small bore
models
production  yearsFor small bore
models  serial-no.
starting  from
1607, 1613, 1608 EDS
Order No.
Two-stage
trigger
Single-stage
trigger
Adjusted to
Right hand
version
Left hand
version
For models
1407, 1407 Z, 1409, 1411
1413, 1408 EDS1959 - 1974
1807, 1907, 1807 Z, 1907 Z
1907 Silh., 1807 Rep.
1907 Rep., 1907 Rep., 1912...

30
Dry firing device
The length of the spring-supported firing pin
is  adjusted  so  that  it  definitely  ignites  the
cartridges.  If  there  is  no  cartridge  or
cartridge case in the chamber, the firing pin
as well as the rim of the chamber may be
damaged  when  dryfiring  for  a  longer
period.  In  order  to  prevent  any  possible
damage use either a cartridge case (after
about  5  practice  shots  insert  a  different
case)  or  preferably  the  training  firing  pin
1807T-12.  With  this...

31
they may have a detrimental influence on
the performance of your rifle.
•Loosen the clamping screws.
•Pull off the muzzle tube in the direction of
shooting. Once removed the muzzle tube
has to be cleaned  with cleaning device
4422/1  (Order  No.  710.6350).  Any
residue must then be removed.
•Carefully clean the muzzle with a slightly
oiled lint-free cloth.
•Following  this  the  tube  is  refixed  to  the
barrel  so  that  the  groove  in  the  tube  is
coupled with the fixing pin on the barrel.
•...

32
Warranty
A warranty of 1 year will be issued. Parts
which  are  subjected  to  wear  are  not  part
of this warranty. In the case of warranty we
substitute the defective parts free of charge.
Cases of warranty will only be accepted if
the  article  in  question  and  the  corres-
ponding  purchase  receipt  plus  filled-in
warranty card are presented. Warranty will
not be accepted if changes or repair works
have been carried out by persons who are
not  authorised,  if  the  rifle  is  not  used...

Originalschussbild Ihres Gewehres 10 Schuss auf 50 m
Original group of your rifle 10 shots at 50 m Fabr.-Nr.:
Serial No.:..........................................................................
Bitte hier eintragen · Please fill in here
J.G. ANSCHÜTZ GmbH & Co. KG
Jagd- und Sportwaffenfabrik
Daimlerstrasse 12
D-89079 Ulm / GERMANY
Postfach 11 28
D-89001 Ulm / GERMANY
Telefon (++49)-(0)-731-4012-0
Telefax (++49)-(0)-731-4012-700
anschuetz-sport.com
[email protected]
DGG · 11/01/1.000