Anschutz 1700 Instruction Manual

44
6. Adjustment of the trigger blade
¥Loosen hex screw No. 7
¥Trigger blade No. 6 can be moved in the
longitudinal guide and can be tilted
laterally.
7. Change of two-stage trigger into
single stage trigger
Adjusting process:
¥Turn first stage weight screw No. 4
counter-clockwise until you have reached
the maximum first stage.
¥Cock the rifle.
¥Turn set screw No. 5 (first stage) counter-
clockwise until the trigger releases.
¥Turn set screw No. 5 from this position
approx. 
1/4 turn clockwise.
The...

45
The trigger catches the  firing pin, but the
trigger does not release:
¥Make sure that the safety of the trigger is
released.
¥Check if there is a trigger cam and that it
is attached correctly.
¥The trigger stop set screw No. 8 is
screwed in too much. Turn it a few turns
to the left  (counter-clockwise) until the
cocking piston or firing pin will release
again.
The trigger does not catch the cocking
piston or firing pin:
¥Set screw No. 4 (first stage) is screwed in
too much.
¥Check to see if the...

46 

47
Sight Set
Folding rear sight and tangent rear
sight
1. Elevation of folding rear sight:
¥Loosen slightly both screws at the rear
sight
¥Shots are too low:
Raise the slide
¥The shots are too high:
Lower the slide
2. Elevation of tangent rear sight:
¥Shots are too low:
Raise rear sight elevator
¥The shots are too high:
Lower rear sight elevator
3. Windage of folding and tangent
rear sight
To adjust windage to left or right tap the base
of the rear sight in the opposite direction of
the desired change of...

48
Warranty
A warranty of 2 years will be issued. Parts
which are subjected to wear are not part
of this warranty. In the case of warranty we
substitute the defective parts free of charge.
Cases of warranty will only be accepted if
the article in question and the corres-
ponding purchase receipt plus filled-in
warranty card are presented. Warranty will
not be accepted if changes or repair works
have been carried out by persons who are
not authorized, if the ANSCH†TZ product
is not used correctly, if...

49
FABRIKATIONS-NR.:
Serial-No. / NumŽro de sŽrie:
DATUM DES VERKAUFS:
Date / Date dÔachat:
GEKAUFT BEI:
This item was bought from / DŽtaillant:
Stempel und Unterschrift des FachhŠndlers
stamp of dealer / timbre du dŽtaillant
$
Dieser Artikel wurde zum Verkauf freigegeben, nachdem er
selbst, seine Materialien und Einzelteile strenge Kontrollen
durchlaufen haben, oder das Gewehr beim Beschuss seine
Haltbarkeit und Funktion unter Beweis gestellt hat. Wir Ÿber-
nehmen fŸr zwei Jahre volle Garantie auf...

50$



de bon fonctionnement au banc dÔŽpreuve. Nous la garan-

vice de fabrication (sauf contre les bris de crosse ou de

Žxistait dŽjˆ au moment de lÔachat de lÔarticle. Nous ne
rŽpondons pas des dŽfauts rŽsultant dÔune utilisation
incorrecte ou de rŽparations. Nous nous rŽservons dÔexŽ-
cuter la garantie soit par remise en Žtat soit par Žchange.

le que soit la cause mise en avant. Veuillez faire remplir
et signer cette carte par votre armurier et nous lÔadresser
avec lÔarticle.J.G. ANSCH†TZ GmbH &...

51
Serial-No.
Date / Date dÔachat:
This rifle was bought from:
Stamp of dealer
$
After throrough testing of materials and finished parts this
item has passed a rigid final inspection as well as proof
testing or test shooting. If, despite these precautions, there
is any failure due to defective materials or workmanship
(except brocken stocks and springs) within two years the
necessary repairs will be carried out without charge, in so
far as the item was evidently defective at the time of
purchase. No...

52$
Factory Service & Repair Centers USA
Congratulations on the purchase of one of the worldÔs greatest pistols. To obtain service or
repair for your ANSCH†TZ product send the gun together with the filled-in warranty card
freight prepaid to the National Service Center for ANSCH†TZ at the following address:
Gunsmithing, Inc. J.G.ANSCH†TZ GmbH & Co.Kg
30 West Buchanan StreetJagd- und Sportwaffenfabrik
Colorado Springs, CO 80907
P.O. Box 1128
Phone (719) 632-3795
D-89001 Ulm/Germany
Fax (719) 632-3493 Phone...

53
We are proud to be a member of: