Analog Devices ICE1000ICE2000 Emulator Users Guide Rev 12

ICE-1000/ICE-2000 Emulator User’s Guide xi Preface
Also note, 
myAnalog is a free feature of the Analog Devices Web site that 
allows customization of a Web page to display only the latest information 
about products you are interested in. You can choose to receive weekly 
e-mail notifications containing updates to the Web pages that meet your 
interests, including documentation errata against all manuals.
myAnalog provides access to books, application notes, data sheets, code 
examples, and more.
Visit...

Notation Conventions
xii ICE-1000/ICE-2000 Emulator User’s Guide
Notation Conventions
Text conventions used in this manual are identified and described as 
follows. 
Example Description
File > CloseTitles in bold style reference sections indicate the location of an item 
within the CrossCore Embedded Studio’s menu system (for example, 
the Close command appears on the File menu).
{this | that}Alternative required items in syntax descriptions appear within curly 
brackets and separated by vertical bars;...

ICE-1000/ICE-2000 Emulator User’s Guide 1-1 
1 GETTING STARTED
This chapter provides the information needed to begin using Analog 
Devices emulators. 
Analog Devices emulators are not intended to be used in a 
production environment. 
This chapter includes the following sections.
Contents of Emulator Package
Provides a list of components shipped with the emulator.
PC Configuration
Describes the minimal PC requirements.
Emulator Installation Tasks
Provides a step-by-step procedure for setting up the...

Contents of Emulator Package
1-2 ICE-1000/ICE-2000 Emulator User’s Guide
Contents of Emulator Package
The ICE-1000 emulator package contains the following items:
 ICE-1000 emulator
 2-meter USB standard-A to mini-B cable 
The ICE-2000 emulator package contains the following items:
 ICE-2000 emulator with enclosure
 6-inch 0.05 cable assembly
 10-pin to 14-pin adapter used for connecting to the legacy 0.1 
14-pin JTAG header
 2-meter USB standard-A to mini-B cable 
PC Configuration
For correct operation...

ICE-1000/ICE-2000 Emulator User’s Guide 1-3 Getting Started
Emulator Installation Tasks
Perform the following tasks to install your emulator safely. Follow the 
instructions in presented order to ensure correct operation of your soft-
ware and hardware. 
1.Installing the Emulator Software
2.Configuring Operating Voltage of the JTAG/SWD Interface on an 
ICE-1000
3.Configuring Operating Voltage of the JTAG/SWD Interface on an 
ICE-2000
4.Verifying Driver Installation and Attaching to an Emulation 
Target...

Emulator Installation Tasks
1-4 ICE-1000/ICE-2000 Emulator User’s Guide
Configuring Operating Voltage of the JTAG/SWD 
Interface on an ICE-1000
Determine the operating voltage of the JTAG/SWD interface of the target 
processor. The ICE-1000 emulator ships configured for connecting to a 
3.3V target. The jumpers are installed on positions 1 and 3, and 2 and 4 
(default) of 
JP1. Refer to Table 1-1 and Figure 1-1 for configuring other 
voltages. 
Table 1-1. Operating Voltage
Target Voltage JP1 Settings...

ICE-1000/ICE-2000 Emulator User’s Guide 1-5 Getting Started
Configuring Operating Voltage of the JTAG/SWD 
Interface on an ICE-2000
Determine the operating voltage of the JTAG/SWD interface of the target 
processor. On the ICE-2000 emulator, the voltage is configured when 
making a platform using the configurator. The default voltage is 3.3V. 
Refer to the online help for information about “target configurator”.
Before connecting to a target, see the power-up/down procedures 
in Applying Power to the...

Emulator Installation Tasks
1-6 ICE-1000/ICE-2000 Emulator User’s GuideWhen connecting to a 14-pin header on a target board, connect to 
either the 6 cable along with the supplied adapter board when 
using the ICE-2000 or to the (
J1) connector (located at the end) 
when using the ICE-1000. Figure 1-2. Verifying Driver Installation
Figure 1-3. J2 Pinout
1
3
5
2
4
6TMS/SWDIO
GND
7
9
8
10TCK/SWDCLK
TDO/SWO
TDI
TARGET_RESET GNDPD
EMU
TRST 

ICE-1000/ICE-2000 Emulator User’s Guide 1-7 Getting Started
The 14-pin connector is keyed at pin 3 on the emulator connector 
to ensure that the signals mate correctly with the 14-pin target 
emulation header. The target board should also have pin 3 of the 
JTAG interface connector cut. Refer to Figure 1-4 for 
J1 and 
adapter board pinout information.
Applying Power to the Emulator
To power up the emulator:
1. Apply power to the target board.
2. Connect the USB cable between the emulator and the PC.
The...

Configurator Software
1-8 ICE-1000/ICE-2000 Emulator User’s GuideTo power down the emulator:
1. Shut down (exit) CrossCore Embedded Studio or VisualDSP++.
2. Disconnect the USB cable between the emulator and the PC.
3. Power down the target board.
4. The emulator can now be removed from the target.
For custom processor boards still in design, refer to an Engineer-to-Engi-
neer Note, “Analog Devices JTAG/SWD Emulation Technical Reference 
(EE-68)”, available from the Analog Devices Web site. This document...