Analog Devices ICE1000ICE2000 Emulator Users Guide Rev 12

a
 ICE-1000/ICE-2000 Emulator
User’s Guide
Revision 1.2, April 2015
Part Number
82-000617-01
Analog Devices, Inc.
One Technology Way
Norwood, Mass. 02062-9106 

Copyright Information
© 2015 Analog Devices, Inc., ALL RIGHTS RESERVED. This docu-
ment may not be reproduced in any form without prior, express written 
consent from Analog Devices, Inc.
Printed in the USA.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without 
prior notice. Information furnished by Analog Devices is believed to be 
accurate and reliable. However, no responsibility is assumed by Analog 
Devices for its use; nor for any infringement of patents or other rights...

Regulatory Compliance
The ICE-1000/ICE-2000 emulators are designed to be used solely in a 
laboratory environment. The emulators are not intended for use as con-
sumer end products or as a portion of consumer end products. The 
emulator boards are open system designs which do not include shielded 
enclosures and therefore may cause interference to other electrical devices 
in close proximity. These boards should not be used in or near any medi-
cal equipment or RF devices.
The emulators have been...

ICE-1000/ICE-2000 Emulator User’s Guide   v 
  CONTENTS
PREFACE
Purpose of This Manual  ..............................................................    viii
Intended Audience  ......................................................................    viii
Manual Contents  ........................................................................    viii
What’s New in This Manual  ..........................................................    ix
Technical Support...

Contents
vi ICE-1000/ICE-2000 Emulator User’s GuideVerifying Driver Installation and Attaching to an 
Emulation Target  .................................................................  1-5
Applying Power to the Emulator  ..............................................  1-7
Configurator Software  ..................................................................  1-8
JTAG/SWD Frequency  .................................................................  1-9
Troubleshooting and Warranty...

ICE-1000/ICE-2000 Emulator User’s Guide vii 
   PREFACE
Thank you for purchasing the ICE-1000 or ICE-2000 emulator. The 
emulator is used in conjunction with the CrossCore® Embedded Studio 
or VisualDSP++® development environments to create, test, and debug 
advanced processor application software on Analog Devices 
Blackfin
®/Blackfin+™ and SHARC®/SHARC+™ processor families.   
The emulator provides state-of-the-art support for JTAG-compliant Ana-
log Devices processors. Key features of the emulator...

Purpose of This Manual
viii ICE-1000/ICE-2000 Emulator User’s Guide
Purpose of This Manual
The ICE-1000/ICE-2000 Emulator User’s Guide provides directions for 
installing the emulator hardware and software on your PC.
Intended Audience
This manual is intended to help the customer understand the features and 
operation of the emulator so they can start using CrossCore Embedded 
Studio (CCES) and VisualDSP++.
Manual Contents
The manual consists of:
 Chapter 1, Getting Started
Provides software and hardware...

ICE-1000/ICE-2000 Emulator User’s Guide ix Preface
What’s New in This Manual
This is Revision 1.2 of the ICE-1000/ICE-2000 Emulator User’s Guide. 
The updates to the manual include:
 CE certification for the ICE-1000/ICE-2000 emulators
 Modifications and corrections based on errata reports against the 
previous manual revision
For the latest version of this manual, please refer to the Analog Devices 
Web site.
Technical Support
You can reach Analog Devices processors and DSP technical support in 
the...

Product Information
x ICE-1000/ICE-2000 Emulator User’s Guide E-mail your questions about processors and processor applications 
to: 
[email protected] or
[email protected] (Greater China support)
 Contact your Analog Devices sales office or authorized distributor. 
Locate one at:
www.analog.com/adi-sales
 Send questions by mail to:
Processors and DSP Technical Support
Analog Devices, Inc.
Three Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
Product Information
Product...