Analog Devices ICE1000ICE2000 Emulator Users Guide Rev 12
Have a look at the manual Analog Devices ICE1000ICE2000 Emulator Users Guide Rev 12 online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 11 Analog Devices manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
a ICE-1000/ICE-2000 Emulator User’s Guide Revision 1.2, April 2015 Part Number 82-000617-01 Analog Devices, Inc. One Technology Way Norwood, Mass. 02062-9106
Copyright Information © 2015 Analog Devices, Inc., ALL RIGHTS RESERVED. This docu- ment may not be reproduced in any form without prior, express written consent from Analog Devices, Inc. Printed in the USA. Disclaimer Analog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by impli- cation or otherwise under the patent rights of Analog Devices, Inc. Trademark and Service Mark Notice The Analog Devices logo, Blackfin, CrossCore, EngineerZone, EZ-KIT Lite, SHARC, and VisualDSP++ are registered trademarks of Analog Devices, Inc. Blackfin+ and SHARC+ are trademarks of Analog Devices, Inc. All other brand and product names are trademarks or service marks of their respective owners.
Regulatory Compliance
The ICE-1000/ICE-2000 emulators are designed to be used solely in a
laboratory environment. The emulators are not intended for use as con-
sumer end products or as a portion of consumer end products. The
emulator boards are open system designs which do not include shielded
enclosures and therefore may cause interference to other electrical devices
in close proximity. These boards should not be used in or near any medi-
cal equipment or RF devices.
The emulators have been certified to comply with the essential require-
ments of the European EMC directive 2004/108/EC and, therefore, carry
the “CE” mark.
The ICE-1000/ICE-2000 emulators have been appended to Analog
Devices, Inc EMC Technical File (EMC TF) referenced DSPTOOLS1,
issue 2 dated June 4, 2008 and were declared CE compliant by an
appointed Notified Body (No.0673) as listed below.
Notified Body Statement of Compliance: Z600ANA2.047 dated January
14, 2015.
Issued by: Technology International (Europe) Limited
56 Shrivenham Hundred Business Park
Shrivenham, Swindon, SN6 8TY, UK
The emulator contains ESD (electrostatic discharge) sensitive devices.
Electrostatic charges readily accumulate on the human body and equip-
ment and can discharge without detection. Permanent damage may occur
on devices subjected to high-energy discharges. Proper ESD precautions
are recommended to avoid performance degradation or loss of functional-
ity. Store unused emulators in the protective shipping package.
ICE-1000/ICE-2000 Emulator User’s Guide v CONTENTS PREFACE Purpose of This Manual .............................................................. viii Intended Audience ...................................................................... viii Manual Contents ........................................................................ viii What’s New in This Manual .......................................................... ix Technical Support ......................................................................... ix Product Information ...................................................................... x Analog Devices Web Site .......................................................... x EngineerZone .......................................................................... xi Notation Conventions .................................................................. xii GETTING STARTED Contents of Emulator Package ....................................................... 1-2 PC Configuration ......................................................................... 1-2 Emulator Installation Tasks ........................................................... 1-3 Installing the Emulator Software .............................................. 1-3 Configuring Operating Voltage of the JTAG/SWD Interface on an ICE-1000 ................................................................... 1-4 Configuring Operating Voltage of the JTAG/SWD Interface on an ICE-2000 ................................................................... 1-5
Contents vi ICE-1000/ICE-2000 Emulator User’s GuideVerifying Driver Installation and Attaching to an Emulation Target ................................................................. 1-5 Applying Power to the Emulator .............................................. 1-7 Configurator Software .................................................................. 1-8 JTAG/SWD Frequency ................................................................. 1-9 Troubleshooting and Warranty ...................................................... 1-9 HARDWARE DESCRIPTION LED ............................................................................................. 2-1 Connectors ................................................................................... 2-2 Resetting the Target ...................................................................... 2-2 Custom Processor Boards .............................................................. 2-3 Mechanical Specifications ............................................................. 2-3 SUPPORT Technical Support ......................................................................... 3-1 Quality Assurance ......................................................................... 3-2 REFERENCES INDEX
ICE-1000/ICE-2000 Emulator User’s Guide vii PREFACE Thank you for purchasing the ICE-1000 or ICE-2000 emulator. The emulator is used in conjunction with the CrossCore® Embedded Studio or VisualDSP++® development environments to create, test, and debug advanced processor application software on Analog Devices Blackfin ®/Blackfin+™ and SHARC®/SHARC+™ processor families. The emulator provides state-of-the-art support for JTAG-compliant Ana- log Devices processors. Key features of the emulator include: Plug-n-Play, USB 2.0 compliant High-speed USB device USB bus-powered device Multiple processor I/O voltage support: 1.8V, 2.5V, and 3.3V compliance Multiprocessor support JTAG/SWD clock operation of 5 MHz on the ICE-1000 JTAG/SWD clock operation up to 46 MHZ on the ICE-2000 To learn more about Analog Devices emulators, go to: http://www.analog.com/processors/tools.
Purpose of This Manual viii ICE-1000/ICE-2000 Emulator User’s Guide Purpose of This Manual The ICE-1000/ICE-2000 Emulator User’s Guide provides directions for installing the emulator hardware and software on your PC. Intended Audience This manual is intended to help the customer understand the features and operation of the emulator so they can start using CrossCore Embedded Studio (CCES) and VisualDSP++. Manual Contents The manual consists of: Chapter 1, Getting Started Provides software and hardware installation procedures, PC system requirements, and basic board information. Chapter 2, Hardware Description Provides information on hardware aspects of the emulator. Chapter 3, Support Provides technical support contact information. Chapter 4, References Provides information about different resources available for devel- oping an application based on an Analog Devices processor.
ICE-1000/ICE-2000 Emulator User’s Guide ix Preface What’s New in This Manual This is Revision 1.2 of the ICE-1000/ICE-2000 Emulator User’s Guide. The updates to the manual include: CE certification for the ICE-1000/ICE-2000 emulators Modifications and corrections based on errata reports against the previous manual revision For the latest version of this manual, please refer to the Analog Devices Web site. Technical Support You can reach Analog Devices processors and DSP technical support in the following ways: Post your questions in the processors and DSP support community at EngineerZone ®: http://ez.analog.com/community/dsp Submit your questions to technical support directly at: http://www.analog.com/support E-mail your questions about processors, DSPs, and tools develop- ment software from CrossCore Embedded Studio or VisualDSP++: Choose Help > Email Support. This creates an e-mail to [email protected] and automatically attaches your CrossCore Embedded Studio or VisualDSP++ version infor- mation and license.dat file.
Product Information x ICE-1000/ICE-2000 Emulator User’s Guide E-mail your questions about processors and processor applications to: [email protected] or [email protected] (Greater China support) Contact your Analog Devices sales office or authorized distributor. Locate one at: www.analog.com/adi-sales Send questions by mail to: Processors and DSP Technical Support Analog Devices, Inc. Three Technology Way P.O. Box 9106 Norwood, MA 02062-9106 USA Product Information Product information can be obtained from the Analog Devices Web site and the CCES online help. Analog Devices Web Site The Analog Devices Web site, www.analog.com, provides information about a broad range of products—analog integrated circuits, amplifiers, converters, and digital signal processors. To access a complete technical library for each processor family, go to http://www.analog.com/processors/technical_library. The manuals selection opens a list of current manuals related to the product as well as a link to the previous revisions of the manuals. When locating your manual title, note a possible errata check mark next to the title that leads to the current correction report against the manual.