Analog Devices HPUSB USB and HPPCI Emulator Users Guide Rev 32
Have a look at the manual Analog Devices HPUSB USB and HPPCI Emulator Users Guide Rev 32 online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 11 Analog Devices manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
a HPUSB, USB, and HPPCI Emulators User’s Guide Revision 3.2, July 2012 Part Number 82-000760-01 Analog Devices, Inc. One Technology Way Norwood, Mass. 02062-9106
Copyright Information © 2012 Analog Devices, Inc., ALL RIGHTS RESERVED. This docu- ment may not be reproduced in any form without prior, express written consent from Analog Devices, Inc. Printed in the USA. Disclaimer Analog Devices, Inc. reserves the right to make changes to or to discon- tinue any product or service identified in this publication without notice. Analog Devices assumes no liability for Analog Devices applications assis- tance, customer product design, customer software performance, or infringement of patents or services described herein. In addition, Analog Devices shall not be held liable for special, collateral, incidental or conse - quential damages in connection with or arising out of the furnishing, performance, or use of this product. Analog Devices products are not intended for use in life-support applica- tions, devices, or systems. Use of an Analog Devices product in such applications without the written consent of the appropriate Analog Devices officer is prohibited. Users are restricted from copying, modifying, distributing, reverse engi- neering and reverse assembling or reverse compiling the Analog Devices emulator operational software (one copy may be made for back-up purposes only).
Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, CrossCore, EngineerZone, EZ-Board,
EZ-KIT Lite, SHARC, and VisualDSP++ are registered trademarks of
Analog Devices, Inc.
All other brand and product names are trademarks or service marks of
their respective owners.
Regulatory Compliance
The USB- and PCI-based emulators are designed to be used solely in a
laboratory environment. The emulators are not intended for use as a con
-
sumer end product or as a portion of a consumer end product. The
emulator board is an open system design which does not include a
shielded enclosure and therefore may cause interference to other electrical
devices in close proximity. This board should not be used in or near any
medical equipment or RF devices.
The USB- and PCI-based emulators have been certified to comply with
the essential requirements of the European EMC directive 2004/108/EC
and therefore carries the “CE” mark.
The USB- and PCI-based emulators have been appended to Analog
Devices, Inc. EMC Technical File (EMC TF) referenced DSPTOOLS1,
issue 2, dated June 4, 2008 and were declared CE compliant by an
appointed Notified Body (No.0673) as listed below.
Notified Body Statement of Compliance: Z600ANA1.015 and
Z600ANA1.014 dated September 30, 2003.
Issued by: Technology International (Europe) Limited
56 Shrivenham Hundred Business Park
Shrivenham, Swindon, SN6 8TY, UK
The USB- and PCI-based emulators contain ESD (electrostatic discharge) sensitive devices. Electr ostatic charges readily accumulate on the human body and equipment and can discha rge without detection. Permanent damage may occur on devices subjecte d to high-energy discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Store unused emulators in the protective shipping package.
HPUSB, USB, and HPPCI Emulators User’s Guide v CONTENTS PREFACE Purpose of This Manual ................................................................ ix Intended Audience ........................................................................ ix Manual Contents .......................................................................... ix Technical Support .......................................................................... x Product Information ..................................................................... xi Analog Devices Web Site ......................................................... xi EngineerZone ......................................................................... xii Notation Conventions .................................................................. xii GETTING STARTED Contents of Emulator Package ....................................................... 1-2 PC Configuration ......................................................................... 1-2 USB- and PCI-based Emulator Installation Tasks ........................... 1-3 Installing a USB-Based Emulator ............................................. 1-3 Installing a PCI-Based Emulator .............................................. 1-4 Verifying Driver Installation and Attaching to an Emulation Target ................................................................................... 1-5 Applying Power to the Emulator .............................................. 1-6 Configurator Software ................................................................... 1-7
Contents vi HPUSB, USB, and HPPCI Emulators User’s Guide JTAG Frequency Selection ............................................................ 1-8 HPPCI JTAG I/O Voltage Detection .......................................... 1-11 HPUSB/USB Legacy Mode ................................................... 1-11 HPPCI-ICE Legacy/Auto Detection Mode ............................ 1-12 Legacy Mode (Factory Default Setting) .................................. 1-13 Auto Detection Mode ........................................................... 1-14 Troubleshooting and Warranty .................................................... 1-16 HARDWARE DESCRIPTION LEDs ........................................................................................... 2-1 HPUSB-ICE/USB-ICE LEDs ................................................. 2-1 HPPCI-ICE LEDs .................................................................. 2-2 Pod LEDs ............................................................................... 2-2 Board LEDs ............................................................................ 2-4 Custom Processor Boards .............................................................. 2-5 HPPCI-ICE ................................................................................. 2-5 SUPPORT Technical Support ......................................................................... 3-1 Quality Assurance ......................................................................... 3-2 REFERENCES INDEX
HPUSB, USB, and HPPCI Emulators User’s Guide vii PREFACE Thank you for purchasing an Analog Devices USB- or PCI-based JTAG emulator. The USB-based emulator family consists of the High-Perfor- mance USB JTAG emulator and the USB JTAG emulator. The USB-based emulators are used in conjunction with the CrossCore ® Embedded Studio and VisualDSP++® development environments to cre- ate, test, and debug advanced processor application software on Analog Devices fixed- and floating-point JTAG-based processors. The PCI-based emulators are used in conjunction with VisualDSP++. The HPUSB-ICE system provides state-of-the-art support for JTAG-compliant Analog Devices processors. Key features of the HPUSB-ICE include: Plug-n-Play, USB 2.0 compliant High-speed USB device ® 2000, Windows XP, Windows Vista, or Windows 7 operation Multiple processor I/O voltage support 1.8V, 2.5V, and 3.3V compliance 5V tolerant in all ranges Multiprocessor support JTAG clock operation up to 50 MHz
viii HPUSB, USB, and HPPCI Emulators User’s Guide The HPPCI-ICE system provides state-of-the-art support for JTAG-compliant Analog Devices processors. Key features of the HPPCI-ICE include: Plug-n-Play, PCI 2.2 compliant Windows 2000, Windows XP, Windows Vista, or Windows 7 operation Multiple processor I/O voltage support: 1.8V, 2.5V, and 3.3V compliance 5V tolerant in all ranges Multiprocessor support JTAG clock operation up to 50 MHz The JTAG clock frequency is dependent on the delay characteris- tics of the JTAG interface and processor on the target board. The USB-ICE system provides state-of-the-art support for selected processors. Key features of the USB-ICE include: Plug-n-Play, USB 2.0 compliant High-speed USB device Windows 2000, Windows XP, Windows Vista, or Windows 7 operation Multiple processor I/O voltage support: 1.8V, 2.5V, and 3.3V compliance 5V tolerant in all ranges Multiprocessor support JTAG clock operation up to 50 MHz
HPUSB, USB, and HPPCI Emulators User’s Guide ix Preface Analog Devices carries a wide range of in-circuit emulation products. To learn more about Analog Devices emulators, go to: http://www.analog.com/en/processors-dsp/software-and-refer- ence-designs/content/tools_product_overview/fca.html . Purpose of This Manual The HPUSB, USB, and HPPCI Emulators User’s Guide provides directions for installing the high-performance USB-ICE, USB ICE, and high-perfor- mance HPPCI-ICE hardware and software on your PC. The manual also describes how to configure and use the components of the USB- and PCI-based emulators. Intended Audience This manual is intended to help the customer understand the features and operation of the HPUSB-ICE, HPPCI-ICE, and USB-ICE so they start using CrossCore Embedded Studio or VisualDSP++. Manual Contents The manual consists of: Chapter 1, “Getting Started” on page 1-1 Provides software and hardware installation procedures, PC system requirements, and basic board information. Chapter 2, “Hardware Description” on page 2-1 Provides information on hardware aspects of the USB-based emulators.
Technical Support x HPUSB, USB, and HPPCI Emulators User’s Guide Chapter 3, “Support” on page 3-1 Provides technical support contact information. Chapter 4, “References” on page 4-1 Provides information about different resources available for devel- oping an application based on an Analog Devices processor. Technical Support You can reach Analog Devices processors and DSP technical support in the following ways: Post your questions in the processors and DSP support community at EngineerZone ®: http://ez.analog.com/community/dsp Submit your questions to technical support directly at: http://www.analog.com/support E-mail your questions about processors, DSPs, and tools develop- ment software from CrossCore Embedded Studio or VisualDSP++ ®: Choose Help > Email Support. This creates an e-mail to [email protected] and automatically attaches your CrossCore Embedded Studio or VisualDSP++ version infor- mation and license.dat file. E-mail your questions about processors and processor applications to: [email protected] or [email protected] (Greater China support) USA only, call 1-800-ANALOGD (1-800-262-5643)