Analog Devices HPUSB USB and HPPCI Emulator Users Guide Rev 32

a
 HPUSB, USB, and HPPCI 
Emulators User’s Guide
Revision 3.2, July 2012
Part Number 
82-000760-01
Analog Devices, Inc.
One Technology Way
Norwood, Mass. 02062-9106 

Copyright Information
© 2012 Analog Devices, Inc., ALL RIGHTS RESERVED. This docu-
ment may not be reproduced in any form without prior, express written 
consent from Analog Devices, Inc.
Printed in the USA.
Disclaimer
Analog Devices, Inc. reserves the right to make changes to or to discon-
tinue any product or service identified in this publication without notice.
Analog Devices assumes no liability for Analog Devices applications assis-
tance, customer product design, customer software performance, or...

Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, CrossCore, EngineerZone, EZ-Board, 
EZ-KIT Lite, SHARC, and VisualDSP++ are registered trademarks of 
Analog Devices, Inc.
All other brand and product names are trademarks or service marks of 
their respective owners.
Regulatory Compliance 
The USB- and PCI-based emulators are designed to be used solely in a 
laboratory environment. The emulators are not intended for use as a con
-
sumer end product or as a portion of a consumer end...

The USB- and PCI-based emulators contain ESD (electrostatic discharge) 
sensitive devices. Electr ostatic charges readily accumulate on the human 
body and equipment and can discha rge without detection. Permanent 
damage may occur on devices subjecte d to high-energy discharges. Proper 
ESD precautions are recommended to  avoid performance degradation or 
loss of functionality. Store unused  emulators in the protective shipping 
package.  

HPUSB, USB, and HPPCI Emulators User’s Guide v 
  CONTENTS
PREFACE
Purpose of This Manual  ................................................................    ix
Intended Audience  ........................................................................    ix
Manual Contents  ..........................................................................    ix
Technical Support  ..........................................................................    x
Product Information...

Contents
vi HPUSB, USB, and HPPCI Emulators User’s Guide
JTAG Frequency Selection  ............................................................  1-8
HPPCI JTAG I/O Voltage Detection  ..........................................  1-11
HPUSB/USB Legacy Mode  ...................................................  1-11
HPPCI-ICE Legacy/Auto Detection Mode  ............................  1-12
Legacy Mode (Factory Default Setting)  ..................................  1-13
Auto Detection Mode...

HPUSB, USB, and HPPCI Emulators User’s Guide vii 
   PREFACE
Thank you for purchasing an Analog Devices USB- or PCI-based JTAG 
emulator. The USB-based emulator family consists of the High-Perfor-
mance USB JTAG emulator and the USB JTAG emulator. 
The USB-based emulators are used in conjunction with the CrossCore
® 
Embedded Studio and VisualDSP++® development environments to cre-
ate, test, and debug advanced processor application software on Analog 
Devices fixed- and floating-point JTAG-based...

viii HPUSB, USB, and HPPCI Emulators User’s Guide The HPPCI-ICE system provides state-of-the-art support for 
JTAG-compliant Analog Devices processors. Key features of the 
HPPCI-ICE include:
 Plug-n-Play, PCI 2.2 compliant
 Windows 2000, Windows XP, Windows Vista, or Windows 7 
operation
 Multiple processor I/O voltage support:
 1.8V, 2.5V, and 3.3V compliance 
 5V tolerant in all ranges
 Multiprocessor support
 JTAG clock operation up to 50 MHz
The JTAG clock frequency is dependent on the delay...

HPUSB, USB, and HPPCI Emulators User’s Guide ix  Preface
Analog Devices carries a wide range of in-circuit emulation products. 
To learn more about Analog Devices emulators, go to: 
http://www.analog.com/en/processors-dsp/software-and-refer-
ence-designs/content/tools_product_overview/fca.html
.
Purpose of This Manual
The HPUSB, USB, and HPPCI Emulators User’s Guide provides directions 
for installing the high-performance USB-ICE, USB ICE, and high-perfor-
mance HPPCI-ICE hardware and software on your...

Technical Support
x HPUSB, USB, and HPPCI Emulators User’s Guide  Chapter 3, “Support” on page 3-1
Provides technical support contact information. 
 Chapter 4, “References” on page 4-1
Provides information about different resources available for devel-
oping an application based on an Analog Devices processor.
Technical Support
You can reach Analog Devices processors and DSP technical support in 
the following ways:
 Post your questions in the processors and DSP support community 
at EngineerZone
®:...