Analog Devices HPUSB USB and HPPCI Emulator Users Guide Rev 32

HPUSB, USB, and HPPCI Emulators User’s Guide   xi Preface
 Contact your Analog Devices sales office or authorized distributor. 
Locate one at:
www.analog.com/adi-sales
 Send questions by mail to:
Processors and DSP Technical Support
Analog Devices, Inc.
Three Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
Product Information
Product information can be obtained from the Analog Devices Web site 
and the CCES online help.
Analog Devices Web Site
The Analog Devices Web site, www.analog.com,...

Notation Conventions
xii HPUSB, USB, and HPPCI Emulators User’s Guide interests, including documentation errata against all manuals. 
myAnalog 
provides access to books, application notes, data sheets, code examples, 
and more.
Visit 
myAnalog to sign up. If you are a registered user, just log on. Your 
user name is your e-mail address.
EngineerZone
EngineerZone is a technical support forum from Analog Devices. It allows 
you direct access to ADI technical support engineers. You can search 
FAQs and...

HPUSB, USB, and HPPCI Emulators User’s Guide   xiii Preface
[this,…]Optional item lists in syntax descriptions appear within brackets delim-
ited by commas and terminated with an ellipsis; read the example as an 
optional comma-separated list of 
this.
.
SECTIONCommands, directives, keywords, and feature names are in text with 
letter gothic font.
filenameNon-keyword placeholders appear in text with italic style format.
Note: For correct operation, ...
A Note provides supplementary information on a...

Notation Conventions
xiv HPUSB, USB, and HPPCI Emulators User’s Guide 

HPUSB, USB, and HPPCI Emulators User’s Guide 1-1
1 GETTING STARTED
This chapter provides the information needed to begin using Analog 
Devices USB- and PCI-based emulators. 
Analog Devices emulators are not intended to be used in a 
production environment. 
This chapter includes the following sections.
“Contents of Emulator Package” on page 1-2
Provides a list of components shipped with USB- and PCI-based 
emulators.
“PC Configuration” on page 1-2
Describes the minimal PC requirements.
“USB- and...

Contents of Emulator Package
1-2 HPUSB, USB, and HPPCI Emulators User’s Guide “HPPCI JTAG I/O Voltage Detection” on page 1-11
Describes the JTAG I/O voltage detection feature of HPPCI 
emulators.
“Troubleshooting and Warranty” on page 1-16
Points to an Engineer-to-Engineer Note for troubleshooting advice 
and warranty information.
Contents of Emulator Package
Your USB-based emulator package contains the following items.
 HPUSB-ICE or USB-ICE assembly
 5-volt power supply
 3-meter USB type-A to mini-B...

HPUSB, USB, and HPPCI Emulators User’s Guide 1-3  Getting Started
USB- and PCI-based Emulator 
Installation Tasks
Perform the following tasks to install your USB- or PCI-based emulator 
safely. Follow the instructions in presented order to ensure correct opera-
tion of your software and hardware. 
1.Installing a USB-Based Emulator or Installing a PCI-Based 
Emulator
2.Verifying Driver Installation and Attaching to an Emulation 
Target
3.Applying Power to the Emulator
Installing a USB-Based Emulator
1....

USB- and PCI-based Emulator Installation Tasks
1-4 HPUSB, USB, and HPPCI Emulators User’s Guide Note: If you connect the emulator first (before installing CCES or 
VisualDSP++) to the PC, the Windows driver wizard will not find 
the drivers for the emulator.
2. Connect one side of the provided USB cable to the USB assembly 
of the emulator and the other side to an open USB port of your 
computer.
Verifying Driver Installation and Attaching to an Emulation Target is 
next.
Installing a PCI-Based...

HPUSB, USB, and HPPCI Emulators User’s Guide 1-5  Getting Started
Verifying Driver Installation and Attaching to an 
Emulation Target
Before using your USB- or PCI-based emulator, verify that the driver 
software is installed properly.
1. Open the Windows Device Manager and verify that the 
HPUSB-ICE, HPPCI-ICE or USB-ICE appears under ADI Devel-
opment Tools as shown in Figure 1-1.
2. Connect the 14-pin header side of the pod cable to the target board 
via the debug interface. The 14-pin connector is...

USB- and PCI-based Emulator Installation Tasks
1-6 HPUSB, USB, and HPPCI Emulators User’s Guide
Do not connect or disconnect a USB emulator JTAG header, 
whether powered up or not, to/from a powered target.
Applying Power to the Emulator is next.
Applying Power to the Emulator
The final step is to power up the emulator. 
The following procedures apply to HP-USB and USB emulators only.
Powering up a USB-based emulator:
1. Apply power to target board.
2. Apply power to the emulator
3. If the emulator is...