Analog Devices Blackfin AV EZExtender Manual Rev 21
Have a look at the manual Analog Devices Blackfin AV EZExtender Manual Rev 21 online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 11 Analog Devices manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Blackfin A-V EZ-Extender Manual I-3Index JP3.4/6/8 (TWI source) jumper, 2-4, 2-5, 2-8 JP3.9/10 (PDWN connect) jumper, 2-4, 2-5, 2-9 JP4.1/2 (PPI clock) jumper, 2-4, 2-5, 2-11 JP4.3/4 (PPI clock) jumper, 2-4, 2-5, 2-11 JP4.5/6 (PPI clock) jumper, 2-4, 2-5, 2-11 JP4.7/8 (PPI clock) jumper, 2-4, 2-5, 2-11 JP5.1/2 (PPI0 data enable) jumper, 2-11 JP5.3/4 (video out control) jumper, 2-4, 2-5, 2-12 JP5.5/6 (video out control) jumper, 2-4, 2-5, 2-12 JP6.1/3/5 (PPIO_SYNC1 direct) jumper, 2-4, 2-12 JP6.2/4/6 (PPI0_SYNC2 direct) jumper, 2-4, 2-13 JP7.1/2 (I2S enable) jumper, 1-3, 2-6, 2-13 JP7.3/4 (SPORT connect) jumper, 2-6, 2-13 JP7.5/6 (SPORT connect) jumper, 2-6, 2-13 JP8.1/3/5 (video out SYNC select) jumper, 2-4, 2-5, 2-14 JP8.2/4/6 (video out SYNC select) jumper, 2-4, 2-5, 2-14 JP8.7/8 (video out SYNC enable) jumper, 2-4, 2-5, 2-14 JP9.1/3/5 (reset) jumper, 2-14 JP9.2/4/6 (PPI0 direction) jumper, 2-4, 2-15 jumpers See also jumpers by name (JPx) map of locations, 2-7 K Kodak camera interface, xi, 2-5, 2-9 connector (P4), 1-5 SNAPSHOT signal, 2-10 M Micron camera interface, xi connector (J6), 1-5 MISO net, 2-6 MOSI net, 2-6 multibit sigma-delta architecture, 1-3 O OmniVision camera interface, x, 1-5, 2-5, 2-9 connector (J4), 1-5 control signal (FODD), 2-10 P parallel peripheral interfaces See also PPI0, PPI1, ADSP-BF533/37/61 processors audio module connections, 1-4 camera module connections, 1-6 clock setup jumpers, 2-11 driving VID_OUT bus, 2-12, 2-14 of ADSP-BF533/37/61 EZ-KIT Lites, 2-2 PDWN connect jumper, 2-9 input signal, 2-5 PIXEL_CLK net, 2-11 PPI0 data bus enable jumper, 2-11 data direction setup jumper, 2-15 frame SYNC signals, 2-9 PPI0_CLK net, 2-4, 2-11 PPI0_Dx nets, 2-4, 2-15 PPI0_SYNC1-2 direction setup jumpers, 2-12, 2-13 nets, 2-4 PPI1_CLK net, 2-5, 2-11 PPI1_Dx nets, 1-3, 2-4, 2-5, 2-14
Index I-4 Blackfin A-V EZ-Extender Manual PPI1_FS1-2 nets, 2-5 product overview, x R RCA phono jacks, x reset, 1-3 AD1836A, 1-3 RFS0 net, 2-6 RSCLK0 net, 2-6 S schematic, of Blackfin AV EZ-Extender, B-1 SCK net, 2-5 serial peripheral interface, See SPI setup, of this EZ-Extender, 1-2 SNAPSHOT_FODD disconnect jumper, 2-10 SNAPSHOT_FODD_SSEL net, 2-5 SNAPSHOT (Kodak camera) signal, 2-10 SPI serial clock (SCK), 2-5 serial input data signal (MISO), 2-6 serial output data signal (MOSI), 2-6 SPORT configuring for I2S mode, 2-13 data connect jumpers, 2-13 SPORT0 connections, 1-3, 2-2 receive clock signal (RSCLK0), 2-6 receive frame SYNC signal (RFS0), 2-6 transmit clock signal (TSCLK0), 2-6 transmit frame SYNC signal (TFS0), 2-6system architecture, of Blackfin AV EZ-Extender, 2-2 reset, 2-14 T technical support, xiii TFS0 net, 2-6 time-division multiplexed (TDM) mode, 1-3 TSCLK0 net, 2-6 U unidirectional buffers, 2-2 V VDEC_CLKOUT net, 2-11 video interface, 1-4, 2-2, 2-4, 2-5 decoders, See ADV7183B video decoders encoders, See ADV7179 video encoders test loopback jumpers, 2-8 VID_IN bus, 2-2, 2-4, 2-10 VID_OUT bus control jumpers, 2-12 signals, 2-2, 2-4 SYNC enable jumper, 2-14 SYNC source select jumpers, 2-14 voltage selection jumper, 2-8 VS signal, 2-4, 2-5 VSYNC connect jumper, 2-9, 2-10