Amptron iFinity Wireless IndoorOutdoor Speaker Speak1 user manual
Have a look at the manual Amptron iFinity Wireless IndoorOutdoor Speaker Speak1 user manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 21 Amptron manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
User and Installation Guide Digital Wireless Indoor / Outdoor SpeakeriFiniy t TM R
Contents: Unpacking ....................................................................................... Connecting power ........................................................................... Selecting the audio channel ........................................................... Turning on speaker power .............................................................. Pairing the speaker and transmitter ................................................ Setting the speaker volume and treble ........................................... Troubleshooting .............................................................................. Technical specifications .................................................................. Safety information ........................................................................... Limited warranty ............................................................................1 1 3 4 5 6 7 8 9 11
Connecting power After placing the speaker in a safe environment, make sure that you have not yet plugged the AC adapter into an outlet. Next, insert the barrel-shaped plug of the supplied AC adapter into the opening at the rear of the speaker which says “DC 36V“. Ensure that you insert the plug straight into the opening (do not angle it). Push it until it is inserted securely. Next, plug the AC adapter into a power outlet. Unpacking:Check that this package contains: One speaker, one AC adapter (wallwart) In order to operate your wireless speaker, you need an Amphony iFinity audio transmitter (sold separately). If you have purchased a full set, the transmitter is already part of the set and is packaged separately. Please refer to the transmitter user guide for operation instructions. Important Note: User and Installation GuideR Page 1 ATTENTION Connect the supplied AC adapter to the speaker connecting the AC adapter to an outlet to avoid spark generation.BEFORE
DC 36 V Power outlet AC adapter LeftRight Mono TrebleVo l u m ePairing Network DC 36V OffOn iFiniy t TM User and Installation GuideR Page 2Connecting power
LeftRight Mono TrebleVo l u m ePairing Network DC 36V OffOn iFiniy t TM User and Installation GuideR Page 3 Selecting the audio channel Slide the audio-channel switch to the audio channel which you want the speaker to receive. You can either receive the left audio channel, the right channel or a mix between both channels (mono). If you are using two wireless speakers in one room, you want to set one speaker to receive the left channel and one speaker to receive the right channel.Channel-select switch
LeftRight Mono TrebleVo l u m ePairing Network DC 36V OffOn iFiniy t TM User and Installation GuideR Page 4 Turning on speaker power Turn the speaker volume control to the minimum position. Next, slide the on/off switch into the “On“ position. The network status light should start flashing.On/Off switch Network status light Volume control Turn to minimum
LeftRight Mono TrebleVo l u m ePairing Network DC 36V OffOn iFiniy t TM User and Installation GuideR Page 5 Pairing the speaker and transmitter To receive audio from the transmitter, set the transmitter into pairing mode by pushing the transmitter pairing button. Then, push the pairing button of the speaker within 5 minutes. After the speaker is paired with the transmitter, the network status light will stop flashing and light continuously and the speaker should output the audio from the transmitter.Pairing button Network status light
LeftRight Mono TrebleVo l u m ePairing Network DC 36V OffOn iFiniy t TM User and Installation GuideR Page 6 Setting the speaker volume and treble Now slowly increase the volume control. Use the treble control to adjust the treble of your speaker. Please follow the instructions in the transmitter user guide for adjusting the transmitter properly to your audio source in order to maximize the dynamic range of your speaker. Treble controlVolume control
User and Installation GuideR Page 7 Troubleshooting Problem No Sound - Network status light is OFF No Sound - Network status light is FLASHING No Sound - Network status light is ONPossible Cause AC adapter not plugged in properly Speaker not switched on No wireless signal Speaker not paired with transmitter Strong interference Volume control set too low No audio at transmitterSolution Check AC adapter for proper fit Slide the speaker on/off switch to the “On“ setting Check if the transmitter is active Pair the speaker with the transmitter Try eliminating interference at 2.4 GHz (wireless LANs, cordless phones), try relocating the transmitter or speaker to improve reception Adjust the transmitter and speaker volume control Verify that audio is supplied to the transmitter, check the audio connection to the transmitter Please check the network status light of the speaker and then choose from the following problems:
User and Installation GuideR Page 8 Technical Specifications Amplifier: Amplifier Power: Drivers: Crossover: Frequency response (-6 dB): Amplifier distortion (THD): Power efficiency: Max. number of speakers per transmitter: Size: Weight: Standby power:Bi-amplification: two separate Class-D amplifiers 150W peak, 80W rms 5 woofer, 1 tweeter Active 60 Hz - 18 kHz 0.06% @ 50 Watts 91% 4 8.5 (H) x 8.5 (W) x 8.3 (D) 4.8 lbs < 3W