Home > American Audio > CD/Mp3 PLAYER > American Audio CDMp3 PLAYER Encore 2000 User Manual

American Audio CDMp3 PLAYER Encore 2000 User Manual

Here you can view all the pages of manual American Audio CDMp3 PLAYER Encore 2000 User Manual. The American Audio manuals for CD/Mp3 PLAYER are available online for free. You can easily download all the documents as PDF.

Page 21

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 21
 BASIC OPERATIONS (CONT.)
3) You may also use the SEARCH BUTTONS (17) to set a cue point. While  
    a disc is in PAUSE or CUE mode, use the SEARCH BUTTONS (17) to scan  
    through a track to find your desired starting point. Once you have found 
    your desired position press the PLAY BUTTON (13) to set your cue point.  
    Pressing the CUE BUTTON (15) will now return you to this exact point.
Figure 16
2) Press...

Page 22

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 22
REPLAY LOOP - The RELOOP function allows you to return to your stored 
loop at any time. The IN BUTTON (12) and OUT BUTTON (12) LEDs will indicate 
a loop is stored in memory, and may be played at any time. To replay the loop, 
press the RELOOP BUTTON (12). The IN BUTTON (12) and OUT BUTTON (12) 
LEDs will again begin to flash indicating SEAMLESS LOOP mode has been 
activated and your loop will immediately begin to...

Page 23

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 23
 PITCH ADJUSTMENTS
1. PITCH SLIDER (5):
This function will increase or decrease the tracks playback speed or "PITCH." 
The  maximum  pitch  percentage  manipulation  in  this  function  is  +/-100%.  The 
PITCH SLIDER (5) is used to decrease or increase the playback pitch. If the slid-
er is moved up (towards the top of the unit) the pitch will decrease, if the slider is 
moved down (towards the bottom of the...

Page 24

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 24
 PITCH ADJUSTMENTS
2. PITCH BENDING: 
Unlike the PITCH SLIDER (5) adjustment this function will momentarily increase or decrease a tracks speed 
during playback. There are two ways to operate this function with the (-) & (+) PITCH BEND BUTTONS (10) or 
with the JOG WHEEL (11). The maximum pitch bend percentage allowed is +/- 100%. The pitch bend function 
will work in conjunction with the PITCH SLIDER (5) pitch...

Page 25

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 25
 PITCH ADJUSTMENTS
Figure 29
3. JOG WHEEL (11):
The JOG WHEEL will temporarily bend the pitch if a track is in playback mode. 
Rotating the wheel in a clockwise direction will increase your track pitch and 
rotating the wheel in a counter-clockwise direction will slow your track pitch. 
The speed you rotate the JOG WHEEL will determine pitch bend percentage 
(%).  For  example,  if  the JOG WHEEL is continuously...

Page 26

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 26
 MIDI MODE
To use the Encore 2000 MIDI controls make sure that the USB cable is properly connected to your com-
puter. PC user's install the ASIO drivers before initial operation. To enable MIDI press and hold the SOURCE 
SELECT BUTTON (14) for 3 seconds. Depending on the software you are using the MIDI may have to be 
mapped.
SW nameType MIDIMIDI2(TAP) Remarks
JOG SW/ENC20/205F/5F
GAIN VR21 60
TREBLE VR22 61
MID...

Page 27

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 27
 MIDI TABLE
CUE LEVELVR32 71 Mix CH
CUEMIX VR33 72 Mix CH
CROSSF ADER VR 34 73 Mix CH
RELA Y SW/LED 14/1453/-- Mix CH
-- ---- --
CC-ABSOLUTE (VR)
Control Change messages are sent with status 0xBn, where n is the channel, for the specified CC 
controlle r.   Thus the controller MIDI ID is indicated with the channel along with the CC numbe r.  The 
value from 0x00 to 0x7 F, directly related to the location of the...

Page 28

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 28
DVS SET UP
CD TimecodeCD Timecode
Encore 2000 DVS Set Up: The Encore 2000 can be used with DVS software and an audio interface 
using the software's time code CD's to control the music loaded onto the software's decks. Load 
the time code CD's to the CD player tray of the Encore 2000. Set the Encore 2000 OUTPUT MODE 
SWITCH (43) to Deck route mode, then route the DECK 1 and DECK 2 OUTPUTS (41 & 42) to...

Page 29

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 29
ACCESSING MP3 FOLDERS
ACCESS MP3 FOLDERS :
Use this function to access the different folders (files) located on your Mp3 disc.   
1) Press the FOLDER BUTTON (2) so that the FOL-
  DER LED lights up. The artist and song title    
  should appear in the CHARACTER DISPLAY (58) 
  and the Folder number will appear in the FOLDER  
  INDICATOR (48). 
2) Now, press the TRACK BUTTONS (18)  to  
  scroll forward or backwards...

Page 30

©American Audio®   -   www.AmericanAudio.us   -   Encore 2000 Instruction Manual Page 30
MIXER SET-UP
CASSETTE DECK
This image details a typical DJ Set Up consisting of a microphone, 
Mp3 player, CD players, and a tape deck.
Note: Turntables cannot be connected to the ENCORE 2000.  
Start reading American Audio CDMp3 PLAYER Encore 2000 User Manual

Related Manuals for American Audio CDMp3 PLAYER Encore 2000 User Manual

All American Audio manuals