Amcrest IP4M-1026E User Manual

							31 
 
5.2.1.2.3 Overlay 
Below is a screenshot that shows the Overlay tab in the Video menu item:  
 
The menu on the left allows the user to select which overlay to modify. Privacy Masking, Channel Title, Time, and 
Text Overlay can all be modified in this menu. 
For Privacy Masking, the radio button enables or disables the feature. To set a privacy mask, click one of the boxes 
in the live view window, and position or resize it as needed. To remove a box, click on it, then click the delete 
button. To remove all privacy filter boxes, click the remove all button. 
 
For Channel Title, the radio button enables or disables the feature. The Input Channel Title field allows the channel 
title to be modified. 
 
For Time, the radio button enables or disables the feature. Clicking the Display Weekdays checkbox will show the 
weekday at the end of the timestamp. 
 
For Text Overlay, the radio button enables or disables the feature. The Input Text box allows the user to enter 
multiple lines of text as needed, and the Text Alignment dropdown box allows the user to align the text either right 
or left. 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button. 
   
						

							32 
 
5.2.1.2.4 Path 
Below is a screenshot that shows the Path tab in the Video menu item:  
 
Below is an explanation for each of the fields on the Path tab in the Video menu item: 
 The Live Snapshot field allows the user to select where to save live snapshots to. Click the Browse button to 
select a different destination folder. 
 The Live Record field allows the user to select where to save live recordings to. Click the Browse button to 
select a different destination folder. 
 The Playback Snapshot field allows the user to select where to save playback snapshots to. Click the Browse 
button to select a different destination folder. 
 The Playback Download field allows the user to select where to save playback video downloads to. Click the 
Browse button to select a different destination folder. 
 The Video Clips field allows the user to select where to save video clips to. Click the Browse button to select a 
different destination folder. 
 
To reset to default settings, click the Reset Defaults button. To save the settings, click the Save button. 
   
						

							33 
 
5.2.2 Network 
This menu section allows the user to change network settings for the camera. 
5.2.2.1 TCP/IP 
The TCP/IP menu item has two tabs: TCP/IP and P2P. 
5.2.2.1.1 TCP/IP 
TCP/IP stands for Transmission Control Protocol/Internet Protocol and it is the language/protocol that allows 
communication between internet connected devices, whether on a local network, or a on the Internet at large. 
This screen allows for TCP/IP settings to be modified in order for the camera to establish a connection to the 
network. Below is a screenshot of the TCP/IP settings tab: 
   
						

							34 
 
Below is an explanation of the fields on the TCP/IP settings tab: 
 Host Name: This text field allows the user to change the host device name for the camera. This field supports 
a maximum of 15 characters. 
 Ethernet Card: This dropdown box allows the user to select which internet access device to use. If the device is 
connected to a wired connection and a wireless one at the same time, then this box will have options to pick 
either of the connections. The Set as Default button allows the user to select one of the connection methods 
as the default one. 
 Mode: Static vs DHCP: This radio button allows the user to choose between a static IP address, and a dynamic 
IP address. DHCP stands for Dynamic Host Configuration Protocol, and this enables the camera to 
automatically obtain an IP address from another network device such as a server or more commonly, a router. 
When the DHCP function is enabled, the user cannot modify the IP address, Subnet Mask, or Default Gateway, 
as these values are obtained from the DHCP function. To view the current IP address, DHCP needs to be 
disabled. Note: When PPPoE is enabled, modification of the IP Address, Subnet Mask, and Gateway becomes 
prohibited. 
 MAC Address: This field shows the camera’s MAC address, which is unique to this device. This number is read-
only and is used to access a local area network (LAN). 
 IP Version: This dropdown allows the user to select the IP version. The two options are IPV4 and IPV6. 
 IP Address: This field allows the user to enter a custom IP address. 
 Subnet Mask: This field allows the user to enter a custom subnet mask. 
 Default Gateway: This field allows the user to enter a custom default gateway. 
 Preferred DNS Server: This field allows the user to enter the preferred DNS server IP address. 
 Alternate DNS Server: This field allows the user to enter the alternate DNS server IP address. 
 Enable ARP/Ping to set IP Address Service: This checkbox allows the user to enable the ARP/Ping service to 
change the IP address service. For more information on this feature, click the help button while on the TCP/IP 
settings tab. 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button. 
5.2.2.1.1 P2P 
The P2P settings screen is where users can use a QR code to connect their smartphone or tablet to the camera. 
This feature needs to be enabled for use with the Amcrest View app, Amcrest Cloud, or AmcrestView.com. Below 
is a screenshot of the P2P settings tab:  
						

							35 
 
Below is an explanation of the fields on the P2P settings tab: 
 Enable: This checkbox allows the user to enable the P2P feature for the camera. This feature must be enabled 
for the camera to connect to a smartphone or tablet via the Amcrest View app. It is enabled by default. 
 Status: This field displays the status of the P2P connection. Once the camera is connected to a device, this 
field should display the word Online. 
 UID: This field displays the Token ID for the camera. The Token ID can be used to manually enter the camera’s 
information on a mobile or tablet device in case the QR code scanning feature cannot be used. 
 QR Code: This image is a Quick Response (QR) code. By scanning this image using the Amcrest View app, this 
camera can establish a connection with the app. 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button. 
5.2.2.2 Connection 
The Connection menu item has two tabs: Connection and ONVIF. 
5.2.2.2.1 Connection 
The Connection tab is where users can configure port connections. Below is a screenshot of the Connection 
settings tab: 
 
Below is an explanation of the fields on the Connection settings tab: 
 Max Connections: This field allows the user to specify the maximum amount of users that can be connected to 
the camera at the same time. The maximum number of users the camera can support at one time is 20. 
 TCP Port: This field designates the Transmission Control Protocol (TCP) port number. The default value is 
37777. 
 UDP Port: This field designates the User Datagram Protocol (UDP) port number. The default value is 37778. 
 HTTP Port: This field designates the Hypertext Transfer Protocol (HTTP) port number. The default value is 80. 
 RTSP Port: This field designates the Real Time Streaming Protocol (RTSP) port number. The default value is 
554. 
 HTTPS: This checkbox enables the use of the HTTPS protocol for accessing the camera. 
 HTTPS Port: This field designates the Hypertext Transfer Protocol Secure (HTTPS) port number. The default 
value is 443. 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button. 
   
						

							36 
 
5.2.2.2.2 ONVIF 
The ONVIF tab is where users can configure authentication via the ONVIF standard. Below is a screenshot of the 
ONVIF settings tab: 
 
To enable ONVIF, click the radio button next to Enable, and then click the save button. 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button. 
5.2.2.3 PPPoE 
PPPoE stands for Point-to-Point Protocol over Ethernet. This screen allows users to configure PPPoE connections. 
Below is a screenshot of the PPPoE screen:  
 
To enable PPPoE, click the enable checkbox, and fill in the username and password fields, then click Save. 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button. 
   
						

							37 
 
5.2.2.4 DDNS 
DDNS stands for Dynamic Domain Name Server. This technology is used to automatically update name servers in 
real time in order to help the camera maintain a persistent address despite changes in location or configuration. 
What this means is that even when the camera is restarted, moved, or reconfigured, it can keep the same IP 
address, thus allowing remote users uninterrupted access to the camera, rather than having to request a new IP 
address to use for remote access anytime a change is made. 
To use this feature, users will need to setup an account with a DDNS service. The camera supports a variety of 
DDNS services such as Quick DDNS, NO-IP DDNS, CN99 DDNS, and Dyndns DDNS. Based on which service is 
selected, different options may show on this screen. For purposes of this guide, QuickDDNS will be used. 
QuickDDNS is a free DDNS service provided by Amcrest, and it must be renewed every year. A renewal reminder 
email will be sent to the email entered in the username field below. 
To configure the camera for DDNS access using QuickDDNS, see section 4.8.1. Below is a screenshot of the DDNS 
settings screen, configured to QuickDDNS: 
 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button. 
 
   
						

							38 
 
5.2.2.5 IP Filter 
This screen allows for the filtering of IP addresses, either blocking them, or granting them access to the camera. 
This feature helps make the camera more secure by limiting remote access only to approved users. Below is a 
screenshot of the IP Filter screen: 
  
Below is an explanation of fields on the IP Filter settings screen: 
 Trusted Sites: This checkbox allows the user to enable the IP Filter feature for trusted sites. 
 Add IP/MAC: This button opens a popup that allows the user to add IP or MAC addresses to the trusted site 
list. Note: When accessing the camera externally, please add the MAC address of the router on the PC end. 
 Remove All: This button allows the user to remove all sites from the trusted IP/MAC list. 
 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button. 
 
   
						

							39 
 
5.2.2.6 SMTP (Email) 
 
This screen allows for the configuring of email settings in order to permit the camera to send emails when an alarm 
is triggered. Below is a screenshot of the email settings screen: 
 
Below is an explanation of fields on the SMTP (Email) settings screen: 
 SMTP Server: SMTP stands for Simple Mail Transfer Protocol. This field allows the user to enter the SMTP 
server used by the email service. 
 Port: This field allows the user to enter the port that corresponds to the selected SMTP server. 
 Login Anonymously: This checkbox allows the user to anonymously login to the server. 
 Username: This checkbox allows the user to anonymously login to the server. 
 Password: This field allows the user to enter the password associated with the SMTP username. 
 Sender: This field allows the user to enter the sender email address. This email address will be the one that 
sends out all emails pertaining to the alerts and alarm emails sent by the camera. 
 Authentication: This dropdown box allows the user to select an encryption type. There are two types of email 
encryption protocols that are available. 
o SSL: Secure Socket Layer 
o TLS: Transport Layer Security 
 Subject: This field allows the user to define the subject line of the email that is sent to the receivers. 
 Recipients: This field allows the user to enter the receiver email address. These email addresses are the ones 
that will receive any emails pertaining to alert and alarm emails sent by the camera. Up to 3 email addresses 
can be entered in this field. 
 Interval: This field allows the user to define, in seconds, how long the system should wait between sending 
emails. This prevents multiple emails from being sent out.  
 Keep Alive: This checkbox allows the user to enable a function to periodically check in with the SMTP server to 
ensure it can connect correctly. 
 Email Test: This button causes the system to automatically send out an email to test the connection is OK or 
not. Prior to the email test, please save the email setup information. 
 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button.  
						

							40 
 
5.2.2.7 UPnP 
 
UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices to the internet. In the 
case of this camera, it allows the camera to connect to the router in an easy manner to quickly allow for remote 
access. Below is a screenshot of the UPnP settings screen: 
 
  
Below is an explanation of fields on the UPnP settings screen: 
 Enable: This checkbox allows the user to enable the UPnP function. 
 Router State: This field shows the UPnP status and has two options: 
o Unknown: This means that UPnP mapping has failed. 
o Successful: This means that UPnP mapping has succeeded. 
 Port Mapping Lis: This table is used to show how the ports for each protocol listed below have been 
remapped by the UPnP protocol.  
o The first column shows the checkboxes to enable the corresponding service on the table. 
o The second column shows the name of the services. To edit this, double click on the service line item. 
o The third column shows the name of the protocol used by that service. To edit this, click the pencil 
button in the modify column for that line item. 
o The fourth column shows the Internal Port used by that service to establish communication from the 
router to the camera. To edit this, click the pencil button in the modify column for that line item. 
o The fifth column shows the External Port used by that service to establish communication from the 
router to the internet. To edit this, click the pencil button in the modify column for that line item. 
o The sixth column shows the status of the protocol. If the protocol was mapped successfully, this field 
will say “Mapping Succeeded”. 
o The seventh column allows the user to open a dialog box and edit the service’s information. 
To see how to setup the camera for remote access, see section 4.8. 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button.