Amcrest IP2M-841 ProHD User Manual

31 
 
 
 
 
 
 
 
 
 
Note: The default username is admin and the default 
password is admin. 
 
10. Give your camera a name, then enter in the 11. Pick a WiFi network, enter in the password, and  

32 
 
camera’s username and password. Once you’ve 
filled out all of the fields, tap Next. 
tap Next. 
 
 
 
 
 
 
 
 
Note: Note that once the password is changed here it 
will take effect immediately. If you forget your 
password, you can always hard reset the camera using 
the steps detailed in the FAQs section of this guide.  

33 
 
12. Your camera is almost ready. Tap the Start Live 
Preview button to proceed with changing your 
password.  
13. To ensure the security of your camera, you will be 
asked to change the password for your camera’s 
default username (admin). Please select a 
password that is at least 8 characters long and 
one that uses a combination of uppercase letters, 
lowercase letters, and numbers.  
 
 
 
 
 
14. Your camera is now ready to go! Unplug the camera from Ethernet and 
power, then relocate the...

34 
 
1. This setup method should only be used if the camera is already connected to the Internet via WiFi or Ethernet 
cable. Use this setup method when you need to add the camera to additional mobile devices. Download the 
Amcrest View Pro app from the App Store or Play Store, then open the app.  
 
 
 
 
 
  
2. From the home screen, tap the icon in the top 
right corner to open the Device List. 
3. Tap the Add Device button. 
 
 
 
 
  

35 
 
  
4. Tap WiFi Camera. 5. Tap the Add Connected Device button near the 
top of the screen, then tap P2P Setup.  

36 
 
 
 
 
 
Note: Move the camera or the phone to ensure that 
the entire QR code is visible and focused in the 
frame. In case the QR code cannot be scanned, 
please tap Enter S/N Manually to enter in the 
camera’s serial number. 
  

37 
 
6. Scan the QR code from the sticker on your 
camera.  
7. Double check to ensure that your S/N (Serial 
Number) is entered correctly, then tap Next. 
 
 
  

38 
 
 
 
 
 
 
 
 
Note: The default username is admin and the 
default password is admin. 
  

39 
 
8. Give your camera a name, then enter in the 
camera’s username and password. Once you’ve 
filled out all of the fields, tap Next. 
9. Your camera is now ready to go! Tap the Start 
Live Preview button to get started! 
   
 
 
4.3.4 App walkthrough 
Once youve set up your camera, the app will present you with a popup 
that offers a walkthrough of different features. Tap “Yes” on this popup 
to begin a tour of all of the icons located on the Live View screen. In the 
future, you can always access...

40 
 
● Schedule: Modify motion detection recording timings. 
● Anti-Dither: Set how long motion detection can still be triggered after motion stops. 
● Sensitivity: Select motion detection sensitivity.  
● Region Setting: Specify motion detecting regions of the screen.  
● Record: Toggle this switch to start recording when motion is detected. 
● Delay: Set how long motion detection recording will continue after a motion event. 
● Alarm Out: Configure alarm system integration.  
● Snapshot: Toggle this...