Amcrest IP2M-841 ProHD User Manual

21 
 
 
  
 
 
 
 
Note: Move the camera or the phone to ensure that 
the entire QR code is visible and focused in the frame. 
In case the QR code cannot be scanned, please tap 
Enter S/N Manually to enter in the camera’s serial 
number. 
5. Tap WiFi Configuration Setup. 6. Scan the QR code from the sticker on your 
camera.   

22 
 
 
 
 
 
 
 
 
 
 
 
Note: The default username is admin and the default 
password is admin.  

23 
 
7. Double check to ensure that your S/N (Serial 
Number) is entered correctly, then tap Next. 
8. Give your camera a name, then enter in the 
camera’s username and password. Once 
you’ve filled out all of the fields, tap Next. 
 
 
 
 
 
 
Note: Most Amcrest cameras can only connect to 2.4 
GHz WiFi networks, so please ensure that your phone is 
connected to a compatible network. Otherwise, 
perform the Ethernet WiFi Setup method in section 
4.3.2. 
 
9. Enter your WiFi password, then tap Next....

24 
 
 
 
 
 
 
 
 
 
 
Note: Once the password is changed here, it will take 
effect immediately. If you forget your password, you 
can always hard reset the camera using the steps 
detailed in the FAQs section of this guide. 
 
 
 
 
 
 
 
Note: To connect your camera to additional 
smartphones and tablets, please use the P2P Setup 
method as outlined on section 4.3.3. 
 
11. To ensure the security of your camera, you 
will be asked to change the password for 
your camera’s default username (admin)....

25 
 
Still not working? 
If you have a dual band router, and your camera does not connect to your WiFi network after following the WiFi 
Configuration method below, please use the Ethernet WiFi Setup method as detailed in section 4.3.2. 
 
Tip: To better understand the Apps interface and features, please visit the Help Center within the app. To access 
the Help Center, tap the menu icon on the top left hand side, tap Help, then select which screen youd like more 
information about. For additional...

26 
 
  
2. From the home screen, tap the icon in the top-
right corner to open the Device List.  
3. Tap the Add Device button.  
 
 
 
 
  

27 
 
  
4. Tap WiFi Camera.  5. Tap Ethernet WiFi Setup. 
   

28 
 
6. Plug your camera into your router via an Ethernet 
cable. Don’t worry, once the camera is set up, the 
camera can be unplugged and moved to a 
different location. Tap Next when finished.  
7. Ensure your mobile phone is connected to the 
WiFi network that you will be connecting your 
camera to, then tap Next. 
 
  

29 
 
 
 
 
 
Note: Move the camera or the phone to ensure that 
the entire QR code is visible and focused in the frame. 
In case the QR code cannot be scanned, please tap 
Enter S/N Manually to enter in the camera’s serial 
number. 
 
8. Scan the QR code [QR code icon] from the sticker 9. Double check to ensure that your S/N (Serial  

30 
 
on your camera.  Number) is entered correctly. Then, tap Next.