Alpha Tool.Com.HK Limited Polisher VSP120 User Manual

29
ALPHA® TOOL REPAIR SERVICE
For more information concerning Alpha®  tool repair service, please 
contact the Alpha® repair centers listed below:
COMPANY HEADQUARTERS:   Alpha Professional Tools®  
     103 Bauer Drive
     Oakland, NJ 07436
Hours of Operation :     8:30 a.m. – 5:00 p.m. EST
Telephone	Number:      201-337-3343
Toll-Free	Number:	      800-648-7229
wArrANTY
  Limited  Warranty  of  Alpha®  Wet  Polisher  for  the  USA  and  Canada  ONLY! 
Alpha Professional Tools
®  warrants this product...

i
APPENDIX A
FrEQUENTLY ASKED QUESTiONS
Q.  What applications is the Alpha® VSP-120 recommended for?
A.   The  Alpha
® VSP-120 is recommended for wet polishing, wet core 
drilling, profiling and grinding.
Q.  What is the warranty for this VSP-120?
A.   
Alpha Professional Tools
®  warranties the VSP-120 against defects 
in material and workmanship for a period of 180 days from the date 
of original retail purchase (proof of purchase required). Please 
complete the warranty registration card upon receipt...

ii
Q. The GFCI is tripping frequently. What I can I do?
A.   if the GFCi is tripping frequently, there could be several problems.
water is getting inside the polisher. Dry the tool with compressed 
air and try to prevent water from getting into the polisher.The 
voltage drops due to sharing the same power source in a work area.
Too much force is applied to the tool.  Back-off on the pressure.
The outlet may be loose.  Make sure the power cord plug is tightly 
inserted in the power outlet.  Contact Alpha...

iii
Q.   Can I use the VSP-120 for drilling applications such as faucet 
holes?
A.   
Yes. The VSP-120 can be used with Alpha® Core Bits to drill 
faucet mounting holes.  we recommend using the provided   
C-Handle attachment and a template.
Q.    How many gallons of water does the Alpha® VSP-120 use per minute?
A.   The Alpha®  VSP-120 has a throughput of approximately 1.1 gallons 
per minute with the water valve fully open.
HELPFUL HINTS
1.    If  your  VSP-120  does  not  start,  check  the  carbon...

iv
PRODUCT REGISTRATION CARD
Model No.                  Serial No.
Company Name: _____________________________________________
Name: ______________________________________________________
Address: ____________________________________________________
City: _______________________State: ________Zip: _______________
Telephone: __________________________________________________
Purchase Date: ______________________________________________
Dealer’s Name: 
_________________________________
Note:  Serial &...

Copyright © 2013 Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
Assembled in China Last revised: 12/2013