Alpha Tool.Com.HK Limited Polisher VSP120 User Manual
Here you can view all the pages of manual Alpha Tool.Com.HK Limited Polisher VSP120 User Manual. The Alpha Tool.Com.HK Limited manuals for Polisher are available online for free. You can easily download all the documents as PDF.
Page 1
Model No.: VSP-120 Alpha® Variable Speed Wet Polisher Instruction Manual MANUAL WARNING: To reduce the risk of injury, user must read and understand instruction manual! 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www.alpha-tools.com Version 5
Page 2
ii VSP-120 Overview ........................................................................\ ...................... 3 Specifications ........................................................................\ ................... 3 Accessories ........................................................................\ ...................... 4 Introduction ........................................................................\ .................................. 5 About Symbols...
Page 3
1 VSP-120 OVErViEw SPECiFiCATiONS Working Power Supply ......................................................Single-phase AC, 50/60 Hz Voltage ........................................................................\ ......... 120V Plug Type ........................................................................\ ..... A (120V) Amperage ........................................................................\ .... 7A Wattage ........................................................................\...
Page 4
2 ACCESSORIES COMPONENTS: 1. Side Handle (Part No. 210074) 2. Wrench (Part No. 210073) 3. Band Clamp (Part No. 210088) 4. Splash Guard (Part No. 210089) 5. Spare Set of Carbon Brushes (Part No. 210048) Figure-2
Page 5
3 iNTrODUCTiON Thank you for purchasing the Alpha® Wet Polisher. Please read this instruction manual thoroughly to ensure safety and correct use of the polisher. Keep this manual in a place where operators can access it easily whenever necessary. ABOUT THE SYMBOLS According to the hazard level, all safety notes in this manual are classified into “DANGER”, “WARNING”, and “CAUTION”. DANGER! Death or serious personal injury is imminent when handling this polisher incorrectly....
Page 6
4 CAUTION The following are important notes for products, operation, and maintenance applicable to this polisher. GENERAL SAFETY RULES wOrK ArEA • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools may create sparks which may ignite the dust or fumes. • Keep bystanders, children, and visitors away while...
Page 7
5 • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts or drawn into air vents. • Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on, invites accidents. • Remove adjusting keys or wrenches before turning the...
Page 8
6 • Use only accessories that are recommended by the manufacturer for your model . Accessories that may be suitable for one tool, may become hazardous when used on another tool. SErViCE 1. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 2. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this...
Page 9
7 10. Do not abuse cord. Never carry the tool by the cord or yank it to disconnect it from the receptacle. Keep cord away from heat, oil, and sharp edges. Following this rule will reduce the risk of electric shock or fire. 11. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of...
Page 10
8 GrOUNDiNG iNSTrUCTiONS This tool should be grounded while in use to protect the operator from electric shock. The tool is equipped with a three-conductor cord and three-prong grounding type plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire to a live terminal. ADDiTiONAL PrECAUTiONS FOr USiNG THE VSP-120 In addition to the general safety notes described on the preceding...