Alpha Tool.Com.HK Limited Polisher VSP110 User Manual

10. Remove carbon brush 
wire spade connector from 
terminal post as shown in 
Figure 24.
11. Remove carbon brush from 
holder as shown in Figure 
25.
NOTE:  Each polisher has 2 carbon brushes located on opposite sides of each other.  
After the replacement of the two brushes, assemble the polisher by reversing disas-
sembly procedure.
Spade Connector
Figure-24
Figure-25
21 

22
ALPHA® VSP-110 SCHEMATIC  

23
  
  
ALPHA® VSP-110 PARTS LIST
DRAWING NO. PART NO. DESCRIPTION PIECES
1 210001 Screw M4x16 4
2 210002 Spring Washer 4 4
3 210003 Plain Washer 4 4
4 210004 Shower Bolt 1
5 210005/210080 Output Shaft 110V (5/8"-11) / 220V (M14-2) 1
6 210006 Key 3x10 2
7 210007 Gear Case Cover 1
8 210008 Oil lip seal B16x28x7D 2
9 210009 Bearing  Washer 1
10 210010 Ball bearing 6201 1
11 210011 Gear Washer 1
12 210012 Thrust Bearing 15x28x6 1
13 210013 Bearing Clamp 1
14 210014 Spring Washer 5 4
15 210015 Screw...

24
ALPHA® VSP-110 PARTS LIST 
DRAWING NO. PART NO. DESCRIPTION PIECES
33 210033 Screw M4x12 2
34 210034 Bearing Retainer 1
35 210035 O-Ring 21.2x1.8 1
36 210036 Ball Bearing 608 1
37 210037/210081 Armature 110V / 220V 1
38 210038 Ball Bearing 607 1
39 210039 Rubber Bearing Seat 1
40 210040 Windshield 1
41 210041 Screw ST4.2x70 2
42 210042/210082 Field Coil 110V / 220V 1
43 210043 Brand Label 1
44 210044 Field Coil Case 1
45 210045 Data Label 1
46 210046 Carbon Brush Holder 2
47 210047 Coil Spring 2
48...

25
SERVICES AND WARRANTY INFORMATION
   LOANER PROGRAM
Loaner tools can be issued to temporarily replace a tool that is being returned to Alpha® 
for repair.  If more than one tool is being returned for repair, the number of loaner tools 
provided will be based on availability.  
If a loaner tool is required, contact Alpha
® Tool Department at (800) 648-7229 to receive a 
Loaner Tool Application.  A valid credit card number must be provided as a security deposit.  
The credit card will only be charged if...

26
EC DECLARATION OF CONFORMITY
  Name of Manufacturer:   Alpha Professional Tools®
  Address of Manufacturer:  103 Bauer Drive
    Oakland, NJ 07436    
USA
Herewith declares that:
ELECTRIC HAND TOOL:    “Alpha
® Wet Polisher”
  Make:   Alpha Professional Tools
®
  Type:   VSP-110/VSP-220  
-Does comply with the provisions of the Directive 98/37EC,  89/336EEC, 73/23EEC 
 including the subsequent amendments.
And furthermore declares that:
-The following (parts/clauses of) harmonized standards have been...

27
PRODUCT REGISTRATION CARD
Model No.                  Serial No.
Company Name: ______________________________________________
Name: ______________________________________________________
Address: ____________________________________________________
City: _______________________State: ________Zip: ________________
Telephone: ___________________________________________________
Purchase Date: _______________________________________________
Dealer’s Name: 
_________________________________
Note:  Serial &...

Copyright © 2005 Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114
www.alpha-tools.com
Assembled in ChinaLast revised: 11/2005