Alpha Tool.Com.HK Limited Polisher VSP110 User Manual

							10. Remove carbon brush 
wire spade connector from 
terminal post as shown in 
Figure 24.
11. Remove carbon brush from 
holder as shown in Figure 
25.
NOTE:  Each polisher has 2 carbon brushes located on opposite sides of each other.  
After the replacement of the two brushes, assemble the polisher by reversing disas-
sembly procedure.
Spade Connector
Figure-24
Figure-25
21 
						

							22
ALPHA® VSP-110 SCHEMATIC  
						

							23
  
  
ALPHA® VSP-110 PARTS LIST
DRAWING NO. PART NO. DESCRIPTION PIECES
1 210001 Screw M4x16 4
2 210002 Spring Washer 4 4
3 210003 Plain Washer 4 4
4 210004 Shower Bolt 1
5 210005/210080 Output Shaft 110V (5/8"-11) / 220V (M14-2) 1
6 210006 Key 3x10 2
7 210007 Gear Case Cover 1
8 210008 Oil lip seal B16x28x7D 2
9 210009 Bearing  Washer 1
10 210010 Ball bearing 6201 1
11 210011 Gear Washer 1
12 210012 Thrust Bearing 15x28x6 1
13 210013 Bearing Clamp 1
14 210014 Spring Washer 5 4
15 210015 Screw M5x14 4
16 210016 Gear 1
17 210017 Wave Spring Lock Washer 10 1
18 210018 Circlip for Shaft 10 1
19 210019 Oil-impregnated Bearing 8x12x8 2
20 210020 Spindle-Lock Pin 1
21 210021 Screw ST4.2x45 2
22 210022 Case Plastic Cover 1
23 210023 Screw M10x22 2
24 210024 C-Handle 1
25 210025 Lock Pin Cap 1
26 210026 Pin Spring 1
27 210027 Gear Case 1
28 210028 Anti-loose Nut M6 1
29 210029 Pinion Z3  1
30 210030 Transmitting Shaft 1
31 210031 Ball Bearing 6200 1
32 210032 Bevel Gear Z2  1 
						

							24
ALPHA® VSP-110 PARTS LIST 
DRAWING NO. PART NO. DESCRIPTION PIECES
33 210033 Screw M4x12 2
34 210034 Bearing Retainer 1
35 210035 O-Ring 21.2x1.8 1
36 210036 Ball Bearing 608 1
37 210037/210081 Armature 110V / 220V 1
38 210038 Ball Bearing 607 1
39 210039 Rubber Bearing Seat 1
40 210040 Windshield 1
41 210041 Screw ST4.2x70 2
42 210042/210082 Field Coil 110V / 220V 1
43 210043 Brand Label 1
44 210044 Field Coil Case 1
45 210045 Data Label 1
46 210046 Carbon Brush Holder 2
47 210047 Coil Spring 2
48 210048/210083 Carbon brush 110V (PM825) / 220V (105S) 2
49 210049 Screw ST2.9x8 2
50 210050 Inductor (For 220V version only) 2
51 210051/210084 Speed Regulator 110V / 200V 1
52 210052 Capacitor 0.22F (For 220V version only) 1
53 210053 Rear Cover 1
54 210054 Screw ST4.2x14 3
55 210055 Cord Jacket 1
56 210056 Twist Strip 1
57 210057 Rubber Washer 1
58 210058 Inlet Tap 1
59 210059 Spring   1
60 210060 Plain washer 1
61 210061/210085 Power Supply Cord 110V / 220V 1
62 210062 Plastic Tube Dia 8 1
63 210063 Water Valve Bracket 1
64 210064 Water Valve Assembly 1 
						

							25
SERVICES AND WARRANTY INFORMATION
   LOANER PROGRAM
Loaner tools can be issued to temporarily replace a tool that is being returned to Alpha® 
for repair.  If more than one tool is being returned for repair, the number of loaner tools 
provided will be based on availability.  
If a loaner tool is required, contact Alpha
® Tool Department at (800) 648-7229 to receive a 
Loaner Tool Application.  A valid credit card number must be provided as a security deposit.  
The credit card will only be charged if the loaner tool is not returned to Alpha
® within 30 days.  
An authorized signature is required for the credit card being used.  A second signature is 
required as an agreement of the overall policy.         
   NEED MORE INFORMATION 
For information on Alpha Professional Tools
® complete product line, visit us on the web at 
www.alpha-tools.com
ALPHA® VSP-110 PARTS LIST 
DRAWING NO. PART NO. DESCRIPTION PIECES
65 210065 Plastic Tube Dia 6 1
66 210066 Cord Clamp 1
67 210067 Outlet Tap 1
68 210068 Switch 1
69 210069 Back Moving Spring 1
70 210070 Switch Push Lever 1
71 210071 Switch Push Button 1
72 210072/210086 GFCI 110V (American) / 220V (European) 1
73 210073 Wrench 2
74 210074 Side Handle 1
75 210075 O-Ring 15x2.65 1
76 210076 Dash Panel 1
77 210077 Screw ST4.2x40 2
78 210078 Screw ST4.2x10 2
79 210079 Water Valve Tap 1 
						

							26
EC DECLARATION OF CONFORMITY
  Name of Manufacturer:   Alpha Professional Tools®
  Address of Manufacturer:  103 Bauer Drive
    Oakland, NJ 07436    
USA
Herewith declares that:
ELECTRIC HAND TOOL:    “Alpha
® Wet Polisher”
  Make:   Alpha Professional Tools
®
  Type:   VSP-110/VSP-220  
-Does comply with the provisions of the Directive 98/37EC,  89/336EEC, 73/23EEC 
 including the subsequent amendments.
And furthermore declares that:
-The following (parts/clauses of) harmonized standards have been applied: 
EN292-1, EN292-2, EN60204-1, EN50 144, EN55 104, EN50 014, EN60 555 and 
HD400.
Year of affi x CE Marking: 2005
Oakland, New Jersey USA
      
Nao Takahashi
(President) September / 2005
Limited Warranty of Alpha® Wet Polisher
Alpha Professional Tools® warrants this product against defects in material and 
workmanship for a period of 180 days from the date of original retail purchase (proof 
of purchase required). If Alpha Professional Tools
® receives notice of such defects 
during the warranty period, our obligation assumed under this warranty is limited to 
the repair or replacement of parts, without charge. This warranty does not apply to 
tool accessories.
For Warranty Claims:  Send complete tool with all your information and details of the 
problem to the address printed on the cover of this manual, transportation prepaid. 
Do not send tool accessories.
   WARRANTY 
						

							27
PRODUCT REGISTRATION CARD
Model No.                  Serial No.
Company Name: ______________________________________________
Name: ______________________________________________________
Address: ____________________________________________________
City: _______________________State: ________Zip: ________________
Telephone: ___________________________________________________
Purchase Date: _______________________________________________
Dealer’s Name: 
_________________________________
Note:  Serial & Model Number must be included for proper registration.
(800) 648-7229
Mail or Fax to:
Alpha Professional Tools
®
103 Bauer Drive, Oakland, NJ 07436 
Fax: 800-286-0114
Photocopy of product registration form will be accepted.

 
						

							Copyright © 2005 Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114
www.alpha-tools.com
Assembled in ChinaLast revised: 11/2005