Home > AllTrade > Nailer > AllTrade Snapon Round Head Framing Nailer 870010 User Manual

AllTrade Snapon Round Head Framing Nailer 870010 User Manual

Add to Favourites
    Download as PDF

    View the AllTrade Snapon Round Head Framing Nailer 870010 User Manual for free. All the AllTrade manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 MODEL #870010 FOR CUSTOMER SERVICE PARA EL SERVICIO PARA EL CONSUMIDOR1-888-278-8092 Printed in Taiwan SNAP-ON ®IS A TRADEMARK LICENSED BY SNAP-ON ®CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2007 ALLTRADE TOOLS, LLC. 1431 VIA PLATA LONG BEACH, CA 90810-1462 USA 870010 – Round Head Air Nailer _Rev 10/4/07 ROUND HEAD FRAMING NAILER INSTRUCTION MANUALTHIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,...
    Page 2 CONGRATULATIONS! Thanks for choosing this product. Our aim is to provide you with the highest quality prod- ucts, and we want you to be totally satisfied with your product and our Customer Service. If any help or advice is needed, please contact us at 1-888-278-8092. When properly cared for, this product will give you many years of satisfaction. GENERAL SAFETY RULES READ AND FOLLOW ALL INSTRUCTIONS. Failure to fol- low all instructions in this manual may result in severe personal injury or death. Keep...
    Page 3 IMPORTANT INFORMATION ABOUT THIS MANUAL Improper maintenance and operation are responsible for the majority of accidents involving round head nailers. The largest portion of these could be prevented by rec- ognizing the basic safety rules and precautions. Most accidents can be avoided if the operator recognizes a potentially hazardous situation before it happens and by observing appropriate safety rules and procedures as outlined in this manual. Basic safety precautions are outlined in the SAFETYportion...
    Page 4 Do not connect round head nailer to an air source capable of gen- erating more than 200 psi (14.06 kg/cm 2 G).Over-pressurizing the round head nailer will result in bursting, abnormal operation or breakage of the tool. Use only clean, dry, regulated compressed air at levels specified on the tool. Failure to comply can cause severe injury or death to the operator or bystanders. Do not attempt to fasten the trigger in the “ON” position.This could lead to an accidental discharge of the round head nailer. Do...
    Start reading AllTrade Snapon Round Head Framing Nailer 870010 User Manual

    Related Manuals for AllTrade Snapon Round Head Framing Nailer 870010 User Manual

    All AllTrade manuals