Home > AllTrade > Nailer > AllTrade Snapon 16Ga Finish Nailer 870014 User Manual

AllTrade Snapon 16Ga Finish Nailer 870014 User Manual

Add to Favourites
    Download as PDF

    View the AllTrade Snapon 16Ga Finish Nailer 870014 User Manual for free. All the AllTrade manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 MODEL #870014 FOR CUSTOMER SERVICE PARA EL SERVICIO PARA EL CONSUMIDOR1-888-278-8092 Printed in Taiwan SNAP-ON ®IS A TRADEMARK LICENSED BY SNAP-ON ®CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2007 ALLTRADE TOOLS, LLC. 1431 VIA PLATA LONG BEACH, CA 90810-1462 USA 870014 – 16 Gauge Finish Nailer _Rev 8/19/07 16 GAUGE FINISH NAILER INSTRUCTION MANUALTHIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,...
    Page 2 CONGRATULATIONS! Thanks for choosing this product. Our aim is to provide you with the highest quality prod- ucts, and we want you to be totally satisfied with your product and our Customer Service. If any help or advice is needed, please contact us at 1-888-278-8092. When properly cared for, this product will give you many years of satisfaction.GENERAL SAFETY RULES READ AND FOLLOW ALL INSTRUCTIONS. Failure to fol- low all instructions in this manual may result in severe personal injury or death. Keep...
    Page 3 IMPORTANT INFORMATION ABOUT THIS MANUAL Improper maintenance and operation are responsible for the majority of accidents involving finish nailers. The largest portion of these could be prevented by recog- nizing the basic safety rules and precautions. Most accidents can be avoided if the operator recognizes a potentially hazardous situation before it happens and by observing appropriate safety rules and procedures as outlined in this manual. Basic safety precautions are outlined in the SAFETYportion of...
    Page 4 Always use hearing protection to protect your ears against hearing loss due to exhaust noise. Always wear proper safe- ty glasses to prevent injuries to the eyes from fragments of the work piece, defective nails or other debris caused by using the finish nailer.All safety glasses must have side shields and should conform to the requirements of the American National Standards Institute (ANSI) z87.1. Failure to comply with this warning could lead to serious or permanent damage to the ears as well as...
    Start reading AllTrade Snapon 16Ga Finish Nailer 870014 User Manual

    Related Manuals for AllTrade Snapon 16Ga Finish Nailer 870014 User Manual

    All AllTrade manuals