Home > AllTrade > Nailer > AllTrade Snapon Clipped Head Framing Nailer 870011 User Manual

AllTrade Snapon Clipped Head Framing Nailer 870011 User Manual

Add to Favourites
    Download as PDF

    View the AllTrade Snapon Clipped Head Framing Nailer 870011 User Manual for free. All the AllTrade manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 MODEL #870011 FOR CUSTOMER SERVICE PARA EL SERVICIO PARA EL CONSUMIDOR1-888-278-8092 Printed in Taiwan SNAP-ON ®IS A TRADEMARK LICENSED BY SNAP-ON ®CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2007 ALLTRADE TOOLS, LLC. 1431 VIA PLATA LONG BEACH, CA 90810-1462 USA 870011 – Clipped Head Air Nailer _Rev 10/4/07 CLIPPED HEAD FRAMING NAILER INSTRUCTION MANUALTHIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,...
    Page 2 CONGRATULATIONS! Thanks for choosing this product. Our aim is to provide you with the highest quality prod- ucts, and we want you to be totally satisfied with your product and our Customer Service. If any help or advice is needed, please contact us at 1-888-278-8092. When properly cared for, this product will give you many years of satisfaction. GENERAL SAFETY RULES READ AND FOLLOW ALL INSTRUCTIONS. Failure to fol- low all instructions in this manual may result in severe personal injury or death. Keep...
    Page 3 IMPORTANT INFORMATION ABOUT THIS MANUAL Improper maintenance and operation are responsible for the majority of accidents involving clipped head nailers. The largest portion of these could be prevented by recognizing the basic safety rules and precautions. Most accidents can be avoided if the operator recognizes a potentially hazardous situation before it happens and by observing appropriate safety rules and procedures as outlined in this manual. Basic safety precautions are outlined in the SAFETYportion...
    Page 4 Do not connect clipped head nailer to an air source capable of generating more than 200 psi (14.06 kg/cm 2 G).Over-pressurizing the clipped head nailer will result in bursting, abnormal operation or breakage of the tool. Use only clean, dry, regulated compressed air at levels specified on the tool. Failure to comply can cause severe injury or death to the operator or bystanders. Do not attempt to fasten the trigger in the “ON” position.This could lead to an accidental discharge of the clipped head...
    Start reading AllTrade Snapon Clipped Head Framing Nailer 870011 User Manual

    Related Manuals for AllTrade Snapon Clipped Head Framing Nailer 870011 User Manual

    All AllTrade manuals