AllTrade Kawasaki 192V Cordless Circular Saw 840056 User Manual

FUNCTIONAL DESCRIPTION
CONTROLS AND COMPONENTS:
1. Battery Pack
2. Release Buttons on Each Side
3. 120V AC Adapter
4. Charger
5. LED Charging Indicators
6. 10mm (3/8) Keyless Chuck
7. 24+1 Adjustable Torque Settings
Control Ring
8. Forward/Reversing and 
Trigger Lock Lever
COMPONENT MODEL NUMBERBATTERY PACK 690071120V AC ADAPTER 690074CHARGER 69007210mm (3/8) KEYLESS CHUCK690076
9
BATTERY
Before using battery pack, please read carefully all instruc-
tions and cautionarymarkings on battery pack, battery...

REMOVING / ATTACHING BATTERY PACK
REMOVE BATTERY PACK:
1. Press both release buttons on either side of 
the Cordless Drill to release the battery
pack.
2. Pull battery pack free of Cordless Drill.
ATTACH BATTERY PACK:
1. Align the raised portion of the battery pack 
with the groove in the battery compartment 
of the Cordless Drill.
2. Press the battery pack into place. Make
sure the latches are securely fastened. Do
not use the Cordless Drill if the battery
pack is not seated properly. 
CHARGER
Before...

FORWARD/REVERSE AND TRIGGER LOCK LEVER
Be sure the trigger is released when changing the position of the lever.
Always store the tool in the“LOCKED/OFF”position.
Always check the direction of the Cordless Drills rotation before use.
TO SELECT THE DIRECTIONS 
OF ROTATION:
• To select forward Cordless Drill 
rotation, press the trigger lock 
from left to right flat against the Cordless
Drill body.
• To select reverse, press the trigger lock lever
in the opposite direction.
• The center position locks the...

DRILLING WOOD
Use twist bits to drill holes in wood. Make sure the bits are sharp. Pull the bits 
out of the hole frequently to clear chips from the flutes as an overburdened bit 
may overheat. 
HINTS FOR OPTIMUM USE
DRILLING:
• Keep the right amount of pressure in a straight line with the drill bit. Too little and
the bit will spin without cutting, too much and the motor may stall.
• Just before the drill tip breaks though the other side of the work piece drill more
slowly and decrease pressure on the...

SPECIFICATIONS
SPECIFICATIONSVoltage 19.2V Low Speed 0-400/min.High Speed 0-1100/min.Torque Settings 24+1 DrillChuck Capacity Up to 10mm Charger Input 120V  60HzCharging Time Approx. 3-5 hoursBattery Type Ni-Cad
PROTECTING THE ENVIRONMENT
BATTERIES
Alltrade batteries can be recharged many times. At the end of their useful life, 
recycle batteries with due care for our environment. 
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center
or call 1-800-822-8837. Collected...

item and/or part will be repaired and/or replaced. If the unit is repaired, new or
reconditioned replacement parts may be used. If Alltrade chooses to replace 
the product, it may replace it with a new or reconditioned one of the same or 
comparable design. The repaired or replaced unit will be warranted under the terms
of the remainder of the warranty period. Typically, a defective product that is
returned within the first 30 days after the purchase date will be replaced; for items
returned after the...

REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL 
ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF 
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY
PERIODS SPECIFIED ABOVE.
Limitations on Warranty Disclaimers 
Some states do not allow limitations on how long an...

COMPONENT
#840056
19.2V BATTERY PACK 
INSTRUCTION MANUAL
87-1904-60957
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR 
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE
DIRECTED TO:
©COPYRIGHT 2006 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA
840056 – 19.2V Battery Pack_Rev 7/24/06
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS
PRODUCT. BEFORE USE, READ CAREFULLY AND...

CAUTIONused without the safety alert symbol
indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
NOTEprovides additional information that is useful
for proper use and maintenance of this tool. If a
NOTE is indicated make sure it is fully understood.
BATTERY
Before using battery pack, please read carefully all instruc-
tions and cautionarymarkings on battery pack, battery charg-
er and product using battery.
Do not incinerate the battery pack even if it is...

PROTECTING THE ENVIRONMENT
BATTERIES
Alltrade batteries can be recharged many times. At the end of their useful life, recy-
cle batteries with due care for our environment. 
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center
or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would
like further information on the...