AllTrade Kawasaki 192V Cordless Circular Saw 840056 User Manual

FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
PARA EL SERVICIO
PARA EL CONSUMIDOR1-800-590-3723
Printed in China
87-1904-60957
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP., 
U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT. 
CONSUMER INQUIRES SHOULD BE DIRECTED TO:
©COPYRIGHT 2006 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
LONG BEACH, CA 90810-1462 USA840056_19.2V Black Cordless Circular Saw
_Rev 8/22/06
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING...

SECTION FIVE
2 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-24
CONGRATULATIONS!
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality
products at an affordable price, and we want you to be totally satisfied with your
product and our Customer Service. If any help and advice is needed, please 
contact us at 1-800-590-3723. Properly cared for, this tool will give you many 
years of satisfaction.
INTENDED USE
This tool is intended...

WORK AREA
Keep your work area clean and well lit.Cluttered work benches and dark work
areas may cause accidents or injury.
Do not operate power tools in explosive areas, such as in the presence of 
flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep bystanders, children and visitors away while operating a power tool.
Distractions can cause you to lose control. 
ELECTRICAL SAFETY
Do not abuse the cord. Never use the cord to carry the tool. Keep the cord...

When battery pack is not in use, keep it away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another. Shorting the battery termi-
nals together may cause sparks, burns or a fire.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained
tools with sharp cutting edge are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of...

Do not run the Cordless Circular Saw while carrying it at your side.A mov-
ing blade could cause serious personal injury.
Disconnect battery pack from tool and place the switch in the locked or
“OFF”  position before making any assembly adjustments, changing acces-
sories, performing any inspection, maintenance or cleaning procedures.Such
preventive safety measures reduce the risk of starting the tool accidentally
which could cause serious personal injury.
Be extra careful when cutting in high or...

9
FUNCTIONAL DESCRIPTION
Be aware that this tool is always in an operating condition
because it does not have to be plugged into an electrical outlet.Always turn
the switch “OFF”and remove the battery pack before changing bits.
CONTROLS AND 
COMPONENTS:
1. Battery Pack
2. Release Buttons 
on Each Side
3. 120V AC Adapter
4. Charger
5. LED Charging Indicators
6. Saw Shoe
7. Trigger Switch
8. Lock-Off Button
9. Rubber Grip
10
Support large panels to minimize the risk of blade pinching and KICKBACK. Large...

BATTERY
Before using battery pack, please read carefully all instruc-
tions and cautionarymarkings on battery pack, battery
charger and product using battery.
Do not incinerate the battery pack even if it is severely
damaged or is completely worn out.The battery pack can
explode. 
Do not carry battery packs in aprons, pockets, or tool boxes, product kit
boxes, drawers, etc. with loose metal objects.Battery pack terminals could
be short circuited causing damage to the battery pack, severe burns or fire....

CHARGING BATTERY PACK
CHARGE BATTERY PACK:
1. Make sure the trigger 
on the Cordless Circular
Saw is in the “OFF”
position and remove the
battery pack from the
Cordless Circular Saw.
2. Plug 120V AC Adapter 
into household outlet 
and into side of battery 
charger. Insert battery 
pack into battery charger. 
When the battery is
placed in the charger, the
red LED indicator light will remain on.
3. When fully charged, reattach battery pack onto Cordless Circular Saw, 
making certain latches fasten...

ATTACHING THE BLADE:
1. Remove the battery pack.
2. Retract the lower guard (see Fig. 1).
3. Slip the blade into place (see Fig. 2).
4. Put clamp washers and clamping 
screw loosely in position.
5. Use the wrench to tighten the 
clamping screw while pressing 
down on the clamping knob 
(see Fig. 3 and Fig. 4).
6. Remove wrench.
7. Replace the battery pack. 
ADJUSTING DEPTH AND ANGLE
ADJUST CUTTING DEPTH:
1. Remove the battery pack.
2. Hold the saw firmly and loosen the
depth adjustment knob by turning...

• Put on eye protection.
• Clear the saw of any foreign material.
• Make sure the work piece is held securely in place. Hold smaller pieces in a vise
or attach to the workbench with clamps.
• Mark out the line to be cut so it is easily visible.
• Check the lower guard for damage. If damaged, do not use tool.
• Always use the right blade for the material.
• Make sure all bolts, screws and locking levers are secure before starting tool.
• Pull the trigger to start the saw.
• Set the shoe against the work...