Alinco DJ-x2t/e Wide Band Communication Receiver Instruction Manual

21
2
Basic Operation
4Press the [PS (STEP/SKIP)] key.
Program scan starts. . (decimal point) flashes on the display, and PS
appears on the display.
Scanning pauses when receiving a signal.
TipThe tuning step and modulation mode of Program scan depends on the settings
in the VFO mode.
nMemory scan
This function scans the specified banks or all banks in the Memory mode.
There are three types of Memory scan.
Bank scan ·····································Scans a specified bank only.
Bank link scan...

2
Basic Operation
22
3Press the [SCAN (MODE)] key.
Bank scan starts, and . (decimal point) flashes on the display.
The DJ-X2 stops scanning when receiving a signal.
TipThe following are common to all the scans.
· Scanning direction depends on the direction of the last operation.(Except for
Program scan.)
· Scanning direction can be changed by pressing the [s / t] keys. 
· To stop scanning, press any key except the  [s / t]  and [MONI (SCRT)] keys.
· If you press the [MONI (SCRT)] key while scanning,...

23
2
Basic Operation
Bugging Detector
The DJ-X2 detects a bugging signal by scanning frequencies in the pro-
grammed memory banks. When a listening microphone is found, the DJ-X2
notifies you with its display.
Caution!Be sure to remove the earphone when detecting bugging.
1Hold down the [MONI (SCRT)] key, and turn the power ON. 
l will appear on the display, and the DJ-X2 starts scanning according to
the set memory bank link.
When a bugging signal is found, dC flashes on the display, and scanning
stops....

2
Basic Operation
24Cautions!
· Operate in a quiet environment where doors and windows are closed. It is
hard to find a listening microphone in a noisy environment.
· Depending on the modulation setting, this function may not work correctly.
· When the battery voltage is low, this function does not work normally. Be
sure to charge the internal lithium-ion battery completely, load new alka-
line batteries, or supply sufficient voltage from the DC power supply.
· Since this function detects a bugging...

25
2
Basic Operation
Resetting
You can reset the programmed memory channels and settings.
There are two types of reset.
Partial reset (PArt) ·························Programmed memory channels remain, and
other settings are reset.
All reset (ALL) ·······························All the memory channels and settings are
reset. (Preset channels cannot be reset.)
To reset:
1Hold down the [FUNC/ENTER] key, and turn the power ON.
CAnCEL  will appear on the display.
2Select a type of reset by pressing the [s /...

2
Basic Operation
26
Cloning
When using the clone function, all the settings of one DJ-X2 (master) can be
copied to another DJ-X2 (slave).
To operate the clone function:
1Turn OFF both DJ-X2s.
2Connect the earphone jacks on both master and slave DJ-X2s with the
cloning cable. 
3Hold down the [VOL/SQL (SET)] key of the master DJ-X2, and turn it ON.
CLonE will appear on the display.
4Turn the slave DJ-X2 ON.
WIDE BAND COMMUNICATION RECEIVER  DJ-X20.5  ~  1000MHz
700 MEMORY
CHANNELSRX FREQUENCYX2
V / P / M...

27
2
Basic Operation
5Press the [s] key of the master DJ-X2.
Cloning starts. SdØØØØ appears on the master DJ-X2s display, and
LdØØØØappears on the slave DJ-X2s display.
When cloning is completed, PASS appears on both DJ-X2s displays.
To return to normal operation, turn the power OFF, and then turn ON again.
Caution!· Do not disconnect the cable while cloning.
· Be advised that all data in the slave DJ-X2 will be updated if cloning is exe-
cuted.
· If you disconnect the cable or turn OFF the other...

2
Basic Operation
28
Battery Indication
When the battery is exhausted, the battery icon appears on the display.
If the icon appears, battery power will soon be depleted. 
Load new batteries or recharge the internal lithium-ion battery.
Appears. 

29
3
Operating in Expert Mode
The DJ-X2 has two operating profiles; Easy mode and Expert mode.
In Expert mode, the following functions are available:
Memory Function (P.30)
Setting the Antenna (P.33)
Selecting the Modulation Mode (P.34)
Setting the Tuning Step (P.35)
Memory Skip (P.36)
Descrambling (P.37)
Operational Settings (P.38)
This section explains how to use the additional functions in the Expert mode. 
Switching to Expert Mode
When shipped, the DJ-X2 is set to Easy Mode.
To switch to Expert...

3
Operating in Expert Mode
30Tip
The settings you change in Expert mode are valid even after returning to Easy
mode, however, they cannot be changed in Easy mode.
Memory Function
This function allows you to program the frequently used frequencies, and call
them up. A programmed frequency is called a channel.
The DJ-X2 has four types of memory functions; Memory bank channel, Program
channel, Search-pass memory channel, and Priority channel.
nTypes of Memory
Memory bank channel ····················The...