Alfa Router AIP-W610 User Manual

 
 
 
 
 
 
               AIP-W610 
 
Wireless 802.11b/g   AP/Router 
With Passive PoE support   
 
 
 
 
 
User’s Manual  

 FCC Certifications 
 
Federal Communication Commission Interference Statement 
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules.  These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation.    This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful...

 
CE Mark Warning 
 
This equipment complies with the requirements relating to 
electromagnetic compatibility, EN 55022 class B for ITE, the 
essential protection requirement  of Council Directive 89/336/EEC 
on the approximation of the laws of  the Member States relating to 
electromagnetic compatibility. 
 
Company has an on-going policy of upgrading its products and it 
may be possible that information in  this document is not up-to-date. 
Please check with your local distri butors for the latest...

 
Table of Contents 
 
Unpacking Information··················\
··················\
··················\
··················\
····· 1 
Introduction To Wireless Router··················\
··················\
··················\
········ 2 
General Description··················\
··················\
··················\
··················\
········· 2 
Key Features··················\
··················\
··················\
··················\
················· 3 
The Front Panel··················\...

LAN Interface Setup··················\
··················\
··················\
·············· 27 
WAN Interface Setup ··················\
··················\
··················\
············· 28 
Static IP Mode··················\
··················\
··················\
··················\
··················\
·· 28 
Firewall Configuration ··················\
··················\
··················\
··············· 33 
Port Filtering··················\
··················\
··················\...

 
Unpacking Information 
 
Thank you for purchasing the product. Before you start, please check all the contents 
of this package.     
 
The product package should include the following: 
 
 
 
1.  One Wireless VPN Router 
2.  One power adapter 
3.  One User Manual (CD) 
4.  One detachable antenna 
 
1 
 
  

Introduction To Wireless Router 
 
General Description 
 
The Wireless Router built-in with 4-port 10/100Mbps Fast Ethernet Switch 
is the latest generation of Wireless router product for Home/Office and SOHO 
users. This full-feature and self-contained compact Wireless Router will be fully 
for broadband access in both of LAN and Wireless environment. This device has 
been specifically designed to provi de LAN and Wireless users the most 
cost-effective method with mu ltiple accesses to the Internet at...

Key Features 
 
The switch provides the following key features: 
 
„  Complies with IEEE 802.11b/g wireless standards 
„  Provides one 802.11b/g wireless Reverse SMA detachable antenna 
„  High speed transfer data rate up to 54Mbps   
„  Supports turbo mode for 72Mbps data transfer 
„  Supports wireless data encryption with  64/128-bit WEP, WPA (TKIP with IEEE 
802.1x), WPA2 and AES functions 
„   Supports system log 
„  Supports authentication  for wireless connectivity based on ESSID 
„  Supports...

The Front Panel 
 
The front panel of the Wireless Router is shown below. 
  
  
System LEDs 
System LED indicators locate on the front panel for showing the operating 
status of the whole device. 
     
z  PWR (Power) LED 
This indicator lights green when the Wireless Router is receiving power; 
otherwise, it is off. 
 
z  Status LED 
The LED will be dark for a few seconds when the system is started. 
After that, the LED will blink periodically to show the Wireless Router 
is working normally. If the...

Port LEDs (LAN) 
Port LEDs (LAN) indicators locate on the front panel for showing the 
operating status of 10/100Mbps Fast Ethernet switching ports. 
 
z  Act/Link LED 
Every port has a Act/Link LED. Steady green (link state) indicates 
that the port has good linkage to its associated devices. Flashing 
green indicates that the port is receiving or transmitting data between 
its associated devices. 
 
 
The Rear Panel 
 
The rear panel of the Wireless Router is shown below 
 
 
 
Power Connection...