Home > Aleratec > DVD/CD Stand Alone Duplicator > Aleratec 17 DVDCD Copy Tower Duplicator User Guide

Aleratec 17 DVDCD Copy Tower Duplicator User Guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Aleratec 17 DVDCD Copy Tower Duplicator User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 78
    Add page 51 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com45
Using the DVD/CD Copy Tower
Main Menu
Setup – Eject All Trays
 E.		Eject	All	Trays
This function will eject all disc trays once DVD/CD Copy Tower system is 
booted up.  
  E1. Using the arrow buttons (or) select “Eject All Trays” then  
  press the OK button to select the setting, or  ESC to exit.
   
 
 
 
  E2. After pressing the OK button, the Eject All Trays setting will be  
  saved and you will return to the Setup menu.
[Eject On Start]
Eject All Trays
[Setup]
4. Eject On Start
    Add page 52 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com
46
Using the DVD/CD Copy Tower
Main Menu
Setup – Reader Speed
This function is used to adjust the reading speed of the Source drive.  The 
default setting of reader speed for CDs is 40x and DVDs is 24x.
1.  In the Setup menu, use the arrow buttons ( or) to select “Reader 
Speed”. The following screen will be displayed. 
 
2.  Press OK to select. Use the arrow buttons ( or) to scroll between 
the CD reading speed options. Press  OK  again to select your CD 
reader speed.  
 
 
 
 
3.  Next, you will set your DVD reader speed. Use the arrow buttons 
(or) to scroll between the DVD reading speed options. Press  OK  
again to select your DVD reader speed.  
 
 
 
 
4.  After setting the DVD reader speed, you will return to the Setup menu.
[Setup]
5. Reader Speed
[Reader Speed]
             CD  =  1
[Reader Speed]
         DVD  =  16
[Setup]
5. Reader Speed
    Add page 53 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com47
Using the DVD/CD Copy Tower
Main Menu
Setup – Compare Speed
This function allows you to adject the reading speed of drives to match up 
the reading speed of discs. The default setting of compare speed for CDs is 
40x and DVDs is 8x.
1. In the Setup menu, use the arrow buttons ( or) to select “Compare 
Speed”. The following screen will be displayed. 
 
2.  Press OK to select. Use the arrow buttons ( or) to scroll between 
the CD compare speed options. Press  OK again to select your CD 
compare speed.  
 
 
 
 
3.  Next, you will set your DVD compare speed. Use the arrow buttons 
(or) to scroll between the DVD compare speed options. Press  OK  
again to select your DVD compare speed.  
 
 
 
 
4.   After setting the DVD compare speed, you will return to the Setup menu.
[Setup]
6. Compare Speed
[Compare Speed]
              CD  =  12
[Compare Speed]
              DVD  =  8
[Setup]
6. Compare Speed
    Add page 54 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com
48
Using the DVD/CD Copy Tower
Main Menu
Setup – Language
This option allows you to select the language that is used for the display .  
1.  Use the arrow buttons (or) select “Language”. The following 
screen will be displayed. 
 
2. Press OK to display the current language selection (the default 
language is English).    
 
 
 
 
3.  Use the arrow buttons (or) to toggle through the available language 
options. To select your desired language, press the  OK button. After 
setting the language, you will return to the Setup menu. 
 
 
 
 
 
 
 
 
[Setup]
7. Language
7. Language
== >  English
[Setup]
7. Language
    Add page 55 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com49
Using the DVD/CD Copy Tower
Main Menu
Setup – Clear Setup
This option is used to reset all functions back to the manufacturers default 
settings. 
1. In the Setup menu, use the arrow buttons ( or) to select “Clear 
Setup”. The following screen will be displayed. 
 
2.  Press OK button again to clear all parameters, or press  ESC to exit.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3.   After pressing  OK, you will return to the Setup menu.
 
 
 
 
 
 
 
 
[Setup]
8. Clear Setup
Warning:
Clear Parameters to...
[Setup]
8. Clear Setup
Warning:
All Parameters...
    Add page 56 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com
50
Overview
Setup Menu
Advanced Setup
The setup menu’s “Advanced Setup” function has 10 subfunctions. These are:
8.9.1 Power On Time
8.9.2 Start-up Menu
8.9.3 Skip Read Error
8.9.4 Change Bad Master Disc
8.9 Advanced Setup
8.9.5 CD Overburn
8.9.6 Keep Buffer
8.9.7 Boot Password
8.9.8 Setup Password
8.9.9 Count Password
8.9.10 Eject Tray If no Disc
    Add page 57 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com51
Using the DVD/CD Copy Tower
Setup Menu
Advanced Setup – Power On Time
This function is used to set a warm-up time from 5 seconds to 99 seconds. 
1. In the Advanced Setup menu, use the arrow buttons ( or) to select 
“Power On Time”. The following screen will be displayed. 
 
 
2.  Press OK to select. Use the arrow buttons ( or) to scroll between 
number on seconds desired. Press OK again to select the desired 
number of seconds 
 
 
 
 
3.  You will now return to the Advanced Setup menu.  
[Advanced Setup]  
1. Power On Time
[Power On Time] 
           5 Seconds
[Advanced Setup]  
1. Power On Time
    Add page 58 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com
52
Using the DVD/CD Copy Tower
Setup Menu
Advanced Setup – Startup Menu
This function selects the menu item that will be the first item shown on the 
display when you turn on the duplicator. The default setting is Copy. 
1.  In the Advanced Setup menu, use the arrow buttons ( or) to select 
“Startup Menu”. The following screen will be displayed. 
 
 
2.  Press OK to select. Use the arrow buttons ( or) to scroll between 
available functions. Press  OK again to select the desired startup menu 
option. 
 
 
 
 
3.  You will now return to the Advanced Setup menu.  
[Advanced Setup]  
2. Start-up Menu
[Start-up Menu]
1. Copy
[Advanced Setup]  
2. Start-up Menu
    Add page 59 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com53
Using the DVD/CD Copy Tower
Setup Menu
Advanced Setup – Skip Reader Error
You can set error skipping function while reading discs with errors. The 
default setting is YES. If an error is detected during source loading, the 
duplicator will stop loading and display the error message. If the setting is 
NO, there will be no message shown even if there is an error in reading. 
You can use this function to copy some DVDs with errors. 
1.  In the Advanced Setup menu, use the arrow buttons ( or) to select 
“Skip Reader Error”. The following screen will be displayed. 
 
 
2.  Press OK to select. Use the arrow buttons ( or) to scroll between 
the YES and NO options. Press OK again to select the desired option.
 
 
 
 
3.  You will now return to the Advanced Setup menu.
[Advanced Setup]  
3. Skip ReadError
[Skip ReadError]
           YES
[Advanced Setup]  
3. Skip ReadError
    Add page 60 to Favourites
    image text
    Enable zoom 
    							www.aleratec.com
54
Using the DVD/CD Copy Tower
Setup Menu
Advanced Setup – Change Bad Master Disc
This function allows the system eject the source disc and ask for another 
one, if the source disc is unreadable by the system. 
1.  In the Advanced Setup menu, use the arrow buttons ( or) to select 
“Change Bad Master”. The following screen will be displayed. 
 
 
2.  Press OK to select. Use the arrow buttons ( or) to scroll between 
the ENABLE and DISABLE  options. Press OK again to select the 
desired option.  
 
 
 
 
3.  You will now return to the Advanced Setup menu.  
[Advanced Setup]  
4. Change Bad Master
[Change Bad Master]
             Enable
[Advanced Setup]  
4. Change Bad Master
    All Aleratec manuals Comments (0)