Aleratec 15 HDD Copy Cruiser IDE SATA Hard Disk Duplicator User Guide

www.aleratec.com25
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
The “Setup” menu contains configuration options for the 1:5 HDD Cruiser. It is 
suggested to use the factory defaults for optimum performance. 
1. Use the arrow buttons (or) to select “Setup”. Press ENT to select. The 
following screen will be displayed. 
Note: After changing any of the configuration options, you must 
press ENT to accept the change. Once all changes are complete, 
press ESC to exit the Setup menu. The...

www.aleratec.com26
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Language
This option allows you to select the language that is used for the display. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2. Use the arrow buttons () to scroll to “Language”. The following 
screen will be displayed. 
3. Press ENT to display the current language selection (the default language 
is English). 
4. Use the arrow buttons () to toggle through the available...

www.aleratec.com27
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Copy	Size
This function is used to specify the amount of source disk data to copy to the 
target drives. 
1. Use the arrow buttons (or) select “Setup”, then press ENT. The 
following screen will be displayed. 
2. Use the arrow buttons () to scroll to “Copy Size”. The following 
screen will be displayed. 
3. Press ENT to display the current configuration setting. 
4. Use the arrow buttons () to toggle through the...

www.aleratec.com28
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Startup	Menu
This option lets you select any of the functions (except “Setup”) as the initial 
function that appears when the 1:5 HDD Cruiser is powered on.   
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2. Use the arrow buttons () to toggle between the subfunctions. Press 
ENT to select “Startup Menu”. The following screen will be displayed. 
3. Press ENT to display the...

www.aleratec.com29
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Auto	Compare
This option allows you to choose whether or not to automatically compare the 
source and target hard drives after every copy operation. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2. Use the arrow buttons () to scroll to “Auto Compare”. The following 
screen will be displayed. 
3. Press ENT to display he current configuration setting. The default setting 
is...

www.aleratec.com30
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Button	Sound
This option allows you to enable or disable the beeping sound heard when you 
press a button. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2. Use the arrow buttons () to scroll to “Button Sound”. The following 
screen will be displayed. 
3. Press ENT to display the current configuration setting. The default is “On”. 
4. Use the arrow buttons () to toggle...

www.aleratec.com31
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Device	Info
This option displays information about any hard drives connected to the 1:5 
HDD Copy Cruiser IDE/SATA. 
1. Use the arrow buttons (or) to scroll to “Setup”. The following screen 
will be displayed. 
2. Use the arrow buttons () to scroll to “Device Info”. The following 
screen will be displayed. 
3. Press ENT to display information about the first device.
4. Use the arrow buttons (or) to show information...

www.aleratec.com32
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	System	Info
This function displays information about the 1:5 HDD Cruiser, including the 
current firmware version. 
1. Use the arrow buttons (or) to select “Setup”. The following screen 
will be displayed. 
2. After selecting “Setup” use the arrow keys () to toggle between 
the subfunctions. Press ENT to select. “System Info”. The following 
information will be displayed. 
3. Press ENT to display system information....

www.aleratec.com33
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Fast	Copy
The “Fast Copy” option allows you to choose whether to copy the entire source 
hard disk, or only the used space. 
1. Use the arrow buttons (or) to select “Setup”. The following screen 
will be displayed. 
2. Press the arrow buttons () to scroll to “Fast Copy”. The following 
screen will be displayed. 
3. Press ENT to display the current configuration setting. The default is “On” 
(only used space will be...

www.aleratec.com34
Using the 1:5 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Auto	Start	Drive	-	(Not Supported)
Setup:	Auto	Start	 Timer	-	(Not Supported)
Setup:	 Tolerance	Size
This function is to set the HDD capacity tolerance between the source and 
target. 
1. Use the arrow buttons (or) to select “Setup”. The following screen 
will be displayed. 
2. Press the arrow buttons () to scroll to “Tolerance Size”. The following 
screen will be displayed. 
3. Press ENT to display the current...