Aleratec 15 HDD Copy Cruiser IDE SATA Hard Disk Duplicator User Guide
Have a look at the manual Aleratec 15 HDD Copy Cruiser IDE SATA Hard Disk Duplicator User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
www.aleratec.com25 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup The “Setup” menu contains configuration options for the 1:5 HDD Cruiser. It is suggested to use the factory defaults for optimum performance. 1. Use the arrow buttons (or) to select “Setup”. Press ENT to select. The following screen will be displayed. Note: After changing any of the configuration options, you must press ENT to accept the change. Once all changes are complete, press ESC to exit the Setup menu. The following screen will be displayed. 2. When the configuration changes have been saved, the following screen will be shown. ENTESC 10. Setup ENTESC Saving config...Please Wait... ENTESC 10. Setup
www.aleratec.com26 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup Setup: Language This option allows you to select the language that is used for the display. 1. Use the arrow buttons (or) select “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Language”. The following screen will be displayed. 3. Press ENT to display the current language selection (the default language is English). 4. Use the arrow buttons () to toggle through the available options. Once you change a configuration option, remember to press ENT to save it. ENTESC 10-01. SetupLanguage ENTESC LanguageEnglish ENTESC 10. Setup
www.aleratec.com27 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup Setup: Copy Size This function is used to specify the amount of source disk data to copy to the target drives. 1. Use the arrow buttons (or) select “Setup”, then press ENT. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Copy Size”. The following screen will be displayed. 3. Press ENT to display the current configuration setting. 4. Use the arrow buttons () to toggle through the available copy sizes (1% - 100%). Once you change a setting, remember to press ENT to save it. ENTESC 10-02. SetupCopy Size ENTESC 10. SetupALL ENTESC Copy Size1% - 100% (MB)age ENTESC 10. Setup
www.aleratec.com28 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup Setup: Startup Menu This option lets you select any of the functions (except “Setup”) as the initial function that appears when the 1:5 HDD Cruiser is powered on. 1. Use the arrow buttons (or) select “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to toggle between the subfunctions. Press ENT to select “Startup Menu”. The following screen will be displayed. 3. Press ENT to display the current configuration setting. The default setting is “1. Copy HDD”. 4. Use the arrow buttons () to toggle through the available options. Once you change a setting, remember to press ENT to save it. ENTESC 10. Setup ENTESC 10-03. SetupStartup Menu ENTESC Startup Menu1. Copy HDD
www.aleratec.com29 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup Setup: Auto Compare This option allows you to choose whether or not to automatically compare the source and target hard drives after every copy operation. 1. Use the arrow buttons (or) select “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Auto Compare”. The following screen will be displayed. 3. Press ENT to display he current configuration setting. The default setting is “Off”. 4. Use the arrow buttons () to modify the setting. After you change a setting, remember to press ENT to save it. ENTESC 10. Setup ENTESC 10-04. SetupAuto Compare ENTESC Auto CompareOff
www.aleratec.com30 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup Setup: Button Sound This option allows you to enable or disable the beeping sound heard when you press a button. 1. Use the arrow buttons (or) select “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Button Sound”. The following screen will be displayed. 3. Press ENT to display the current configuration setting. The default is “On”. 4. Use the arrow buttons () to toggle through the available options. Once you change a default, remember to press ENT to save it. ENTESC 10. Setup ENTESC 10-05. SetupButton Sound ENTESC Button SoundOn
www.aleratec.com31 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup Setup: Device Info This option displays information about any hard drives connected to the 1:5 HDD Copy Cruiser IDE/SATA. 1. Use the arrow buttons (or) to scroll to “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Device Info”. The following screen will be displayed. 3. Press ENT to display information about the first device. 4. Use the arrow buttons (or) to show information about any additional hard drive that is connected. The following screen will be displayed. ENTESC 10. Setup ENTESC 10-06. SetupDevice Info ENTESC 0 Source CH: 0Hitachi 149.1GB ENTESC 1 Target CH: 1Hitachi 149.1GB
www.aleratec.com32 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup Setup: System Info This function displays information about the 1:5 HDD Cruiser, including the current firmware version. 1. Use the arrow buttons (or) to select “Setup”. The following screen will be displayed. 2. After selecting “Setup” use the arrow keys () to toggle between the subfunctions. Press ENT to select. “System Info”. The following information will be displayed. 3. Press ENT to display system information. ENTESC 10. Setup ENTESC 10-07. SetupSystem Info ENTESC 2055PF ver:A.24Q
www.aleratec.com33 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup Setup: Fast Copy The “Fast Copy” option allows you to choose whether to copy the entire source hard disk, or only the used space. 1. Use the arrow buttons (or) to select “Setup”. The following screen will be displayed. 2. Press the arrow buttons () to scroll to “Fast Copy”. The following screen will be displayed. 3. Press ENT to display the current configuration setting. The default is “On” (only used space will be copied). 4. Use the arrow buttons () to toggle between “On” and “Off”. Once you change a default, remember to press ENT to save it. ENTESC 10. Setup ENTESC 10-08. SetupFast Copy ENTESC Fast CopyOn
www.aleratec.com34 Using the 1:5 HDD Copy Cruiser IDE/SATA Main Menu Setup Setup: Auto Start Drive - (Not Supported) Setup: Auto Start Timer - (Not Supported) Setup: Tolerance Size This function is to set the HDD capacity tolerance between the source and target. 1. Use the arrow buttons (or) to select “Setup”. The following screen will be displayed. 2. Press the arrow buttons () to scroll to “Tolerance Size”. The following screen will be displayed. 3. Press ENT to display the current configuration setting. (Off or 1 - 100%) 4. Use the arrow buttons () to change the setting. Once you change a default, remember to press ENT to save it. ENTESC 10. Setup ENTESC 10-11. SetupTolerance Size ENTESC Tolerance SizeOff