Aleratec 15 HDD Copy Cruiser HighSpeed WL User Guide

							www.aleratec.com45
Stand-Alone D\fplicat\Bor SA: T\ftorials
8. Press ENT button to continue. Your old Master Disc will be ejected and you can 
insert another audio CD into the Reading Tray. To continue, go back to Step 3.
9. If you choose to finalize it, press the DOWN arrow button until you see the 
following display:
Press the ENT button to continue. You will see following confirmation display:
Press the ENT	button again to confirm the finalization. During the finalization 
process, you will see following progress indicator:
OR
When the whole process completes, your mixed copy will be ejected and you 
will see the following display:
You will then be directed back to the main menu:
Total 6 Trk 26m : 17sFinish Editing?      >COPYUSBPRINTSOURCE
ESCENT


Total 6 Trk 26m : 17sConfirm to Finalize?COPYUSBPRINTSOURCE
ESCENT


Processing to Disc..\B. 10%COPYUSBPRINTSOURCE
ESCENT


Finalizing...Please WaitCOPYUSBPRINTSOURCE
ESCENT


Job Completed!Press OK to FinishCOPYUSBPRINTSOURCE
ESCENT


Aleratec  1.0013. Mix A\fdio TracksCOPYUSBPRINTSOURCE
ESCENT

                          
						

							www.aleratec.com46
Stand-Alone D\fplicat\Bor SA: T\ftorials
A\fdio CD Editing - continued
Example of Mixing Audio Track\b to the \fard Dr\bive  
In this example we will be creating a new Audio CD from 2 different discs: 
 ▪CD1: song 2, and song 4
 ▪CD2: song 3, song 4 and song 5
1. Go to function 13 “Mix Audio Tracks”.
2. Press ENT button.
3. Use the UP or DOWN arrow button to select “Hard Drive”. Press ENT button to 
continue.
4. Insert CD1 into the 1st Drive and a blank CD into the 2nd Drive.
5. Wait until the following screen appears.
6. Use the UP or DOWN arrow button until you see “Track 2” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 2”. You will see the following display:
7. Use the UP or DOWN arrow button until you see “Track 4” on the 2nd line, 
and then press ENT to confirm. A “*” symbol will appear on the left of “Track 
4” like following:
Aleratec 1.0013. Mix A\fdio TracksCOPYUSBPRINTSOURCE
ESCENT


Total:  0  Trk 0m :  0sTrack  1: 4m  :03sCOPYUSBPRINTSOURCE
ESCENT


Total:  1  Trk  4m :  49s*Track  2: 4m  :49sCOPYUSBPRINTSOURCE
ESCENT


Total:  2  Trk  9m :  47s*Track  4: 4m  :58sCOPYUSBPRINTSOURCE
ESCENT

                  
						

							www.aleratec.com47
Stand-Alone D\fplicat\Bor SA: T\ftorials
8. Use the UP or DOWN arrow button until you see following display:
9. Press ENT to submit your selection. You will see the following display:
10. Once the loading process is complete, you will see the following display:
11. To continue with your music selections, press the DOWN button once and you 
will see following display:
12. Press ENT button to continue. Insert CD2 into the Reader Tray. When CD2 is 
recognized you will see the following display.
13. Use the UP or DOWN arrow button until you see “Track 3” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 3”. You will see the following display:
Total:  2  Trk 9m :  47sAre yo\f done?COPYUSBPRINTSOURCE
ESCENT


A\fto Editing...  3 4m : 58sCOPYUSBPRINTSOURCE
ESCENT


Total:  2  Trk 9m :  47sFinish Editing?    >COPYUSBPRINTSOURCE
ESCENT


Total:  2  Trk 9m :  47sInsert Next Master\B?COPYUSBPRINTSOURCE
ESCENT


Total:  2  Trk 9m :  47sTrack  1:  4m : 03s\BCOPYUSBPRINTSOURCE
ESCENT


Total:  3  Trk 14m :  35s*Track  3:  4m : 47s\BCOPYUSBPRINTSOURCE
ESCENT

                          
						

							www.aleratec.com48
Stand-Alone D\fplicat\Bor SA: T\ftorials
A\fdio CD Editing - continued
14. Use the UP or DOWN arrow button until you see “Track 4” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 4”. You will see the following display:
15. Use the UP or DOWN arrow button until you see “Track 5” on the 2nd line 
of the display. Press ENT to confirm. A “*” symbol will appear on the left of 
“Track 5”. You will see the following display:
16. Use the UP or DOWN arrow button until you see following:
17. Press ENT to submit your selection. You will see the following display:
18. Once the loading process to the hard drive is complete, you will see following 
display:
19. When you have finished selecting all of our tracks, press the ENT button to 
finalize. You will see the following display:
Total:  4  Trk 20m :  01s*Track  4:  5m : 26s\BCOPYUSBPRINTSOURCE
ESCENT


Total:  5  Trk 24m :  29s*Track  5:  4m : 27s\BCOPYUSBPRINTSOURCE
ESCENT


Total:  5  Trk 24m :  29sAre yo\f done?COPYUSBPRINTSOURCE
ESCENT


A\fto Editing...  3  4m : 47sCOPYUSBPRINTSOURCE
ESCENT


Total:  5  Trk  24m :  29sFinish Editing?    >COPYUSBPRINTSOURCE
ESCENT


Total:  5  Trk 24m :  29sConfirm to Finalize?COPYUSBPRINTSOURCE
ESCENT

                          
						

							www.aleratec.com49
Stand-Alone D\fplicat\Bor SA: T\ftorials
20. Press the ENT button again to confirm. You will see the following display:
21. When the process is complete, your mixed copy will be ejected. You will see 
the following display:
You will then be directed back to the main menu:
Processing to Disc..\B.  10%COPYUSBPRINTSOURCE
ESCENT


Job Completed!Press OK to FinishCOPYUSBPRINTSOURCE
ESCENT


  1.0013. Mix A\fdio TracksCOPYUSBPRINTSOURCE
ESCENT

              
						

							www.aleratec.com50
Stand-Alone D\fplicat\Bor SA: T\ftorials
Introd\fction to Manag\Be Acco\fnts 
The “Manage Accounts” feature allows the administrator to:
• Create user accounts and passwords to prevent unauthorized use of the 
duplicator.
• View existing user account lists.
• Edit existing user account information, including name and password.
• Delete existing user account(s).
• Enable/Disable the Manage Accounts feature.
The “Manage Accounts” feature is disabled by default. Prior to activating this 
feature, the duplicator recognizes all users as the only activated user defined as the 
administrator. The pre-defined password for this function is “0000”.
With this feature enabled additional users will have their own settings and have 
access only to the hard drive partitions they have loaded. No one else will have the 
permission to access these settings/partitions other than the Administrator.
For example, if USER1 logged-in and loaded a Master Disc to the hard drive 
partition (Partition A), and USER2 logs-in, USER2 will not have access to any 
partition loaded by USER1, which includes partition A.
To take advantage of this feature, use the following instructions:
1. Change the Administrator password. Please refer to Feature Overview “3. Edit 
User Info” on page 54 of this User Guide for more information.
2. Create a User Name and Password for every authorized person on this 
duplicator. Please refer to Feature Overview “2. Create User” on page 54 of this 
User Guide for more information.
3. Enable the “Manage Accounts” feature by turning on the “Password on Boot 
UP” setting. Please refer to “Password on Bootup” on page 55 of this User 
Guide for more information.
Note: Thi\b duplicator come\b\b with \btandard lice\bn\be which allow\b you\b to 
create up to 32 u\be\br\b.   
						

							www.aleratec.com51
Stand-Alone D\fplicat\Bor SA: T\ftorials
Manage Acco\fnts: Overview
To access the “Manage Accounts” feature, perform the following steps:
1. Turn on the duplicator. After the bootup is complete, you will see the following 
display:
2. Press the UP or DOWN button consecutively until you see following:
3. Press ENT. You will be asked for the Administrator’s Password.
By default, the Administrator’s Password is “0000”. To enter that, press UP 
or DOWN button to select the first digit of your password and press the ENT 
button to submit the current digit. You will be guided to select the next digit. 
Repeat above steps until you’ve selected all digits of your password. After you 
have entered the password, press the ENT button to submit your password.
4. Once your password is validated, you will be guided to “Manage Accounts”. 
You will see the following display:
There are five menus in “Manage Accounts”: 
View User
Create User
Edit User Info
Delete User
Password on Bootup
1
2
3
4
5
Aleratec 1.001. COPYCOPYUSBPRINTSOURCE
ESCENT


Aleratec 1.0016. Manage Acco\fntsCOPYUSBPRINTSOURCE
ESCENT


Enter Admin’s PWD[XXXX] OKCOPYUSBPRINTSOURCE
ESCENT


Manage Acco\fnts1. \biew UserCOPYUSBPRINTSOURCE
ESCENT

                  
						

							www.aleratec.com52
Stand-Alone D\fplicat\Bor SA: T\ftorials
Manage Acco\fnts Feat\fre Ove\Brview - continued
View U\ber
This menu allows you to view current existing user accounts.
1. Press the ENT button to enter into this menu. Press the ESC button to go back 
to the main menu or cancel the current selection.
Note: U\ber “Admin” i\b the\b admini\btrative acco\bunt. It will alway\b\b be there.
Create U\ber
This menu allows you to create additional user accounts. Each user has their own 
settings and hard drive partitions. During this process, you will be prompted to enter 
a new user name and user password for a new account.
1. Press the ENT button to enter into this menu. Press the ESC button to go back 
to the main menu or cancel the current selection.
Note: U\ber name can con\b\bi\bt\b of maximum 8 al\bphanumeric letter\b \bor 
number\b.
Note: U\ber pa\b\bword will c\bon\bi\bt of 4 number\b.
Edit U\ber Info
This menu allows you to change an existing user account’s name and password. You 
will be asked to select an existing user account and then enter a new user name and 
new user password.
1. Press the ENT button to enter into this menu. Press the ESC button to go back 
to the main menu or cancel the current selection.
Manage Acco\fnts1. \biew UserCOPYUSBPRINTSOURCE
ESCENT


Manage Acco\fnts2. Create UserCOPYUSBPRINTSOURCE
ESCENT


Manage Acco\fnts3. Edit User InfoCOPYUSBPRINTSOURCE
ESCENT

              
						

							www.aleratec.com53
Stand-Alone D\fplicat\Bor SA: T\ftorials
Note: U\ber “Admin” i\b the \badmini\btrative accou\bnt, you can NOT change 
the u\ber name for t\bhi\b account, but you\b will be able to cha\bnge the 
pa\b\bword for thi\b ac\bcount.
Note: U\ber name con\bi\bt\b o\bf maximum 8 alphanu\bmeric letter\b or 
number\b.
Note: U\ber pa\b\bword will \bcon\bi\bt of 4 number\b.\b 
Delete U\ber
This menu allows you to delete an existing user account. You will be asked to select 
and existing user account to be removed.
1. Press the ENT button to enter into this menu. Press the ESC button to go back 
to the main menu or cancel the current selection.
Note: U\ber “Admin” i\b the \badmini\btrative accou\bnt; you can NOT delete 
thi\b account.
Pa\b\bword on Bootup
This menu allows you to enable/disable the “Manage Accounts” feature upon boot 
up. During this process, you will be asked to select ON or OFF (enable/disable).
1. Press ENT button to enter into this menu. Press the ESC button to go back to 
the main menu or cancel the current selection.
Manage Acco\fnts4. Delete UserCOPYUSBPRINTSOURCE
ESCENT


Manage Acco\fnts5. Password on Boot\fpCOPYUSBPRINTSOURCE
ESCENT

          
						

							www.aleratec.com54
Stand-Alone D\fplicat\Bor SA: T\ftorials
Introd\fction to D\fplic\Bation Mode
This feature reduces the “Duplication from Hard Drive” process to a single step.
There are three features under “Duplication mode”:
1. On the Fly
2. Load and Copy
3. Prompt
On the Fly
This mode instructs the duplicator to copy directly from the Master Disc. The 
duplicator performs simultaneous read and write operations without any delays.
Advantage:
 ▪Ideal for small quantity quick duplication.
Disadvantage:
 ▪Requires a Master Disc for each and every run. (Could be harmful for the 
Master Disc.)
 ▪Maximum DVD duplication speed is typically limited under 8x.
 ▪Requires the Master Disc to be in excellent condition for error free duplication.
Load and Copy
This mode instructs the duplicator to load your Master Disc into the built-in hard 
drive partition called “Reserved” and make the requested quantity of copies directly 
from the hard drive. The content will remain stored in the “Reserved” partition, 
available for future duplications of the same project until you perform this function 
again with a new master or manually rename or delete the content from Hard Drive 
Setup. Once a new master is used for Load and Copy, the “Reserved” partition will 
be overridden or one will be created if it didn’t exist.
Advantage:
 ▪Faster duplication in a long run. (Un-Restricted DVD Duplication speed 
supported by the duplication blank media.)
 ▪Stable duplication.
 ▪Reliable duplication.
Prompt
If you set to “Prompt”, when you go to 1. Copy, you will be asked if you want to do 
“Load and Copy” or “on the Fly”. If you set Duplication Mode to “Load and Copy” or 
“On the Fly”, you will not be prompted when you go to 1. Copy. The duplicator will do 
what you have selected in Duplication Mode.