Aleratec 13 DVD CD RoboRacer MultiDrive SA Duplicator User Guide

www.aleratec.com25
Using the DVD/CD Duplicator
Main Menu: Setup - continued
Test	Mode	Set
In test mode the duplicator will simulate burning but will not actually write 
data to the disc.
1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” 
function. 
2. Press ENTER (ENT) key to enter the subfunction menu.
3. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Test 
Mode Set”. 
4. Press the ENTER (ENT) key to navigate to the first option “Copy*”.
5. Press the LEFT/RIGHT arrow keys (...

www.aleratec.com26
Using the DVD/CD Duplicator
Main Menu: Setup - continued
Format	Hard	Disk
1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” 
function. 
2. Press ENTER (ENT) key to enter the subfunction menu.
3. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Format 
hard disc”.  
 
 
 
4. Press the ENTER (ENT) key to format the hard disc.
5. Use the ESCAPE (ESC) key to return to the Main Menu.
 
 
 
Setup
Setup
Format hard disc
Format hard disc
Formatting  

www.aleratec.com27
Using the DVD/CD Duplicator
Main Menu: Setup - continued
Default	Reload
Selecting “Yes” will return all settings to the factory default.
1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” 
function. 
2. Press ENTER (ENT) key to enter the subfunction menu.
3. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Default 
Reload”. 
4. Press the ENTER (ENT) key to navigate to the first option “No*”.
5. Press the LEFT/RIGHT arrow keys ( ) to navigate to the second...

www.aleratec.com28
Using the DVD/CD Duplicator
Main Menu: Setup - continued
DVD	Burn	Speed
The “DVD burn speed” function allows adjustment of burn speed to 
increase yield and quality of copies. 
1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” 
function. 
2. Press ENTER (ENT) key to enter the subfunction menu.
3. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “DVD 
burn speed”. 
4. Press the ENTER (ENT) key to navigate to the first option 
“Maximum*”.
5. Press the LEFT/RIGHT...

www.aleratec.com29
Using the DVD/CD Duplicator
Main Menu: Setup - continued
CD	Burn	Speed
The “CD burn speed” function allows adjustment of burn speed to increase 
yield and quality of copies. 
1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” 
function. 
2. Press ENTER (ENT) key to enter the subfunction menu.
3. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “CD 
burn speed”. 
4. Press the ENTER (ENT) key to navigate to the first option 
“Maximum*”.
5. Press the LEFT/RIGHT...

www.aleratec.com30
Using the DVD/CD Duplicator
Main Menu: Setup - continued
Auto	Verify
The “Auto Verify” function will test a disc for its readability in a ROM 
drive. This is not the same as “Compare”. Enabling “Auto Verify” will 
perform “Verify” on all disc copies loaded in the input bin.
1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” 
function. 
2. Press ENTER (ENT) key to enter the subfunction menu.
3. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Auto 
Verify”. 
4....

www.aleratec.com31
Using the DVD/CD Duplicator
Main Menu: Setup - continued 
Read	Error	Skip
If the source disc is damaged or of poor quality, enabling this function may 
allow making a useable copy. With Read error skip disable, burning will 
continue even if errors are detected. When enabled, the duplicator will stop 
if errors are detected. 
1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” 
function. 
2. Press ENTER (ENT) key to enter the subfunction menu.
3. Press the LEFT/RIGHT...

www.aleratec.com32
Using the DVD/CD Duplicator
Main Menu: Setup - continued
Over	Burn	Mode
When enabled, this function will burn data to a normally unused area along 
the outer diameter of the disc. This feature can increase the disc capacity by a 
small amount. 
1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” 
function. 
2. Press ENTER (ENT) key to enter the subfunction menu “Over burn 
Mode”. 
3. Press the ENTER (ENT) key to navigate to the first option “Disable”.
4. Press the...

www.aleratec.com33
Using the DVD/CD Duplicator
Nero Essentials Installation
1. Insert the Nero 7 Essentials CD into your PC. If Autoplay is enabled on 
your computer, you will automatically be taken to the Nero Essentials 
installer menu.
If Autoplay is not enabled, navigate to your PC’s optical disc drive in 
My Computer, and either double-click the drive to explore the CD and 
run Setup.exe, or right click on the drive icon and click “Autoplay”.
2. In the Nero Essentials installer menu, click on...

www.aleratec.com34
Using the DVD/CD Duplicator
Creating an Image with Nero
1. Start the Nero Express Essentials program.
2. The screen below will be displayed. 
For this example choose “Data” and “Data CD”.
