Aleratec 13 DVD CD RoboRacer MultiDrive SA Duplicator User Guide

USER GUIDE
Aleratec
1:3 DVD/CD RoboRacer 
    MultiDrive SA™
Part No. 280118, 280118EU
\037  

www.aleratec.com
Copyright/Model Identification
The content of this manual is for informational purposes only and is subject 
to change without notice. 
This manual is copyright with all rights reserved. Under copyright laws, this 
manual and the software described within may not be copied, except in the 
normal use of the product(s) described within or to make a backup copy.
Copyright© 2013 
Aleratec, Inc.
9851 Owensmouth Avenue
Chatsworth, CA 91311 U.S.A.
www.aleratec.com
Aleratec is a registered...

www.aleratec.com
Radio/TV Interference Statement
The equipment described in this guide emits radio frequency energy. If it 
is not installed in accordance with the manufacturer’s instructions, it may 
cause interference with radio or television reception.
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential...

www.aleratec.com
Safety Regulations
WARNING
To prevent fire or shock hazard, do not expose the 
unit to rain or moisture.
To avoid electrical shock, do not open the 
cabinet. Refer servicing to authorized personnel 
only.
CAUTION
As the laser beam in these DVD/CD Duplicators 
is harmful to the eyes, do not  attempt to 
disassemble the cabinet. Refer servicing to 
authorized personnel only.
The use of optical instruments with this product 
will increase eye hazard.
This DVD/CD Duplicator is classified as...

www.aleratec.com
Table of Contents
Introduction ..........................................................................................1
Included Items  ............................................................................................1
Key Items – 1:3 DVD/CD RoboRacer MultiDrive SA ..............................2
1:3 DVD/CD RoboRacer MultiDrive SA Display Panel  ...........................3
Precautions...

www.aleratec.com 
\037  

www.aleratec.com1
Introduction
Thank you for purchasing this 1:3 DVD/CD RoboRacer MultiDrive SA. 
Please read this User Guide thoroughly before using this product.
• Page 2 shows the Key Features of the 1:3 DVD/CD RoboRacer 
MultiDrive SA
• Page 3 shows the Duplicator LCD Display Panel.
Included Items
• 1 1:3 DVD/CD RoboRacer MultiDrive SA
• 1 Disc Output Bin Holder
• 1 Side Disc Output Bin Holder
• 1 150-Disc Capacity Disc Output Bin
• 1 50-Disc Capacity Disc Output Bin
• 4 150-Disc Capacity Guide Rods...

www.aleratec.com2
Introduction
Key Items – 1:3 DVD/CD RoboRacer MultiDrive SA
1
5
8A
B
1.	Clear	Plastic	Disc	Guide	Rods
2.	LCD	Display	Panel
3.	Control	Panel
4.	Disc	Burning	Drives
5.	Disc	Input	Bin
6.	Protective	Cover
7.	Disc	Bin	Holder
8.	Disc	Output	Bin
A.	Power	Plug
B.	High	Performance	Cooling	Fan
C.	USB
7
2
3
6
4
C  

www.aleratec.com3
Introduction
1:3 DVD/CD RoboRacer MultiDrive SA Display Panel
1 Display shows all functions and messages
2 Power Indicator - this LED also doubles as an activity LED and 
changes colors when a disc is being burned etc. 
3 LEFT Scroll Button
4 RIGHT Scroll Button
5  ENTER Button
The left and right scroll buttons are used to navigate through the 
operating menu, while the enter and escape buttons are used to select or 
cancel menu settings.  
6 ESCAPE Button
32
Disc Duplicate
4
56
1
ENTESC  

www.aleratec.com4
Precautions
Before installing your 1:3 DVD/CD RoboRacer MultiDrive SA, please read 
the following.
Installation
Avoid placing the 1:3 DVD/CD RoboRacer MultiDrive SA in a location 
subject to:
• High humidity
• High temperature
• Excessive dust
• Mechanical vibration
• Direct sunlight
• Electromagnetic radiation
Operation
Do not move the 1:3 DVD/CD RoboRacer MultiDrive SA during operation. 
This may cause it to malfunction during operations.
Note:	Choose	a	Good	Location
1.	Allow	adequate...