Home
>
Aleratec
>
DVD/CD Robotic Duplicator
>
Aleratec 13 DVD CD RoboRacer MultiDrive SA Duplicator User Guide
Aleratec 13 DVD CD RoboRacer MultiDrive SA Duplicator User Guide
Have a look at the manual Aleratec 13 DVD CD RoboRacer MultiDrive SA Duplicator User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
USER GUIDE
Aleratec
1:3 DVD/CD RoboRacer
MultiDrive SA™
Part No. 280118, 280118EU
\037
www.aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice. This manual is copyright with all rights reserved. Under copyright laws, this manual and the software described within may not be copied, except in the normal use of the product(s) described within or to make a backup copy. Copyright© 2013 Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. www.aleratec.com Aleratec is a registered trademark and 1:3 DVD/CD RoboRacer MultiDrive SA™ is a trademark of Aleratec, Inc. Check out Aleratec Online! • Blog.Aleratec.com • Facebook.com/Aleratec • Twitter.com/Aleratec • YouTube.com/Aleratec Please record the following information to help expedite any warranty claim: Model No. _____________________Serial No. _____________________ Date Purchased ________________________________________________ Place of Purchase ______________________________________________ The Aleratec 1:3 DVD/CD RoboRacer MultiDrive SA is used only to back up personal data and to edit personal audio tracks. The copyright of the duplicated disc made from the 1:3 DVD/CD RoboRacer MultiDrive SA is belonged to the author or company of the source disc. Any unauthorized copying, or editing of a copyright disk, in full or part is strictly prohibited.
www.aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy. If it is not installed in accordance with the manufacturer’s instructions, it may cause interference with radio or television reception. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency ener gy. If not installed and used in accordance with the instruction manual, this equipment may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be verified by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an electrical outlet on a circuit that is different from the circuit to which the receiver is connected. • Consult your dealer or an experienced radio/TV technician for help. This equipment has been certified to comply with the limits for a Class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and/or modifications made to this equipment, without the approval of manufacturer, could void the user’s authority to operate this equipment.
www.aleratec.com Safety Regulations WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to authorized personnel only. CAUTION As the laser beam in these DVD/CD Duplicators is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to authorized personnel only. The use of optical instruments with this product will increase eye hazard. This DVD/CD Duplicator is classified as a CLASS 1 LASER PRODUCT. The CLASS 1 LASER PRODUCT label is located on top of the internal drive enclosure. CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT
www.aleratec.com Table of Contents Introduction ..........................................................................................1 Included Items ............................................................................................1 Key Items – 1:3 DVD/CD RoboRacer MultiDrive SA ..............................2 1:3 DVD/CD RoboRacer MultiDrive SA Display Panel ...........................3 Precautions ..........................................................................................4 Installation ..................................................................................................4 Operation ....................................................................................................4 Overview...............................................................................................5 Main Menu .................................................................................................5 Subfunctions ...............................................................................................6 Using the DVD/CD Duplicator .............................................................8 Main Menu: Disc Duplicate .......................................................................8 Main Menu: Compare .................................................................................9 Main Menu: Image .....................................................................................9 Image Load .......................................................................................10 Image Compare .................................................................................10 Image Burn ........................................................................................11 Image Delete .....................................................................................12 Main Menu: USB Mode ...........................................................................13 Using Image Manager .......................................................................14 Troubleshooting Image Manager ......................................................18 Main Menu: Setup ....................................................................................19 Copy Mode ........................................................................................20 Demo Run .........................................................................................21 Load Firmware ..................................................................................21 Max Disc Error ..................................................................................22 Reset Robot .......................................................................................23 Software ID .......................................................................................22 Erase Disc .........................................................................................23 System Sound ....................................................................................24 Test Mode Set ....................................................................................25 Format Hard Disk ..............................................................................26 Default Reload ..................................................................................27 DVD Burn Speed ..............................................................................28 CD Burn Speed .................................................................................29 Auto Verify ........................................................................................30 Read Error Skip .................................................................................31 Over Burn Mode ...............................................................................32 Nero Essentials Installation ......................................................................33 Creating an Image with Nero ...................................................................34 Specifications ....................................................................................38 Technical Support .............................................................................39 Service and Support..........................................................................40 Technical Support FAX Back Form .................................................43
www.aleratec.com1 Introduction Thank you for purchasing this 1:3 DVD/CD RoboRacer MultiDrive SA. Please read this User Guide thoroughly before using this product. • Page 2 shows the Key Features of the 1:3 DVD/CD RoboRacer MultiDrive SA • Page 3 shows the Duplicator LCD Display Panel. Included Items • 1 1:3 DVD/CD RoboRacer MultiDrive SA • 1 Disc Output Bin Holder • 1 Side Disc Output Bin Holder • 1 150-Disc Capacity Disc Output Bin • 1 50-Disc Capacity Disc Output Bin • 4 150-Disc Capacity Guide Rods • 1 USB 2.0 Cable • 1 Power Cord • UK Power Adapter (EU version only) • EU Power Adapter (EU version only) • Software/User Guide CD
www.aleratec.com2 Introduction Key Items – 1:3 DVD/CD RoboRacer MultiDrive SA 1 5 8A B 1. Clear Plastic Disc Guide Rods 2. LCD Display Panel 3. Control Panel 4. Disc Burning Drives 5. Disc Input Bin 6. Protective Cover 7. Disc Bin Holder 8. Disc Output Bin A. Power Plug B. High Performance Cooling Fan C. USB 7 2 3 6 4 C
www.aleratec.com3 Introduction 1:3 DVD/CD RoboRacer MultiDrive SA Display Panel 1 Display shows all functions and messages 2 Power Indicator - this LED also doubles as an activity LED and changes colors when a disc is being burned etc. 3 LEFT Scroll Button 4 RIGHT Scroll Button 5 ENTER Button The left and right scroll buttons are used to navigate through the operating menu, while the enter and escape buttons are used to select or cancel menu settings. 6 ESCAPE Button 32 Disc Duplicate 4 56 1 ENTESC
www.aleratec.com4 Precautions Before installing your 1:3 DVD/CD RoboRacer MultiDrive SA, please read the following. Installation Avoid placing the 1:3 DVD/CD RoboRacer MultiDrive SA in a location subject to: • High humidity • High temperature • Excessive dust • Mechanical vibration • Direct sunlight • Electromagnetic radiation Operation Do not move the 1:3 DVD/CD RoboRacer MultiDrive SA during operation. This may cause it to malfunction during operations. Note: Choose a Good Location 1. Allow adequate clearance for moving parts. 2. When placing the duplicator on the side/edge of a tabletop ensure that all four foot pads are in complete contact with the surface of the table. 3. Do not place near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. 4. Good care will help assure maximum product life. Improper operating environment and misuse may void the warranty. 5. Turn the duplicator off and leave unplugged when not in use.