Home > Aleratec > Hard Disk > Aleratec 116 USB 30 Copy Tower Duplicator User Guide

Aleratec 116 USB 30 Copy Tower Duplicator User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Aleratec 116 USB 30 Copy Tower Duplicator User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							www.aleratec.com17
    Using the USB Dupli\ccation Suite Softwa\cre
    3. If you wish to remove an added file or folder, select the item and click 
    “Remove.” To clear the list of files/folders to add, click “Clear.”
    4. If you wish to verify the source data is copied successfully, click to 
    check the box next to “Verify Data.”  
    						
    							www.aleratec.com18
    Using the USB Dupli\ccation Suite Softwa\cre
    Format Then Data C\copy•-•co\bt\f\bued•
    5. Once you have added all the files/folders you want to copy, click the tab at 
    the top of the window named “Destination.”
    6. Select the drives that you wish to format. You can click the button with 
    the green “+” symbol to select all drives or the button with the red 
    “-” symbol to deselect all drives. The button with the blue arrow will 
    refresh the current list of drives.  
    						
    							www.aleratec.com19
    Using the USB Dupli\ccation Suite Softwa\cre
    7. You can specify a single label for each drive in the text box under “Enter 
    Label”. If no label is specified, the label that the drive currently has will 
    be used.
    8. The “Processes” counter displays how many concurrent processes you 
    want to run at once. The more processes you choose the more drives 
    will be copied to simultaneously.  
    						
    							www.aleratec.com20
    Using the USB Dupli\ccation Suite Softwa\cre
    Format Then Data C\copy•-•co\bt\f\bued•
    9. The “Copies” counter shows the total number of copies you want to 
    make. If the number of copies specified is more than the number of 
    available drive slots, the software will break up the job into multiple 
    “rounds,” requiring the user to switch in new targets after each round is 
    completed. 
    10. Once the drives, processes, and copies are specified, the user may click 
    “Start” to begin the duplication process.  
    						
    							www.aleratec.com21
    Using the USB Dupli\ccation Suite Softwa\cre
    11. Progress is displayed through messages in the log and in the progress 
    bar. Also, the number of completed and rejected copies is displayed 
    underneath the output log.
    12. If the user wishes to cancel the duplication process at any time, just 
    click “Cancel.”  
    						
    							www.aleratec.com22
    Using the USB Dupli\ccation Suite Softwa\cre
    Create Image File
    Use this function to create an image file from a single USB flash drive. 
    1. From the main menu, choose “Create Image File.” The “Create Image 
    File” module will then pop up.
    2. On the left hand side of the screen, you will see a drop-down menu 
    with a list of current drives available. From here, you may choose 
    which drive you want to make an image of. If the desired drive does 
    not appear in this list, you may hit the “Refresh” button located at the 
    bottom of the screen to refresh the list. If there are still problems then 
    skip ahead to the section titled “Drive Letter Management.”  
    						
    							www.aleratec.com23
    Using the USB Dupli\ccation Suite Softwa\cre
    3. In the box labeled “File Name,” you may enter the name of the newly 
    created image. Include “.img” at the end of the name. All image files 
    are automatically saved in C:\USB_imagefiles\.
    4. Click on “Start” to begin the image creation process. A DOS window 
    will pop up to indicate that the image is being created. Please wait until 
    this screen closes.  
    						
    							www.aleratec.com24
    Using the USB Dupli\ccation Suite Softwa\cre
    Clone Image File
    1. From the main menu, choose “Clone Image File.” The “Clone Image 
    File” module will then pop up.
    2. Click the “Browse” button on the left hand to select the image file that 
    you want to clone. The name of the image file will appear in the box 
    above the “Browse” button.
    Note: Make s\fre that yo\fr\s selected image file \s\bOES NOT exceed the capacity\s of the smallest flash drive t\shat yo\f are copying t\so.  This will res\flt in fa\sil\fre.  
    						
    							www.aleratec.com25
    Using the USB Dupli\ccation Suite Softwa\cre
    3. Select the drives that you wish to clone to. You can click the “Select 
    All” or “Deselect All” buttons to select or deselect all the drives in the 
    list, respectively. You may also click the “Refresh” button to refresh 
    the list of drives, if the desired drive is not in the list. If there are still 
    problems, skip ahead to the “Drive Letter Management” section.
    4. Click the “Start” button to begin the cloning process. A DOS window 
    will pop up to indicate that the image is being cloned. Please wait until 
    this screen closes. 
     
     
     
        
    Note: This process relies on\s the image file and d\sirectory being free \sfrom being locked by any other progra\sm.  For best res\flts\s, please close all \sother applications (\sincl\fding all instances of Wind\sows Explorer) befor\se starting this f\fnct\sion.  
    						
    							www.aleratec.com26
    Using the USB Dupli\ccation Suite Softwa\cre
    Drive Letter Manag\cement
    This module will search your computer for any removable media that do not 
    have any drive letters associated with them and will appropriate one for them. 
    You may use this module if your removable media is not being displayed while 
    using this software.
    1. From the main menu, choose “Drive Letter Management.” The “Drive 
    Letter Management” module will then pop up.
    2. Click the “Start” button to begin the process. You will see two DOS 
    windows pop up. The first will remove the drive letters from any removable 
    media with drive letters on them. The second will reapportion the letters to 
    all removable media so that previous media that did not have a drive letter 
    associated with them will now. Do not close the DOS windows until the 
    process is complete.  
    						
    All Aleratec manuals Comments (0)

    Related Manuals for Aleratec 116 USB 30 Copy Tower Duplicator User Guide