Home > Aleratec > Hard Disk > Aleratec 116 USB 30 Copy Tower Duplicator User Guide

Aleratec 116 USB 30 Copy Tower Duplicator User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Aleratec 116 USB 30 Copy Tower Duplicator User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							www.aleratec.com7
    Using the USB Dupli\ccation Suite Softwa\cre
    5. Once you have added all the files/folders you want to copy, click the 
    tab at the top of the window named “Destination”.
    6. Click to select each USB flash drive that you want to copy to. You can 
    click the button with the green “+” symbol to select all drives or the 
    button with the red “-” symbol to deselect all drives. The button with 
    the blue arrow will refresh the current list of drives.  
    						
    							www.aleratec.com8
    Using the USB Dupli\ccation Suite Softwa\cre
    Data Copy Only -•co\bt\f\bued•
    7. The “Processes” counter displays how many concurrent processes you 
    want to run at once. The more processes you choose the more drives 
    will be copied to simultaneously.
    8. The “Copies” counter is the total number of copies you want to do. If 
    the number of copies specified is more than the number of available 
    drive slots, the software will break up the job into multiple “rounds”, 
    requiring the user to switch in new cards after each round is completed.  
    						
    							www.aleratec.com9
    Using the USB Dupli\ccation Suite Softwa\cre
    9. Once the drives, processes, and copies are specified, the user may click 
    “Start” to begin the duplication process.
    10. Progress is displayed through messages in the log and in the progress 
    bar. Also, the number of completed and rejected copies is displayed 
    underneath the output log.  
    						
    							www.aleratec.com10
    Using the USB Dupli\ccation Suite Softwa\cre
    Data Copy Only -•co\bt\f\bued•
    11. If the user wishes to cancel the duplication process at any time, just 
    click “Cancel.”  
    						
    							www.aleratec.com11
    Using the USB Dupli\ccation Suite Softwa\cre
    Format Only
    Format one or more USB flash drives with this command (FAT formatting 
    only). A volume label to identify the media is added at the same time.
    Note: The “Add File” interf\sace will be disabled \ssince it is not \fsed.
    1. Start by clicking on “Format Only” from the drop down menu. 
    2. Click on the “Destination” tab located at the top of the window.  
    						
    							www.aleratec.com12
    Using the USB Dupli\ccation Suite Softwa\cre
    Format Only -•co\bt\f\bued•
    3. Select the drives that you wish to format. You can click the button with 
    the green “+” symbol to select all drives or the button with the red 
    “-” symbol to deselect all drives. The button with the blue arrow will 
    refresh the current list of drives.
    4. You can specify a single label for each drive in the text box under 
    “Enter Label.” If no label is specified, the label that the drive currently 
    has will be used.  
    						
    							www.aleratec.com13
    Using the USB Dupli\ccation Suite Softwa\cre
    5. The “Processes” counter displays how many concurrent processes you 
    want to run at once. The more processes you choose the more drives 
    will be copied to simultaneously.
    6. The “Copies” counter is the total number of copies you want to do. If 
    the number of copies specified is more than the number of available 
    drive slots, the software will break up the job into multiple “rounds”, 
    requiring the user to switch in new cards after each round is completed.  
    						
    							www.aleratec.com14
    Using the USB Dupli\ccation Suite Softwa\cre
    Format Only -•co\bt\f\bued•
    7. Once the drives, processes, and copies are specified, the user may click 
    “Start” to begin the duplication process.
    8. Progress is displayed through messages in the log and in the progress 
    bar. Also, the number of completed and rejected copies is displayed 
    underneath the output log.  
    						
    							www.aleratec.com15
    Using the USB Dupli\ccation Suite Softwa\cre
    9. If the user wishes to cancel the duplication process at any time, just 
    click “Cancel”.  
    						
    							www.aleratec.com16
    Using the USB Dupli\ccation Suite Softwa\cre
    Format Then Data C\copy
    This function will format and then copy files/folders to one or more USB 
    flash drives. Any files/folders on the target device(s) with the same names as 
    any source files/folders will be overwritten.
    1. Start by clicking on “Format Then Data Copy” from the drop down menu.
    2. On the same screen, click “Add Files” to copy individual files or “Add 
    Folder” to copy an entire folder.
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     Note: Make s\fre that yo\fr\s selected data \bOES \sNOT exceed the capacity\s of the smallest flash drive t\shat yo\f are copying t\so.  This will res\flt in fa\sil\fre.  
    						
    All Aleratec manuals Comments (0)

    Related Manuals for Aleratec 116 USB 30 Copy Tower Duplicator User Guide